hamodani 2 Posted June 5, 2015 Hello I had a problem when i downloaded supremacy dlc for advanced warfare, when i click multiplayer it loads up and the mp maps work fine However when i chose exo zombies it say searching for new content and said i have to install something so i can even open zombies to play carrier i even download the compability pack 4 and map pack 3 the both season passes and the tu was from freestyle please help!!!!!!!!!!!!! thx Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted June 5, 2015 Make sure you have ALL the compatibility packs installed, it's NOT enough to have the latest one... Quote Share this post Link to post Share on other sites
hamodani 2 Posted June 5, 2015 yeah i have all the compability pack and have all dlc i cant even open zombies without an error and i seen on xbox360iso.com other people have this issue plz help!!!!!!!!!!!!!!! Quote Share this post Link to post Share on other sites
hamodani 2 Posted June 5, 2015 does anyone else with advanced warfare with the supremacy dlc have exo zombies even open and work Quote Share this post Link to post Share on other sites
RoxasValentine 10 Posted June 5, 2015 Had this problem too, after a quick google search you need to delete some DLCs: http://support.activision.com/articles/en_US/FAQ/Unable-to-Access-Exo-Zombies-Mode-on-Xbox-360/?l=en_US&c=Game_Title%3AAll&fs=RelatedArticle I deleted my "CoD AW Day Zero + Advanced Arsenal Pack DLC" and then it worked. 4 Quote Share this post Link to post Share on other sites
hamodani 2 Posted June 5, 2015 thx ill try WORKS THX SOOOO MUCH Quote Share this post Link to post Share on other sites
bulldock 16 Posted June 6, 2015 Hey, I have opposite problem, Exo zombies work fine but as I load up mp screen where it loads up the save there a error pops up "The Disk is Unreadable". Please help me Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted June 6, 2015 Hey, I have opposite problem, Exo zombies work fine but as I load up mp screen where it loads up the save there a error pops up "The Disk is Unreadable". Please help me That error means you have corrupt data somewhere... or possibly using a too old kernel... make sure you're running 17150 or higher 1 Quote Share this post Link to post Share on other sites
bulldock 16 Posted June 10, 2015 That error means you have corrupt data somewhere... or possibly using a too old kernel... make sure you're running 17150 or higher Well.... got my mistake, I am running 16547 or something like that, but the problem is I do not know what to do now as last time I tried updating my console ( which is a corona) I did something wrong and then it would not boot up. Then I got it fixed from a shop , but this time if a do anything wrong I am sure that I can' do anything as I've shifted from my previous place. The one thing that I did wrong was I think that while there is a countdown of 5...4...3...2..1, I interrupted it and turned off my console at 5...4...3.. , So , now can you exactly tell me how to update my console properly this time?????? Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted June 10, 2015 Well.... got my mistake, I am running 16547 or something like that, but the problem is I do not know what to do now as last time I tried updating my console ( which is a corona) I did something wrong and then it would not boot up. Then I got it fixed from a shop , but this time if a do anything wrong I am sure that I can' do anything as I've shifted from my previous place. The one thing that I did wrong was I think that while there is a countdown of 5...4...3...2..1, I interrupted it and turned off my console at 5...4...3.. , So , now can you exactly tell me how to update my console properly this time?????? Depending on the model you have exactly you may need to use the winbond patch instead of the standard corona patch... Did you have a 4GB Corona or a 16MB Corona? Quote Share this post Link to post Share on other sites
bulldock 16 Posted June 10, 2015 Depending on the model you have exactly you may need to use the winbond patch instead of the standard corona patch... Did you have a 4GB Corona or a 16MB Corona? Well..... I have a 4GB corona...... Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted June 10, 2015 Then you'll have to check with JRunner/AutoGG if CB is 13182, if it is... then you need the Winbond2K patches... Either way, using those patches will work with other models aswell Your interruption of the countdown doesn't matter, once that comes up it's "done" and it just gives you a chance to read any messages sent on the screen before it reboots your console and the messages are gone (they're in the log, but...) Quote Share this post Link to post Share on other sites
bulldock 16 Posted June 11, 2015 Then you'll have to check with JRunner/AutoGG if CB is 13182, if it is... then you need the Winbond2K patches... Either way, using those patches will work with other models aswell Your interruption of the countdown doesn't matter, once that comes up it's "done" and it just gives you a chance to read any messages sent on the screen before it reboots your console and the messages are gone (they're in the log, but...) I don't want 2 get into too much detail...... I remember that the guy who did my rgh updated my console using dashlaunch....... It happened very quick, and I don't remember how he did it..... Can you tell me about that way???? I think that will be easy... Also with it the Avatar update was also installed so it was a one time update.. Also please tell me the easiest way.... where error cannot possibly be done.... Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted June 11, 2015 I remember that the guy who did my rgh updated my console using dashlaunch....... It happened very quick, and I don't remember how he did it..... Can you tell me about that way???? read the second link in my sig, it covers all of that plus more. I personally use j-runner, but any xebuild using app will work. Quote Share this post Link to post Share on other sites
bulldock 16 Posted June 11, 2015 read the second link in my sig, it covers all of that plus more. I personally use j-runner, but any xebuild using app will work. If I use this method is there chance for error and will it work perfectly for my corona 4g....?????? Also would I be needing my CPU key and things like that......?? Also I went to this link http://www.se7ensins.com/forums/threads/how-to-update-jtag-rgh-nand-to-dash-17349-easiest-way-possible.1034192/page-2 do you think it is safe to update my console this way Quote Share this post Link to post Share on other sites
bulldock 16 Posted June 11, 2015 HELPPPPPPPP...... I am stuck in a big problem right now, I tried using a plugin to update my xbox usng upd server v1 and then it said" System error" and now if I try to boot it the green boot light turns red..... PLEASE HELP....... Anything anyone...... :( I can however boot into Xell......;( Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted June 11, 2015 Should not have used v1, should've used v2... Should learn to be patient... some of us have daytime jobs to attend to aswell... You have a 4G corona right? then you need hardware to fix it... 1 Quote Share this post Link to post Share on other sites
bulldock 16 Posted June 11, 2015 Should not have used v1, should've used v2... Should learn to be patient... some of us have daytime jobs to attend to aswell... You have a 4G corona right? then you need hardware to fix it... So what now can I do it by myself or I have to take it to a shop One thing more, I didn't really update it I just pressed X while I was on the xex of standalone Also can you tell me what is causing this problem...... Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted June 11, 2015 What did it say when you pressed X? what else did you do? run some command on your PC? Many things can go wrong... it's hard to tell you what the exact problem is at this point... Quote Share this post Link to post Share on other sites
bulldock 16 Posted June 11, 2015 What did it say when you pressed X? what else did you do? run some command on your PC? Many things can go wrong... it's hard to tell you what the exact problem is at this point... Well.... It said press X to exit as I remember and on pc I pressed Easy Update...... But it could not find my xbox via net..... then suddenly it went to weird screen where I remember that it said system error...... I am now going to get a hell lot of scolding from my father now once he returns from work.... Quote Share this post Link to post Share on other sites
Daniel_Florez 4 Posted June 11, 2015 Hello I had a problem when i downloaded supremacy dlc for advanced warfare, when i click multiplayer it loads up and the mp maps work fine However when i chose exo zombies it say searching for new content and said i have to install something so i can even open zombies to play carrier i even download the compability pack 4 and map pack 3 the both season passes and the tu was from freestyle please help!!!!!!!!!!!!! thx TU 13 is needed...Enviado desde mi GT-I9505 mediante Tapatalk Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted June 11, 2015 Well.... It said press X to exit as I remember and on pc I pressed Easy Update...... But it could not find my xbox via net..... then suddenly it went to weird screen where I remember that it said system error...... I am now going to get a hell lot of scolding from my father now once he returns from work.... weird screen? care to explain? PC? console? Quote Share this post Link to post Share on other sites
bulldock 16 Posted June 11, 2015 weird screen? care to explain? PC? console? Well.... I pressed X on a default xex that I got from XPG Easy Updater from their website....... On the other side on pc I was on the easy updater GUI where I clicked on Easy Update..... Then It gave me an error that xbox cannot be found on network...... After that I pressed X to exit from the xex on xbox..... After that It took me to a screen where was written that System error and the ring of light on my Xbox turned red..... Now whenever I boot up my console the ring of light turns red and then nothing happens...... Is this much info enough or you want more...???? Quote Share this post Link to post Share on other sites
felida 1653 Posted June 12, 2015 Well.... I pressed X on a default xex that I got from XPG Easy Updater from their website....... On the other side on pc I was on the easy updater GUI where I clicked on Easy Update..... Then It gave me an error that xbox cannot be found on network...... After that I pressed X to exit from the xex on xbox..... After that It took me to a screen where was written that System error and the ring of light on my Xbox turned red..... Now whenever I boot up my console the ring of light turns red and then nothing happens...... Is this much info enough or you want more...????Can you press eject and boot xell?? And never, ever use "auto updater" posted by other people, unless swizzy makes it ;-) lol Quote Share this post Link to post Share on other sites
bulldock 16 Posted June 12, 2015 Can you press eject and boot xell?? And never, ever use "auto updater" posted by other people, unless swizzy makes it ;-) lol yes I can boot into xell..... but why are you asking that? Quote Share this post Link to post Share on other sites