metalbruce 6 Posted September 1, 2013 Thanks for the response. I'm not sure what you mean by having the same ip range. I can have both my xbox and laptop connected to my router if that works? Or I can have the laptop using wireless internet and connect to the xbox with lan cable. Quote Share this post Link to post Share on other sites
dementedone 0 Posted September 1, 2013 This is absolutely brilliant! Many thanks for this great piece of software and the easy-to-follow tutorial. Previously, updating my Cygnos JTAG took many steps and a lot of time and patience. And now, it works flawlessly with one simple command. A matter of seconds and it is done. Wow. Just wow. Quote Share this post Link to post Share on other sites
Joshua Ward 0 Posted September 1, 2013 Any ideas why I keep getting this? -------------------------------------- xeBuild v1.07.632------------------------------------------------------------------- { Update Mode } ----data directory set from command line to '16537'started, watching network for xbox...UDP wait timeout!failed to find xbox beacon***** FATAL UPDATE ERROR: unable to find console!--------------------------------------------------------------- xeBuild Finished. Have a nice day.--------------------------------------------------------------- Quote Share this post Link to post Share on other sites
13nikita 0 Posted September 1, 2013 ------------------------------------------------------------------- { Update Mode } ----data directory set from command line to '16537'started, watching network for xbox...UDP wait timeout!failed to find xbox beacon i have this error too.I trying setup on xbox/pc connections(192.168.1.1/2 ; 255.255.255.0 192.168.0.1 etc. ), but i have this error again.Usually i use wifi router, but i tried using lan Quote Share this post Link to post Share on other sites
Anas Fuitsu 6 Posted September 1, 2013 i have this error too.I trying setup on xbox/pc connections(192.168.1.1/2 ; 255.255.255.0 192.168.0.1 etc. ), but i have this error again.Usually i use wifi router, but i tried using lan i have this error too Quote Share this post Link to post Share on other sites
lucius31 0 Posted September 1, 2013 xeBuild v1.07.632 --------------------------------------------------------------- ---- { Update Mode } ---- started, watching network for xbox...success, found xbox beacon at 192.168.1.33 connected to Jasper with updsvr version 1 (peek version 0) *****ERROR: console hv patches are not recent enough to support update mode! update console patches and reboot before trying again. ***** FATAL UPDATE ERROR: unable to parse info reply from console! --------------------------------------------------------------- xeBuild Finished. Have a nice day. --------------------------------------------------------------- i have this error... i don't know how to update the dashlaunch's patches... PS: actual kernel version is 14699 Quote Share this post Link to post Share on other sites
ken 35 Posted September 1, 2013 Any ideas why I keep getting this? -------------------------------------- xeBuild v1.07.632------------------------------------------------------------------- { Update Mode } ----data directory set from command line to '16537'started, watching network for xbox...UDP wait timeout!failed to find xbox beacon***** FATAL UPDATE ERROR: unable to find console!--------------------------------------------------------------- xeBuild Finished. Have a nice day.--------------------------------------------------------------- yip i to get this error Quote Share this post Link to post Share on other sites
jjhhjj554455 3 Posted September 1, 2013 dash launch 3.08 [installed] and enabled updsvr motherboard:Falcon flash:falcon type:glitch kernel:2.0.14699.0 I followed all the steps correctly and when i run this command: xebuild update -f 16537 this is the error I'm getting: --------------------------------------------------------------- xeBuild v1.07.632 --------------------------------------------------------------- ---- { Update Mode } ---- started, watching network for xbox...success, found xbox beacon at 192.168.1.106 connected to Falcon with updsvr version 1 (peek version 0) *****ERROR: console hv patches are not recent enough to support update mode! update console patches and reboot before trying again. ***** FATAL UPDATE ERROR: unable to parse info reply from console! --------------------------------------------------------------- xeBuild Finished. Have a nice day. --------------------------------------------------------------- press <enter> to quit... -------------- I searched all over for this HV stuff to update it but no hope please somebody help Quote Share this post Link to post Share on other sites
jjhhjj554455 3 Posted September 1, 2013 All UDP error timeout just turn off the firewall in OS and in router find the option in both places and turn them off if it did not work try enabling PNP in router 1 Quote Share this post Link to post Share on other sites
jjhhjj554455 3 Posted September 1, 2013 All UDP error timeout just turn off the firewall in OS and in router find the option in both places and turn them off if it did not work try enabling PNP in router also turn of any antivirus 1 Quote Share this post Link to post Share on other sites
Anas Fuitsu 6 Posted September 1, 2013 plz help me i get new error C:UsersanasDownloadsDesktopupdate xboxxbuid>xebuild update -f 16537 --------------------------------------------------------------- xeBuild v1.07.632 --------------------------------------------------------------- ---- { Update Mode } ---- started, watching network for xbox...success, found xbox beacon at 192.168.1.98 connected to Trinity with updsvr version 1 (peek version 2) timeout waiting for data, 0 unable to fetch first 4 bytes, 10054 sending flash data to console... loading avatar data... success! Formatting HDD partition... ERROR: unable to format sysex partition! ***** WARNING: due to previous possible errors, console reboot is not being done it is not recommended to use update mode on this console again until you have determined it's got a good image on it 16537_g2_trinity.bin image built, info: --------------------------------------------------------------- xeBuild Finished. Have a nice day. --------------------------------------------------------------- press <enter> to quit... Quote Share this post Link to post Share on other sites
dokinalexey 0 Posted September 1, 2013 -------------------------------------- xeBuild v1.07.632------------------------------------------------------------------- { Update Mode } ----data directory set from command line to '16537'started, watching network for xbox...UDP wait timeout!failed to find xbox beacon***** FATAL UPDATE ERROR: unable to find console!--------------------------------------------------------------- xeBuild Finished. Have a nice day.--------------------------------------------------------------- Anas Fuitsu how are you fixed this error? Quote Share this post Link to post Share on other sites
itruk 0 Posted September 1, 2013 I'm getting an error too, but different to everyone else's.. **** could not read cf_16537.bin (-1) **** bootloader files are missing. I've followed the instructions and placed the files where they should be, so I'm stumped Quote Share this post Link to post Share on other sites
fejcode 0 Posted September 1, 2013 getting udp time out both locally connected to router thru cable firewall disabled maybe i am missing something at router settings here is a simulator if someone knows if i should disable anything http://www.tp-linkru.com/Resources/simulator/WR842ND(UN)1.0/index.htm Quote Share this post Link to post Share on other sites
Anas Fuitsu 6 Posted September 1, 2013 Anas Fuitsu how are you fixed this error? set your xbox ip (192.168.1.98, 255.255.255.0 , and getway 192.168.1.1)and on pc (192.168.1.20,255.255.0,and getway 192.168.1.1)must connecto xbox to pc via wired lan Quote Share this post Link to post Share on other sites
runwave87 7 Posted September 1, 2013 just updated dash with win8 pc over wireless on both ends. worked great and fast. thanks for the tutorial! 6 Quote Share this post Link to post Share on other sites
fejcode 0 Posted September 1, 2013 thx Anas Fuitsu pc detected xbox and ofc to xebuild team Quote Share this post Link to post Share on other sites
jjhhjj554455 3 Posted September 1, 2013 Finally Done for anyone facing this error *****ERROR: console hv patches are not recent enough to support update mode! update console patches and reboot before trying again. just run this command instead: xebuild.exe client -p which will update the HV for you then shutdown and goto dashlauch again and enable updsrv and run xebuild update -f 16537 now it should work flawlessly happy upgrading 1 Quote Share this post Link to post Share on other sites
iLLNESS 1 Posted September 1, 2013 great feature guys! works amazing! a note to parallel users, it seems as though updserv function will not work when running your VM in a bridged network. it will not locate the xbox. simply setting the network to shared (so it uses the same ip as your osx host) will fix the issue. Quote Share this post Link to post Share on other sites
grabber007 0 Posted September 2, 2013 I got: UDP wait timeout ! failed to find xbox beacon My xbox in the same network with pc (192.168.1.0/24) pc: 192.168.1.2 xbox:192.168.1.11 I can ftp to xbox while DL launched, but cant update Quote Share this post Link to post Share on other sites
JPizzle 0 Posted September 2, 2013 xebuild update -f 16537 192.168.1.11 192.168.1.11 being your xbox IP Quote Share this post Link to post Share on other sites
stevergh 0 Posted September 2, 2013 Awesome super easy to use. Thanks Quote Share this post Link to post Share on other sites
Sergei 0 Posted September 2, 2013 xebuild update -f 16537 192.168.1.11192.168.1.11 being your xbox IP Actually it's xebuild update -f 16537 -ip 192.168.1.1 isn't it? However, I still can't update since xebuld is always unable to find console (even when providing ip manually). I have turned off firewall and all, and I can use FTP and samba server normally, so xbox is connectable. Quote Share this post Link to post Share on other sites
GamerX 3 Posted September 2, 2013 Do I have to edit the 1blkey.txt and replace the text to this DD88AD0C9ED669E7B56794FB68563EFA? By lan connection you mean I have to connect Xbox 360 to my laptop with wire.And my laptop to router? Quote Share this post Link to post Share on other sites
Vulpe 3 Posted September 2, 2013 Actually it's xebuild update -f 16537 -ip 192.168.1.1 isn't it? However, I still can't update since xebuld is always unable to find console (even when providing ip manually). I have turned off firewall and all, and I can use FTP and samba server normally, so xbox is connectable. i have some problem with connect... one idea to resolve problem. Quote Share this post Link to post Share on other sites