Swizzy 2077 Posted March 4, 2016 Use the 4GB Corona RGX ECC's and it should boot, if it doesn't you messed up something with the chip installation most likely Quote Share this post Link to post Share on other sites
Hacked93 0 Posted April 5, 2016 Checking Files Finished Checking Files Trinity Manually Selected CpuKey is Correct Load Files Initiliazation Finished 15574 Couldn't add dashlaunch patches to C:\Users\user\Desktop\Xbox 360 Tools\J-Runner v3 (5) Core Pack\xeBuild\15574\_glitch2m.ini Started Creation of the 15574 xebuild image --------------------------------------------------------------- xeBuild v1.16.728 --------------------------------------------------------------- base path changed to C:\Users\user\Desktop\Xbox 360 Tools\J-Runner v3 (5) Core Pack\xeBuild ---- { Image Build Mode } ---- building retail image ******* WARNING: could not verify pre-decrypted keyvault, please be sure your provided a valid kv.bin! --------------------------------------------------------------- C:\Users\user\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\...\updflash.bin image built, info: --------------------------------------------------------------- Kernel : 2.0.15574.0 Console : Trinity NAND size : 16MiB Build : Retail Serial : ... ConsoleId : ... MoboSerial: ... Mfg Date : 08/03/2010 CPU Key : ... 1BL Key : DD88AD0C9ED669E7B56794FB68563EFA DVD Key : ... CF LDV : 2 KV type : type2 (hashed - unchecked, master key not available) --------------------------------------------------------------- xeBuild Finished. Have a nice day. --------------------------------------------------------------- Saved to C:\Users\user\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\007463103205 Image is Ready Initializing updflash.bin.. Trinity Glitch2 Selected Nand Initialization Finished Load Files Initiliazation Finished 15574 Couldn't add dashlaunch patches to C:\Users\user\Desktop\Xbox 360 Tools\J-Runner v3 (5) Core Pack\xeBuild\15574\_glitch2m.ini Started Creation of the 15574 xebuild image KV Info saved to file Failed And then xebuilt.exe stopped working... I need a donor nand for my trinity... Quote Share this post Link to post Share on other sites
Swizzy 2077 Posted April 6, 2016 Checking Files Finished Checking Files Trinity Manually Selected CpuKey is Correct Load Files Initiliazation Finished 15574 Couldn't add dashlaunch patches to C:\Users\user\Desktop\Xbox 360 Tools\J-Runner v3 (5) Core Pack\xeBuild\15574\_glitch2m.ini Started Creation of the 15574 xebuild image --------------------------------------------------------------- xeBuild v1.16.728 --------------------------------------------------------------- base path changed to C:\Users\user\Desktop\Xbox 360 Tools\J-Runner v3 (5) Core Pack\xeBuild ---- { Image Build Mode } ---- building retail image ******* WARNING: could not verify pre-decrypted keyvault, please be sure your provided a valid kv.bin! --------------------------------------------------------------- C:\Users\user\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\...\updflash.bin image built, info: --------------------------------------------------------------- Kernel : 2.0.15574.0 Console : Trinity NAND size : 16MiB Build : Retail Serial : ... ConsoleId : ... MoboSerial: ... Mfg Date : 08/03/2010 CPU Key : ... 1BL Key : DD88AD0C9ED669E7B56794FB68563EFA DVD Key : ... CF LDV : 2 KV type : type2 (hashed - unchecked, master key not available) --------------------------------------------------------------- xeBuild Finished. Have a nice day. --------------------------------------------------------------- Saved to C:\Users\user\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\007463103205 Image is Ready Initializing updflash.bin.. Trinity Glitch2 Selected Nand Initialization Finished Load Files Initiliazation Finished 15574 Couldn't add dashlaunch patches to C:\Users\user\Desktop\Xbox 360 Tools\J-Runner v3 (5) Core Pack\xeBuild\15574\_glitch2m.ini Started Creation of the 15574 xebuild image KV Info saved to file Failed And then xebuilt.exe stopped working... I need a donor nand for my trinity... You can't build retail with donor KV, retail only works with your original data, the kv you supplied to xeBuild can't be decrypted or verified... Quote Share this post Link to post Share on other sites
xecheezy 0 Posted April 8, 2016 so recently i woke up and thought that my retail was plugged in and i turned it on and there was a dashboard update and i did it and it turned out i forgot i had my rgh plugged in from before and i found out and i wasnt worried at first because i had a backup flashdmp on my pc, But my pc was reset and i lost that backup so i have no way of turning my rgh on and i was wondering if their is anyway around this without having to buy anything or if i do and thats the only way please tell me Thanks Quote Share this post Link to post Share on other sites
Swizzy 2077 Posted April 8, 2016 so recently i woke up and thought that my retail was plugged in and i turned it on and there was a dashboard update and i did it and it turned out i forgot i had my rgh plugged in from before and i found out and i wasnt worried at first because i had a backup flashdmp on my pc, But my pc was reset and i lost that backup so i have no way of turning my rgh on and i was wondering if their is anyway around this without having to buy anything or if i do and thats the only way please tell me Thanks The only way to solve that is to use a hardware flasher to dump your nand and hopefully (depending on the model and chip used) just reflash with a new hacked image Quote Share this post Link to post Share on other sites
xecheezy 0 Posted April 8, 2016 The only way to solve that is to use a hardware flasher to dump your nand and hopefully (depending on the model and chip used) just reflash with a new hacked image do u recommend any i have a corona Quote Share this post Link to post Share on other sites
Swizzy 2077 Posted April 8, 2016 do u recommend any i have a corona Which model of Corona? with or without a internal memory? Quote Share this post Link to post Share on other sites
seraser 0 Posted May 5, 2016 Hi, can I recover an old xenon in 7371 dash but with corrutp nand without data? Quote Share this post Link to post Share on other sites
Dr.Gonzo 390 Posted May 5, 2016 Read the first page of the tutorial. All needed steps are explained in detail. 1 Quote Share this post Link to post Share on other sites
DarkDrink 0 Posted May 18, 2016 Thanks. Very helpfull I installed wrong updflash.bin but if i start ( with the dvd button ) my xbox (jasper bb) the xell is not working just black screen. pls help Quote Share this post Link to post Share on other sites
Dr.Gonzo 390 Posted May 18, 2016 If xell/rgh mode will not boot, you need a Hardware Flasher, to flash your last JTAG/RGH Image again. 2 Quote Share this post Link to post Share on other sites
DarkDrink 0 Posted May 18, 2016 If xell/rgh mode will not boot, you need a Hardware Flasher, to flash your last JTAG/RGH Image again. Can i do it with a matrix nand programer ? Quote Share this post Link to post Share on other sites
Dr.Gonzo 390 Posted May 18, 2016 It Should work. 1 Quote Share this post Link to post Share on other sites
DarkDrink 0 Posted May 18, 2016 It Should work. Can u link a tutorial pls. Quote Share this post Link to post Share on other sites
Dr.Gonzo 390 Posted May 18, 2016 Matrix Nand Programmer solder diagram for phat console. Use Swizzys XeBuild GUI (Tools/ NandPro Operations), for flashing your Nand Image. 1 Quote Share this post Link to post Share on other sites
Minato 0 Posted June 10, 2016 hi gays i have recently update the kernel of my xbox 360 elite 120 gb glitch 2 with the nand flasher and xeBuild GUI 2.0 from 2.016203.0 to 2.0.17489.0 evrything where ok when it's complete i start to do the $System update and by accident i download the 2.0.17502.0 and put it into the xbox it asked me to do the system update and i say yes so it's start to extract the files suddenly the xbox turned off and the process didn't complete but the green light was normaly on and the controller was connected to the console to i turned it off then turned it on and it's won't boot up the green light was in the center of the xbox and the led of the controller blink and nothing was showing on the TV . when i start it by pressing the disc reader it's show normaly the xell or whatever you called it did the xbox breaked ?? I wish that any body can help me please (sorry for my english) Quote Share this post Link to post Share on other sites
Swizzy 2077 Posted June 10, 2016 hi gays i have recently update the kernel of my xbox 360 elite 120 gb glitch 2 with the nand flasher and xeBuild GUI 2.0 from 2.016203.0 to 2.0.17489.0 evrything where ok when it's complete i start to do the $System update and by accident i download the 2.0.17502.0 and put it into the xbox it asked me to do the system update and i say yes so it's start to extract the files suddenly the xbox turned off and the process didn't complete but the green light was normaly on and the controller was connected to the console to i turned it off then turned it on and it's won't boot up the green light was in the center of the xbox and the led of the controller blink and nothing was showing on the TV . when i start it by pressing the disc reader it's show normaly the xell or whatever you called it did the xbox breaked ?? I wish that any body can help me please (sorry for my english) You should be able to dump it again and rebuild, this time tho, use xeBuild GUI 2. 098 and reflash the console from the flash... Sent from my SM-G903F Quote Share this post Link to post Share on other sites
Dr.Gonzo 390 Posted June 10, 2016 hi gays i have recently update the kernel of my xbox 360 elite 120 gb glitch 2 with the nand flasher and xeBuild GUI 2.0 from 2.016203.0 to 2.0.17489.0 evrything where ok when it's complete i start to do the $System update and by accident i download the 2.0.17502.0 and put it into the xbox Your Avatar Update (2.0.17502.0) does not match your installed RGH Dashboard version (2.0.17489.0). Thats the reason your 360 is doenst boot. If your Xbox 360 is Nand based and boot furthermore in Xell, you can created a new fresh 2.0.17502 RGH Image and flash it to your Xbox 360. Please follow this guide here. All needed Steeps are explained in detail. Its very noob friendly. If your Xbox 360 is MMC based, you need a Hardware flasher, to flash your RGH Image to your Xbox 360 back. 1 Quote Share this post Link to post Share on other sites
apolusia_69 0 Posted July 8, 2016 Snes360 Sent from my GT-I9300 using Tapatalk Quote Share this post Link to post Share on other sites
Swizzy 2077 Posted July 8, 2016 Snes360 Sent from my GT-I9300 using Tapatalk What is that a response to?Sent from my SM-G903F Quote Share this post Link to post Share on other sites
chronixx 0 Posted September 19, 2016 Ahh, i see... it can't download as the server it's on is down... Anyways, you cannot FIX bad blocks, they're there... they're normal... what you can do is deal with them by remapping i have tried this method but no luck, no xell boot extracted files to the location(trinity and falcon) but no luck i completely have original dump and the data i got off the console looks corrupted with a lot of missing info in jrunner 2LB[CB_A] AND 2LB[CB_B] info only Quote Share this post Link to post Share on other sites
chronixx 0 Posted September 19, 2016 This tutorial is only for those of you who; lost all of their original and hack nand dumps + erased/corrupted the nand/flash the wrong image to the nand. If you find yourself in this situation then this tutorial will walk you step by step to make your console boot hack dash again. Take note that you won't be able to restore your console to retail ever again and you will be unable to use your dvd drive until you extract the key off of it. Things you will need; usb spi nand programmer(nand-x, jr-programmer, any will do(eMMC R/W kit for corona 4gb) J-Runner the ultimate JTAG/RGH app DOWNLOAD Extracted nand files that match you motherboard model (download below) Step 1; Recovery of cpu key and LDV's Download one of the clean extracted donor nand files according to your motherboard model and extract the containing folder to the location of your choice; Don't use these files to unban your console, first you don't have the original cpu key and second they are all from ban consoles. You have been warned! corona 4gb.rar corona 16mb.rar falcon opus.rar jasper bb.rar jasper sb.rar trinity.rar trinitynofcrt.rar xenon.rar zephyr.rar Next you need to solder/plug in your nand programmer wires onto the motherboard Open J-Runner app an click on "show working folder" button located at the bottom right 1(2).jpg Open the folder name "data" located inside /J-Runner/xeBuild/ folders Open your extracted nand files folder and copy and paste KV.bin, SMC.bin, smc_config.bin and fcrt.bin(if required) to data folder. It should look like this. 2.jpg In J-Runner, copy and paste this cpu key F37C0CD50B928F4E67614ACD548A4E49 in the cpu key section. Choose dashboard version according your hack type (for JTAG choose 7371 - for phat rgh1 choose 14699 - for R-JTAG choose 15574 - for phat RGH2 choose 14719 - for slim choose anything above 14719) Select your motherboard nand type. Select retail as your image type. It should look like this. 3(2).jpg In J-Runner under the Advanced tab click on Create an image without nanddump.bin 4(2).jpg Then you will be ask to enter LDV just enter any number between 1 and 80 and click ok. 5(2).jpg At this point the dummy image should be successfully created and automatically loaded in the "Load Source" section. Now with your nand programmer properly connected to both you pc and motherboard click on "Write Nand". Wait until J-Runner is finish writing the nand and select your "hack type" then click on "Create ECC" for rgh machine or "Create Xell-Reloaded" for JTAG/R-JTAG machine. Now click on "Write ECC" or "Write Xell-Reloaded" depending on your hack type. 6(2).jpg 7(2).jpg You are now ready to boot xell and recover your cpu key. Power on your console and wait for xell to boot. Once xell as booted write down your cpu key, fuseset 02 and fuseset 07 8(2).jpg Understanding and calculating LDV's Calculating CF/CG ldv is fairly simple. Just count the number of "F" in fuseset 07 to fuseset 11. So in the example above we have a cf/cg lock down value of 2. Calculating CB LDV can be a little bit more trickier. You have to take the right-most "F" and calculate how many character it is from the left. In the example above the right-most "F" is 5 characters from the left so we have a cb lock down value of 5. Understanding CB LDV; Quote from Martin C @ TX Quote This value is NOT updated every dashboard version and is not directly reflected in any apps. However, the value can be translated to a CB/dashboard version. You cannot 'edit' your image to use a different CB for a retail NAND. It MUST match the entry as found in XeLL, otherwise it'll fail to boot. The example above is from a Jasper with a cb ldv cseq of 5 and by looking at the chart below we can determine that dashboard 7371 would be the highest version acceptable for this particular console. CB LDV updated.jpg Step 2; Building the fake OG nand image Now back in J-Runner, enter your cpu key in the cpu key section. Select your dashboard according to your CB LDV cseq Select Retail as Image type. Select Motherboard nand type. Click on the "Advanced" tab and on "create an image without nanddump.bin" 9(2).jpg You will be ask for LDV, this is the cf/cg LDV so you enter what you have in fuseset 07 and click "ok" 5(2).jpg You have now created a fake original nand image. Even though you won't be able to boot your console with this image it would still be a good idea to keep it somewhere safe. With your new image loaded in the "Load Source" section and your cpu key in the "Cpu Key" section click on the "kv info" tab. You will noticed that the info in there are obviously not from your console. So now would be a good time, for those who can, to extract your dvd drive key and patch the key vault with the appropriate dvd key. Click on the "XB Settings" tab, click on "Advanced XeBuild Options", paste your dvd key in the "dvdkey" section, click "OK" then click the "Use Edited Options" check box. 11(2).jpg For DG16D5S and DLN10N owners; the easiest and cheapest way to make your dvd drive functional would be to install a TX LTU 2 pcb. Final Part; Building/writing your hack image Back in J-Runner, with your new fake original nand image loaded in the "Load Source" section and cpu key in the "Cpu Key" section select hack image type(Jtag - rgh - rgh2 - r-jtag), select your desired dashboard(should be the latest which is 16537 at the moment of write), select motherboard nand type. You can also edit dashlaunch and xeBuild options at this point. Click on create xeBuild image. You will see 3 or 4 warning messages poping up which will ask you if you want to delete kv.bin, smc.bin, fcrt.bin and smc_config.bin. Click yes on all of them. 10(2).jpg With your nand programmer properly connected to both your console and pc click on "Write Nand" ​ Boot your console and have fun. have tried but its not booting to xell just continue glitching forever with both trinity and falcon can you help Quote Share this post Link to post Share on other sites
Swizzy 2077 Posted September 19, 2016 i have tried this method but no luck, no xell boot extracted files to the location(trinity and falcon) but no luck i completely have original dump and the data i got off the console looks corrupted with a lot of missing info in jrunner 2LB[CB_A] AND 2LB[CB_B] info only Send me your dump and cpukey and i can take a look at it for you after work... Sent from my SM-G903F Quote Share this post Link to post Share on other sites
giga 0 Posted September 25, 2016 Have a problem with 4g toshipa nana cb 13121 and cb b 13182 winbond2k i used donor nand but the xbox stuck on boot . It just frezze . Boot xell with no problem ...i need help please? Quote Share this post Link to post Share on other sites
