JPizzle 0 Posted February 24, 2014 After I press "A" on "Link Console to JQE360.com" I get a message "Failed to connect to server, please check your username and password". Both are correct, I'm using the same username/password as here, as jqe360.com redirects here, right? Can it be some DashLaunch config that's preventing me from connecting? Please help!! go to jqe360.com and reset your password Quote Share this post Link to post Share on other sites
rotchild 4 Posted February 24, 2014 go to jqe360.com and reset your password Already did that, mate... may do it again, if you think it will help. I just don't get why you guys say "jqe360.com" if it redirects here Quote Share this post Link to post Share on other sites
GoJohnny 11 Posted February 24, 2014 Hey, i followed this tutorial, and everything worked out fine, i have tested LINK, and everything passed ok. But the problem is, when i open the mini menu, there is no SYSTEM LINK option. I am working on the latest version, and have installed all the possible updates, does anybody know what could be wrong. I hope you can help me out Quote Share this post Link to post Share on other sites
JPizzle 0 Posted February 24, 2014 Hey, i followed this tutorial, and everything worked out fine, i have tested LINK, and everything passed ok. But the problem is, when i open the mini menu, there is no SYSTEM LINK option. I am working on the latest version, and have installed all the possible updates, does anybody know what could be wrong. I hope you can help me out make sure you are on the latest versions of freeboot and dashlaunch Quote Share this post Link to post Share on other sites
Zain Khan 0 Posted February 24, 2014 Already did that, mate... may do it again, if you think it will help. I just don't get why you guys say "jqe360.com" if it redirects here go to this link and sign in there. if you can't sign in then make new account and then connect this new account in FSD http://covers.jqe360.com/ Quote Share this post Link to post Share on other sites
rotchild 4 Posted February 24, 2014 go to this link and sign in there. if you can't sign in then make new account and then connect this new account in FSD http://covers.jqe360.com/ I managed to connect to the server, but I can't forward my ports, by configuring the router... can't find a proper guide, also :\ Quote Share this post Link to post Share on other sites
Zain Khan 0 Posted February 24, 2014 well then here is a video tutorial. see if that helps....... Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted February 24, 2014 I managed to connect to the server, but I can't forward my ports, by configuring the router... can't find a proper guide, also :\ What model of router/modem do you have? each manufacturer have a different UI (user interface) and they often have different names for each option etc. there are guides showing some of the most popular ones, but not all... it's often also mentioned in the manual how to do it... Quote Share this post Link to post Share on other sites
GoJohnny 11 Posted February 24, 2014 already solved the problem, thanks Quote Share this post Link to post Share on other sites
DaDutch 0 Posted March 17, 2014 I have done the Tut (see video above) but it wont help.i have enabled UPNP but it doesnt work -.- port stays fail. and upnp moden/router not found.maybe you can or someone can help here are the screen. also i put DMZ with the IP of the xbox and JQE360 passbut thats the only one that works Lemme know what i have to do!Robin Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted March 17, 2014 I have done the Tut (see video above) but it wont help. i have enabled UPNP but it doesnt work -.- port stays fail. and upnp moden/router not found. maybe you can or someone can help here are the screen. also i put DMZ with the IP of the xbox and JQE360 pass but thats the only one that works Lemme know what i have to do! Robin It looks like you missed to put the ip for your console in "Doel-IP-adres" i don't speak dutch, but that would be what i assumme is the internal ip (to forward to) Also, you can specify the range like this instead (and thus only have 2 entries): 3071-3072 (then one for UDP and one for TCP unless there is an option for "all" which means both tcp and udp) Quote Share this post Link to post Share on other sites
ToxicxTurtlex 0 Posted April 3, 2014 Um i have set everything up correctly but it still wont let me select the system link button in the mini menu. Any Ideas ? Quote Share this post Link to post Share on other sites
Subodh Kumar 0 Posted April 14, 2014 HELP ME......UPNP ENABLED ROUTER NOT FOUND Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted April 15, 2014 HELP ME......UPNP ENABLED ROUTER NOT FOUND Forward your ports... it should work... Quote Share this post Link to post Share on other sites
VIDAD 0 Posted April 27, 2014 i get into my game the latest version si on, everything is passed but when i press system link it wont load any room or game.. not eaven my acc info. ps i have the latest f 3 Quote Share this post Link to post Share on other sites
VIDAD 0 Posted April 28, 2014 the problem is fixed, i just switched to wireless netwrok and now it works. Quote Share this post Link to post Share on other sites
JAVF319 1 Posted April 30, 2014 hola alguien diganme jqe360.com 404 not found?? muchas gracias Asi no, utiliza esta: http://link.jqe360.com/ Quote Share this post Link to post Share on other sites
JAVF319 1 Posted May 1, 2014 well then here is a video tutorial. see if that helps....... Thanks for the video, everything is working now!. Quote Share this post Link to post Share on other sites
dabik 0 Posted May 17, 2014 Hey i keep getting the auth fail when i test my connection, everything else works fine just using the jqe360 account isn't working I know my user name and password are correct but it keeps saying "Failed to connect to server, check your username and password" Any ideas what's wrong? Quote Share this post Link to post Share on other sites
hassaanarif1 0 Posted May 17, 2014 Ok I got my ports to pass but now I'm getting. JQ360.exe Authentication status: Auth klbarnes1: Fail Any idea on how to fix this? Same here..!!! Followed all steps but unable to sign in to JQE360 from fsd..!!! It shows "unable to connect to server. check ur username and password" although i give right username and password..!! any solution ?? Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted May 18, 2014 Have you doublechecked your username/password? make sure you type it in with caps and such accurately... also, make sure your account has been activated... Quote Share this post Link to post Share on other sites
dabik 0 Posted May 24, 2014 Have you doublechecked your username/password? make sure you type it in with caps and such accurately... also, make sure your account has been activated... how do you check if your account is activated? Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted May 24, 2014 how do you check if your account is activated? Did you click a link you got in your e-mail? Can you sign in to http://link.jqe360.com ? Sent from my GT-I9300 using Tapatalk Quote Share this post Link to post Share on other sites
Talha Ikram 0 Posted July 6, 2014 hey people can u help me please , i did this on one of my xbox and it worked perfectly but when i do it on my other xbox , the menu which comes from pressing xbox guide logo button doesn't change and i dont know what to do ?????????????plz help me quick? only difference was that i didnt update patches in dashlaunch 3.12 ? could that be the cause? and that xbox's dash is 16547 ? Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted July 6, 2014 hey people can u help me please , i did this on one of my xbox and it worked perfectly but when i do it on my other xbox , the menu which comes from pressing xbox guide logo button doesn't change and i dont know what to do ?????????????plz help me quick? only difference was that i didnt update patches in dashlaunch 3.12 ? could that be the cause? and that xbox's dash is 16547 ? The cause is that you don't have the latest F3... Quote Share this post Link to post Share on other sites