metalbruce 6 Posted September 2, 2013 Im not seeing the command prompt option while holding shift and right clicking in the xebuild folder. Could this be because im running xp? If so is there any way around it? Quote Share this post Link to post Share on other sites
JPizzle 0 Posted September 2, 2013 Im not seeing the command prompt option while holding shift and right clicking in the xebuild folder. Could this be because im running xp? If so is there any way around it?go to your start button, then run, type in CMD and press enternow navigate to your XeBuild folder, I would suggest moving it to C:XeBuild first so it is easy to navigate to. Actually it's xebuild update -f 16537 -ip 192.168.1.1isn't it?However, I still can't update since xebuld is always unable to find console (even when providing ip manually). I have turned off firewall and all, and I can use FTP and samba server normally, so xbox is connectable. yes it is, my mistake Quote Share this post Link to post Share on other sites
pawx 0 Posted September 2, 2013 I just connected my xbox to pc. Bridged connections of my computer wireless card and ethernet port. Did everything as said here and after the update it even automatically launched F3 with no need for reinstalling dash. Thank you very much. ps. How can I donate to donations? I have paypay. Quote Share this post Link to post Share on other sites
JPizzle 0 Posted September 2, 2013 I just connected my xbox to pc. Bridged connections of my computer wireless card and ethernet port. Did everything as said here and after the update it even automatically launched F3 with no need for reinstalling dash. Thank you very much. ps. How can I donate to donations? I have paypay. you mean PayPal ? donations@realmodscene.com Quote Share this post Link to post Share on other sites
sh4nka 23 Posted September 2, 2013 OMG what an amazing tool. Updated in seconds. Thanks. Quote Share this post Link to post Share on other sites
Aut0botKilla 4 Posted September 2, 2013 No problems updating my Falcon jtag n Slim RGH. Thanks Quote Share this post Link to post Share on other sites
Vulpe 3 Posted September 2, 2013 I have a problem with connection... my xbox and pc are connect to router and the problem is "udp wait timeout! failed to find xbox beacon" and i tried pc-xbox wired.. but still doesn't work... how can i resolve this problem? i tried direct to ip with "xebuild update -f 16537 -ip 192.168.10.191" but did not recognize xbox. Anyone with a idea for this? Quote Share this post Link to post Share on other sites
pawx 0 Posted September 2, 2013 Paypal yes. Managed Quote Share this post Link to post Share on other sites
JPizzle 0 Posted September 2, 2013 I have a problem with connection... my xbox and pc are connect to router and the problem is "udp wait timeout! failed to find xbox beacon" and i tried pc-xbox wired.. but still doesn't work... how can i resolve this problem? i tried direct to ip with "xebuild update -f 16537 -ip 192.168.10.191" but did not recognize xbox. Anyone with a idea for this? Xbox and computer MUST be on the same subnet Quote Share this post Link to post Share on other sites
Vulpe 3 Posted September 2, 2013 are in same subnet.. "255.255.255.0" but.. nothing Quote Share this post Link to post Share on other sites
JPizzle 0 Posted September 2, 2013 and console is in dashlaunch with updserv enabled ? Quote Share this post Link to post Share on other sites
Vulpe 3 Posted September 2, 2013 thanks JPizzle, now it works 1 Quote Share this post Link to post Share on other sites
Ginjasy 0 Posted September 2, 2013 Works Flawless, from laptop over wifi to RGH1 on cable lan. Quote Share this post Link to post Share on other sites
metalbruce 6 Posted September 2, 2013 thanks JPizzle, got it running through command prompts...however now i am receiving this message.any advice on how to proceed? update error.bmp Quote Share this post Link to post Share on other sites
JPizzle 0 Posted September 2, 2013 thanks JPizzle, got it running through command prompts...however now i am receiving this message.any advice on how to proceed? run the $systemupdate manually to install avatarkinect data Quote Share this post Link to post Share on other sites
metalbruce 6 Posted September 2, 2013 i have taken the $systemupdate folder from folder 16537, renamed it to $$ystemupdate and put it on a usb stick that has nothing else on it. Put it in the back of the console and booted it up but no update took place. Is this the correct procedure? Quote Share this post Link to post Share on other sites
JPizzle 0 Posted September 2, 2013 run a game with the usb attached, it should prompt you to update before the game runs. Quote Share this post Link to post Share on other sites
metalbruce 6 Posted September 2, 2013 it's still not updating. i tried several games. using default skin. and while in metro dash. does this have anything to do with dashlaunch? While in dashlaunch - at the top is says V3.06 (507) , at the bottom is says currently running 3.08 (523) Quote Share this post Link to post Share on other sites
sh4nka 23 Posted September 2, 2013 Try running the update without renaming it. I have had to do that on mine. Quote Share this post Link to post Share on other sites
metalbruce 6 Posted September 2, 2013 Thanks but it is still not catching the update Quote Share this post Link to post Share on other sites
Saiyaku 16 Posted September 2, 2013 don't forget that you're supposed to put the fat32 formatted stick containing the $systemupdate folder once the default metro dashboard is ALREADY fully loaded and on the main screen, not before. when you plug the stick and the system tries to display the message about "there's a change in storage" and such is when the prompt for update should appear Quote Share this post Link to post Share on other sites
metalbruce 6 Posted September 2, 2013 Thanks i did try your suggestion on putting the fat32 formatted usb stick containing $systemupdate and i also tried $$ystemupdate while in metro dash. I did see the message there was a change in storage, remounting drives but nothing about updating. 1 Quote Share this post Link to post Share on other sites
Vulpe 3 Posted September 2, 2013 try this... in your usb put only $$ystemupdate (or try $systemupdate) and nothing else... turn on console and then appear logo with xbox enter the usb. Quote Share this post Link to post Share on other sites
metalbruce 6 Posted September 2, 2013 Thanks, I gave it a try but unfortunately did not work. Perhaps worth mentioning is I can't boot directly to metro dash by holding in rb when starting up. I've always had to boot to fsd then go to system options. When prompted to leave I then hold in rb and can get to metro. Quote Share this post Link to post Share on other sites
metalbruce 6 Posted September 2, 2013 i'm currently running 16203 trying to get to 16537...so it is the $$ystemupdate from 16537 that i should be trying to apply - correct?? it's what ive been trying anyhow. also in the error posted above it says "loading avatar data...success!" the error from the command prompt is "unable to format systex partition" - sorry folks i'm a bit confused - any help will be appreciated Quote Share this post Link to post Share on other sites