Search the Community
Showing results for tags 'rgh/jtag'.
Found 6 results
[Request] Midnight Club Los Angeles Trainer
dr3kozmodz posted a topic in Requests and SuggestionsI have been trying to get this trainer for mcla to work I just get black screened and sent back to Aurora Dashboard. I have the trainer_loader.xex I'm the game directory but it's not even loading the trainer. Yet alone I even put it in the trainer folder and it doesn't show it. To activate the trainer it says back + dpad down but nothing happens or loads.
GRAW2 LE, correct multi disc setup??
Rick_C-RGH posted a topic in SupportHas anyone installed Ghost recon advanced warfare 2 legacy edition to a JTAG or RGH ?? Can't seem to find any mention of anything regarding this game on the web, I installed splinter cell black list to my RGH hdd perfectly fine by converting both disc 1 & 2 to god then creating a file structure with separate disc folders and finally extracting the HD content to the folder with 16 zero's, so i'm just wondering if this method will work with GRAW2 legacy edition also, as GRAW2 doesn't have HD content, it has the base game on disc 1 and extra dlc on disk 2 so i'm thinking i can obviously skip the content step and convert both discs to god then set up the separate disc folders like i did with splinter cell and all should work? Or what is the best way to set up GRAW 2 Legacy edition to your knowledge?
skyrim Skyrim Mod SuggestionsWhat kinda mods do you suggest converting to enhance my overall play? If it helps I love magic, but the spells in the vanilla game are lacking I also like archery and thievery.
Error injustice and mortal kombat RGH
bichert74 posted a topic in Other topicshello very good I have a problem with the game Injustice Gods Among Us and Mortal Kombat 9 on my RGH console, when I start it says "dirty disk" error please clean, I have tried everything such as downloading it from another page, running it from disk Hard internal and external but nothing works, the most curious thing is that a few months ago I had those 2 games and I was going perfectly but now those errors jump exactly in those 2 games, help!
r987_ posted a topic in Other topicsI was recently playing my rgh xbox360 slim, it was connected with an ethernet cable to the LAN. When I clicked aurora home, it rebooted and went into the normal (outdated retail) dash and said something about updating the xbox has failed. Eject button isn't working at all therefore can't boot into xell. When I boot normally it sometimes goes to the dash and sometimes red ring with some error number, a few times it even booted into aurora and then immediately rebooted. The device doesn't seem to recognize the hard drive, I tried putting my hard drive in another xbox an it did recignize it. I have no backup of the nand dump. Is it possible to fix this? Thanks in advance.
Setting Up RGH/JTAG Console From Scratch
Areeb Ashar posted a topic in TutorialsSETTING UP YOUR NEW JTAG OR RGH XBOX 360 Just got your hands on that sweet RGH or JTAG Xbox of yours? Perfect! Feeling overwhelmed with all the updating, connecting, more updating and even more setting up? This tutorial will teach you how to set-up your console from scratch, all the way from the beginning to pretty much everything. Everything you do here is basically MANDATORY FOR RGH/JTAG USERS! Lets get started! THE FIRST BOOT & SETTING UP FSD (FREESTYLE DASH) So you've turned on your Xbox, and you're taken to the main dashboard, something that looks like this: Moving on - this dashboard is the old basic boring one. If you're happy with it, stick with it. But if you're looking at some cool stuff, let's move on, shall we? So, to start it off, you need a USB Stick. Any USB stick. Has to be at least 2GB though. Plug it into your Xbox 360, into any USB Port, and press on the Right Bumper (RB) until you get to the last page on the basic dashboard. Go ahead and Select 'System Settings' and navigate to 'Storage'. Now highlight your USB device, and press A on it and configure the USB. After a few minutes, your UBB will be configured to your Xbox. You may now unplug your USB. Head to your PC, hopefully Running Windows (Tutorial will use Windows), and run Horizon (Installation .exe attached below - named 'Horizon Setup.exe' or from right here â‡¢ or download it from here). Horizon is a very useful tool used for many things moving forward in the RGH and JTAG community. But for now, open it up, and plug in your USB. It should recognise your USB, and you should get a screen that looks something like this: I'm assuming you did get something like that â‡ˆ, if you didn't, try re-configuring your USB in the Xbox and Plugging it in again on your PC with Horizon open. Now, download XEXMenu (also attached down below or right here â‡¢ or you could just get it from here). Extract the .zip file by right-clicking on the downloaded file, and clicking on extract. Once extract is complete, you should see a file named something like 'C0DE99990F586' and a bunch of stuff after that in a folder named XEXMenu. Drag and drop that file into Horizon with the USB plugged in, and a popup within Horizon will come up. On the top right corner, click on 'Save to Device' and select your USB (Flash Drive). Now wait till another popup comes saying that the process has completed. Once done, just pull out your USB. We're going to go back to your Xbox, and we are going to plug in the USB. Navigate your way to 'System Settings', then to 'Storage' and press 'Y' when you're highlighting your USB device. Move everything on the USB stick to your consoles HDD (Hard Disk Drive) or Memory Unit. Once done, we no longer require the USB - for now. Get back to the main basic Dashboard, and get to games. Run the game demo named 'XEXMenu 1.2'. Back on your PC, download FreeStyleDash (a.k.a FSD) (not attached below but you can get it from here). While you wait for the download to complete, plug back in the USB that was configured to your Xbox and format it to your PC. Now you should be able to use it as a normal USB. So once the download completes, extract and move the folder named FreeStyleDash3 to your USB, looking something like this: Go back to your Xbox, plug the USB in, and if you are following this properly, you should have XEXMenu opened up. It should automatically open up your USB - but f it doesn't just press on the Right Bumper (RB) until you get to it. Navigate and highlight the FSD (FreeStyleDash3) folder, and Copy it by pressing on the 'Y' then 'A'. Press 'X' and select your HDD (press 'A' on it) and paste the folder there by pressing 'Y' and selecting 'Paste'. Let it finish. Once its done, remove your USB - and navigate in your HDD to inside the FreeStyleDash3 Folder, and run 'default.exe' by highlighting it and pressing 'A'. Wala! Your new custom Dashboard! Eat some Ice-Cream! SETTING UP CONSOLE TO BOOT DIRECTLY TO NEW DASHBOARD (DASHLAUNCH) Okay - so you've installed FSD, but whenever you turn on your Xbox, it boots into the basic old BORING dashboard! Lets fix that. Open up XEXMenu and get that USB. Head to your PC and Plug it in. Download Dashlaunch (Attached down there â†´ or just get it from here â†’ or download from here). Extract and put it onto your USB. Go back to your Xbox, plug it in, and in XEXMenu, do the same process of Copying and Pasting the folder of Dashlaunch to your HDD (If you didn't read how to, it the paragraph right above this one â‡ˆ). After copying completes, remove the USB, and open the DashLaunch folder in the Xbox. Open the other folder inside named 'Installer' and run the file named 'default.xex' inside. If you get a pop up windows asking to update, go ahead and update. Now, press 'A' on 'Paths' and go down to default. Press 'A' on it, and then browse to your FSD (FreeStyleDash3) folder and press 'A' on the 'default.xex' file, like this: Now press 'A' on Paths again, and the menu will close. Press 'A' on Network and press 'A' on pingpatch to enable it. Next, just make sure liveblock is enabled, because you don't want a banned Xbox:banned: , now do you? Now one last thing - close the Network menu by pressing 'A' on Network, and go down to Configurator and press 'A'. Enable ftpserv. Don't screw with anything else. Press RB (Right Bumper) and you should get a screen like this: Highlight your main HDD or MU (Memory Unit), in my case, HDD and press 'X' on it, then press 'A' on it. Now press 'B' to exit Dashlaunch - you should now load up into FSD! Thats it! INSTALLING AND RUNNING GAMES WITHOUT A DISK So, now you've got an xbox that's got Dashlaunch, that has FSD installed - so lets get those Xbox DVDS hanging around on your Game Lists! Boot up your console, and guess what - it booted straight to FSD! YAY! Navigate to DVD Extract, which will look something like this: Select it, and your DVD drive will come out. Put in your game, and click on Okay. Your DVD drive will go back inside. Now just wait a bit, Information on your game will be extracted. Choose your destination path and click on 'Start Extract' Now wait until completed. Once complete, navigate back to the 'Settings' menu in FSD, down into 'Content', and down to 'Manage Game Paths'. Press 'Y' and click 'A' on change path. Navigate to the path that you extracted your game, and open the folder up so that you can see the 'default.xex' file inside. Press 'Y' to select the directory. Now on Scan Depth, increase it to the number of directories you entered, so in my case below, four. Now just press 'X'. Go back to the dashboard menu, and wait for about 30 seconds. Now just go to games, and your game is there! Congrats! Have a drink! GETTING THE WEATHER ON YOUR CONSOLE Alrighty! Some done, more to go! Tired? Better feel for me - I typed all this for YOU! If you haven't noticed yet, the pictures above show the weather, because my console has the weather application set-up on it! Lets show you how to do that! So first off, go to Settings, and go to General Settings. Now go to Weather Settings. In the textbox beside or under ApiKey, enter one of the following ApiKeys: 1) y9s7fy2gm8bjbmbrdahdums6 2) 7upfgf44xs3t9xeh8wcxcztz It should look something like this: Now enter your Zip code or City name in the respective box, and select your city in the box underneath (The big gray box in the screenshot above). Once done so, press 'B' and go to General Settings, and enable 'Show Weather on Startup'. You might even want to enable 'Display Temperature in Celsius'. Re-Boot your Console. Your dashboard will now have the weather like below: Now check out your temperature! UPDATING TO THE LATEST DASHBOARD NON-CORONA & CORONA This part of the tutorial will cover updating to the latest dashboard on any other console other than a Corona. If you don't know your console type, just run DashLaunch and look at the bottom right corner. So to begin, you'll need your Console's CPU key. Get it by running DashLaunch, and pressing RB until you get to 'Miscellaneous', and press 'A' on 'System Info' Your CPU key will be written on the top left of the window. Write that down somewhere. Go to your PC, and plug in your USB. Download and extract 'Simple 360 NAND Flasher (attached below, or download from here â†’ or just get it from here). Copy the entire extracted folder to your USB and plug the USB into your Xbox. On your console (im assuming you are running FSD) navigate to File Manager, open up your usb, and browse to inside the directory of 'Simple 360 NAND Flasher', and run the 'default.xex' file inside. You will want to dump your nand to a file, so press 'X'. Wait for the process to complete. Once complete, press any button to exit. Pull out your USB, and head over to your PC. Run xeBuild, which is the file named 'xeBuild GUI 2.0.exe' (also attached below, or download from here â†’ , or from here). Plug in your USB. In xeBuild, beside Source, click on 'Open' and browse for the file named something like 'flashdmp.bin' in the Simple 360 NAND Flasher Folder. Then click on 'Save' Underneath, and select the same folder. Now, enter the CPU Key we extracted earlier in the textbox beside CPU Key. Under the place where you enter your CPU Key, Click on the drop down menu under Kernel Version and select the latest version (currently 16547). Now for MAKE SURE YOU CHECKMARK 'DISABLE FCRT.bin CHECK'. Click on 'Generate Hacked Image' on the bottom of the window. Wait for the process to complete. There will be a popup, click on 'Yes'. Now remove your USB and go back to your Xbox. Plug it back in, and rn Simple 360 NAND Flasher again. This time however, press 'A' to flash your NAND. Wait for the process to complete. Your console will shutdown. Wait with your console off for 40 seconds, and turn it back on. If when turning on, the Xbox Logo comes up, you're good to go! GETTING THE AVATAR UPDATE (IF YOUR AVATAR IS NOT SHOWING UP) So your lovely avatar is all greyed out! Lets fix that! Considering you're on the latest dashboard (which you have to be), the avatar update is one easy thing. On your PC - go to the Xbox Update website (or click here) and scroll down to 'Copy to a USB Flash Drive', and download the Update File. Plug in your USB, and extract the folder inside and move the ENTIRE $Sytemupdate Folder onto the ROOT of your USB Drive. Once complete, rename the folder to $$ystemupdate and remove your USB from the PC. Run on your Xbox console, and wait for FSD to completely load. Once so, press the Xbox Guide button, press RB all the way to the end, and select System Settings. Once System Settings is open, press 'B' until you are on the Basic original Dashboard. Now Plug in your USB, and a popup should come up saying to update, so UPDATE! PREPARING FILE TRANSFER PROTOCOL (FTP) Lets learn how to control and transfer files on our Xbox without a USB! First off, you need a PC connected to the Internet. Then you need a Xbox connected to preferably the same internet network. If you don't know how to connect your Xbox to the internet, Press the Guide button on the Xbox controller, then RB until you get to the end. Select 'System Settings' and it the same drill as always from there, except for the part that you will get an error in the verifying connection to Xbox Live, so dont freak out no me over here. So back on the PC, we need a FTP Client. I prefer GODspeed, as it is based completely to match your xbox needs, but you can use any other client such as FileZilla as well. So open up GODspeed or FileZilla (download from below or here â†’ or from here or here), and follow your respective tutorial below: FOR GODspeed â†´ Okay, so get GODspeed open on your PC, and Turn on your Xbox. Once your xbox is on and booted up in FSD, take note of the number on the bottom left corner (if you are still in the default skin). It should be something like '192.168.0.12'. If you dont see it, try pressing the Right Joystick inward, so you hear the 'click'. Now the number should come in the bottom left. If it says N/A, you haven't connected your Xbox to the internet correctly. Back on GODspeed, you will see the main window divided into two sections, one on the right, for your Xbox, and one on the left, for the directories of your PC. Click on 'New Connection' and in the popup that comes up, enter the details as you wish, except where it says Address, enter the number you noted down from the bottom left corner of your FSD homepage. The port should still be 21, unless you screwed around with it, which we didn't here. Now one last step, When you are filling out your console's information inside, make sure you click on the 'Change' button and enter 'xbox' (without the '') for both username and password. Then just click Okay and you're good to go! Now just double-click on your console to connect to it! To transfer files.ect, look at the commands on the bottom of the window. Your setup should have looked something like this: FOR FileZilla â†´ Okay, so get FileZilla open on your PC, and Turn on your Xbox. Once your xbox is on and booted up in FSD, take note of the number on the bottom left corner (if you are still in the default skin). It should be something like '192.168.0.12'. If you dont see it, try pressing the Right Joystick inward, so you hear the 'click'. Now the number should come in the bottom left. If it says N/A, you haven't connected your Xbox to the internet correctly. Back on FileZilla, you will see the main window divided into several sections, mainly consisting of one on the right, for your Xbox, and one on the left, for the directories of your PC. On the top of the window, there is a textbox beside 'Host'. In there, enter the number we noted down earlier from FSD. Next, just put 'xbox' (without the '') for username and password, and leave port as 21. Click on connect, and you're up and going! Your setup should have looked something like this: You probably felt like all this went over your head! ENJOY YOUR NEW CONSOLE SETUP! All the files used in this tutorial so far can be downloaded as a bundle, including all the source files and pictures.ect from here