JPizzle

well.... you could always use Fusion

Just wanted to wish you a Happy Halloween from everyone at RealModScene.com

We have not added the ability to launch LibXenon (.elf files) homebrew from F3, you will need to use XeLL or DashLaunch for now.

This is most likely why you are having issues, set separate paths for each content type (xbla, homebrew, 360 games) and set it to that specific content type. Also don't set the scan depth deeper then it needs to be.

yes, the folder needs to be in the same directory as the elf but they can go wherever you like.

then why does it show your path as Usb:\

you need to launch the dashlaunch installer app and use the file manager in it to navigate to ANY .elf file. You can place it anywhere you want and name it whatever you want.

Clear your DB and add the path again, I would also suggest moving your games into a games folder on your USB Usb:GamesMW3

you need a network connection to add art.

The console must be slow to get an IP from the router so there is no connection by the time F3 is loaded, assigning a static IP might help.

Well, the original fans pull hot air out so I think the best bet would be to force more air (cool) into the box in the first place but the choice is yours and I'm sure someone will disagree with me

thank you but we know what the issue is already just haven't gotten around to fixing it yet, very busy working on great new exciting stuff.

or just read the readme

thank you for your support and we actually are already working on a skin to match the site

Here is a monster update to compliment yesterday's LT Ultimate fw news. Going out with a bang for sure Note: All nonsense and garbage posts 9including posts asking for release dates and prices of things) will be deleted and accounts probably deleted. If you want to post shit either join facebook or use some other forums where they don't give a damn about quality control. NEWS #1: CR3 PRO It's been 6 months in the making (no thanks to several motherboard/dashboard revisions during our development time), and now after an exhaustive test run, the CR3 Pro is ready for public consumption. This is aimed at users who demand the highest RGH performance possible and the ability to tune their settings to an extreme level. The first release of CR3 Pro is designed for slims only. The full kit includes new V3 QSB's for Trinity, Corona v1 (16MB Hynix TSOP) and v2 (4GB Phison BGA) (These are also available to buy separately for use with legacy CoolRunners Rev A, B & C and also the CR3 Lite and a Phat version V3 QSB kit is also available - See News #5). A Brand new POST V2 for complete monitoring and tuning using the new CR3 Pro Rater software is also included (J-R Programmer v2 required - See News #6) Note: For Corona v2 (4GB) Nand Read/Write you will need the 4GB RW Kit. CR3 Pro Installed to a Corona v1: CR3 Pro Rater Screenshot: A dedicated CR3 Pro Phat version is in progress - currently having fun with "un-glitchable" zephyrs and falcons Full details / specs / install pics / prices / release date etc will be available shortly. NEWS #2: CR3-DGX The CR3-DGX is an add-on that connects to the CR3 Pro. We have been working on this bad boy for some time - it's really kick-ass and only made possible by the high level of accuracy and timing of the CR3 Pro. Features: Fast Recovery of CPU/DVD Key from 2.0.15572.0 - Tested on Trinity, Corona v1 & Corona v2 (4GB) Fast Recovery of CPU/DVD Key from 2.0.15574.0 - Tested on Trinity, Corona v1 & Corona v2 (4GB) Fast Recovery of CPU/DVD Key from 2.0.16197.0 - Tested on Trinity, Corona v1 & Corona v2 (4GB) Full details / specs / install pics / prices / release date etc will be available shortlyHere is a shot of the CR3-DGX prototype. It's disguised for obvious reasons: NEWS #3: CORONA V3 (Samsung 64MB BGA) The new Corona v3 with Samsung 64MB BGA hit the market last month in small quantities Several changes however with a couple of tweaks and a new Corona v3 QSB kit we were able to glitch - so don't panic - this one is easily done NEWS #4: DEMON PHAT SB to BB CONVERSION We have completed a simple conversion kit for all DemoN Phat so you can install to any BB 256MB or 512MB without having to buy a new version DemoN. There is also a new firmware which is being tested right now and we hope to have it all released in the next couple of weeks. NEWS #5: J-R Programmer / NAND-X / CoolRunner QSB V3 Kits Now On Sale The new V3 QSB kits are now available which also allow Xell monitoring over SERIAL/UART using the latest version J-Runner software (NAND-X USB Update Cable Required - we designed the software so it could also use this cable without having to design a new one). The new V3 QSB's are also designed to be Plug n Play compatible with both J-R Programmer & NAND-X and offer the cleanest and most optimum RGH install possible. Now on sale with all official resellers: Corona QSB V3 Kit + SERIAL/UART Monitoring using NAND-X USB Update Cable: J-Runner Monitor COM Screen animation - Awesome tool for debugging libxenon apps. Very geeky and also awesome when you can't get a video signal from Xell NEWS #6: J-R Programmer v2 The new J-R Programmer v2 now includes full POST monitoring for the CR3 Pro rater feature. Speed enhancements are also included that puts it within 30 seconds of the high speed NAND-X NEW 2 Version with Full POSt Monitoring and CR3 Pro Rater Support. Also includes speed enhancements (2-3 minutes faster than JRP v1 !) The new TX J-R Programmer V2 has been created to cater to the budget conscious and coded to work hand in hand with the latest version of the J-Runner app. A third of the size of the TX NAND-X and optimized to run faster than any other USB-SPI based tool (Example Speeds: Others average 16M read 7m 20s, JRP v2 average 16M read 3mins), this nifty tool can fully read/write NAND over SPI, program CoolRunners or any Xilinx based RGH device over USB and also able to program onboard sounds using the TX SONUS 360 ! Complete with a CR JTAG cable so you simply plug 'n program without any soldering using the latest J-Runner App (needs to be at least Build 283). Also comes with NAND installation wires that have the connectors that are compatible with the NAND-X QSB boards. If you don't use the QSB's you can simply cut off the connectors and do a normal wires only install. The J-R Programmer V2 is also fully upgradeable and can be programmed using the Xecuter X360USB PRO Update app. Onboard LED's indicate Power and BootLoader mode. RED LED: Bootloader Mode (Switch to the left) GREEN LED: J-R Programmer Mode (Switch to the right) RED LED FLASHING: R/W Activity & POST Activity (Switch to the right) Features: Fast NAND Programming Fast XILINX CR JTAG Programming Compatible with all CoolRunners inc the new CR3 Pro Supports Full Post Monitoring Compatible with both Phat and Slim Onboard LED's indicate Power & Data Easy Install System Compatible with All NAND-X QSB's Includes Cable For QSB V3 Kit or Wires Install (QSB V3 Kits Sold Separately) Includes Cable For Xilinx CRJTAG Includes Cable for Xecuter Sonus 360 (Sonus 360 QSB Sold Separately - Trinity Kit or Corona Kit) Includes KIOSK option for Remote On Built-in Programmer For Future Firmware Upgrades Designed for the latest J-Runner App (Build 283+) Rock Solid Design – Tested by the J-Runner Team Supports New QSB V3 Kits (Solder Separately) Supports Sonus 360 Programming Affordable – We Provide You With More For Less ! High Quality & Trusted TX Design Source: http://team-xecuter.com/forums/showthread.php?t=95156

be sure to save your ini after pointing it to F3

You wanted more info……. How about one version Unlocked DVD PCB running a new Live Play & Update safe and tested LT Ultimate fw from C4E for all slims including: Liteon DG-16D4S 9504 (Tested & 100% Complete) Liteon DG-16D4S 0272 (Tested & 100% Complete) Liteon DG-16D4S 0225 (Tested & 100% Complete) Liteon DG-16D4S 0401 (Tested & 100% Complete) Liteon DG-16D4S 1071 (Tested & 100% Complete) Liteon DG-16D5S 1175 (Tested & 100% Complete) Liteon DG-16D5S 1532 (Tested & 100% Complete) Hitachi DLN10N 0500 (Tested & 100% Complete) Hitachi DLN10N 0502 (Tested & 100% Complete) It also no longer matters if you had a previous full fw dump or not. DVD Key only required. Now you know why we showed the fw name as LT Ultimate. Is this good enough for you ? Here is a video demo of another world first – a Liteon DG-16D5S 1532 working with the new LT Ultimate Firmware and the new PCB Upgrade…. Source: http://team-xecuter.com/

PS3 CFW users will be very happy to hear that Rogero has released his latest version of his CFW and it now brings 4.30 support, but that's not all folks. DeanK has also updated MultiMAN and SHOWtime has been updated by Andoma. ROGERO CEX-4.30 V1.00 / MULTIMAN VER 04.08.01 / SHOWTIME 04.01.208 For more information and download CLICK HERE

It would seem that you are trying to load some corrupt artwork and that is causing the issue. Remove the XBLA path and then re-add it and re download all art. Be sure to leave the xbox alone and let it download all the art before you start messing around with it again. Disable scan on startup.

To dump NAND/NOR: mmOS->Select any file->Open in HEX viewer->[sELECT]->[sTART]->DUMP LV2(NO)->DUMP LV1(NO)->DUMP FLASH(YES) you should be fine updating directly from Kmeaw

RacerX feel free to attach the files to your post and nice work on the layouts.

do a fresh install, make sure all drives are available when settings scan paths, make sure scan depth is correct for your folder structure and while F3 is scanning and downloading art DO NOT USE THE XBOX, just leave it alone and let it do it's thing.

'Game' is simply what is currently running, it is not a dupe and DO NOT try to delete it.

No, this issue is still present.

it is very possible that the issue stems from our weather provider, thank you for bringing this to our attention.