Chris Riggs 0 Posted January 3, 2016 Here's a video on what keeps happening Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted January 3, 2016 connect a ethernet cable and connect to XeLL's web interface and download the log once it's finished booting, pastebin that and i'll try to help you figure out what the problem is, kinda hard to see anything on that video Your USB has to be FAT32 to work, and depending on your NAND you might not get updflash.bin flashing either... (if you have a MMC corona it's disabled and will thus never find anything) often times people also rename the file to "updflash.bin.bin" because windows hides known extensions... check that aswell... Quote Share this post Link to post Share on other sites
Chris Riggs 0 Posted January 4, 2016 connect a ethernet cable and connect to XeLL's web interface and download the log once it's finished booting, pastebin that and i'll try to help you figure out what the problem is, kinda hard to see anything on that video Your USB has to be FAT32 to work, and depending on your NAND you might not get updflash.bin flashing either... (if you have a MMC corona it's disabled and will thus never find anything) often times people also rename the file to "updflash.bin.bin" because windows hides known extensions... check that aswell... Ok, will you be here tomorrow? I assume so since you're an admin Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted January 4, 2016 Yes, swizzy, and I are almost always here, though, I will admit swizzy is a more active poster than I am. lol. I just got tired of people not using the search feature. lol. 1 Quote Share this post Link to post Share on other sites
Oktay Kalkavan 29 Posted January 5, 2016 search internet rawflash_v4.zip extract this to usb rename updflash.bin to nandflash.bin and place it to the root of the usb. and try flashing with the same method as you are trying. Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted January 5, 2016 search internet rawflash_v4.zip extract this to usb rename updflash.bin to nandflash.bin and place it to the root of the usb. and try flashing with the same method as you are trying. Won't make a difference if it cannot find the USB, or if it's a MMC corona Quote Share this post Link to post Share on other sites
ArpitGupta 0 Posted May 4, 2017 what to do if its an mmc corona? can it be fixed through hardware stuff? and how do I know if it is mmc? Quote Share this post Link to post Share on other sites
felida 1653 Posted May 4, 2017 5 hours ago, ArpitGupta said: what to do if its an mmc corona? can it be fixed through hardware stuff? and how do I know if it is mmc? Is your xbox booting normal? The video is offline.. if it is booting normal.. try using swizzy's simple nand flasher app.. will work with mmc corona.. either way.. app will let you know what type of console ypu have as well Quote Share this post Link to post Share on other sites
ArpitGupta 0 Posted May 5, 2017 5 hours ago, felida said: Is your xbox booting normal? The video is offline.. if it is booting normal.. try using swizzy's simple nand flasher app.. will work with mmc corona.. either way.. app will let you know what type of console ypu have as well No it does not boot normal. That is the problem. The installed nand is corrupt. Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted May 5, 2017 6 hours ago, ArpitGupta said: No it does not boot normal. That is the problem. The installed nand is corrupt. Carefully read what the message says at the end of booting XeLL, if it says it's skipping updflash.bin it's because it's a MMC corona (it'll tell you something like that aswell) If you have a 4GB console, or even if your dump is 48MB it's a MMC corona Quote Share this post Link to post Share on other sites
ArpitGupta 0 Posted May 5, 2017 It's 4gb and the nand is also 48mb but there is no message like skipping updflash.bin it just doesn't detect it . Quote Share this post Link to post Share on other sites
felida 1653 Posted May 5, 2017 13 hours ago, ArpitGupta said: It's 4gb and the nand is also 48mb but there is no message like skipping updflash.bin it just doesn't detect it . you will need a 4g r/w kit mate.. to fix the nand Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted May 5, 2017 13 hours ago, ArpitGupta said: It's 4gb and the nand is also 48mb but there is no message like skipping updflash.bin it just doesn't detect it . Actually, there is... you just fail to read it... the last line is where it should popup every couple of cycles Quote Share this post Link to post Share on other sites
saywaking 289 Posted May 5, 2017 12 hours ago, felida said: you will need a 4g r/w kit mate.. to fix the nand or someone ports Swizzy's Nand Flasher to libxenon or updates (rawflash on) xell, wich apparently means somone has also to update xell drivers to handling with MMC edit: nvm, didn't read properly, i guess Quote Share this post Link to post Share on other sites
Dr.Gonzo 392 Posted May 6, 2017 Porting to Xell isn't possible because Xell need a MMC Driver, for Hardware/writing access. Quote Share this post Link to post Share on other sites
ArpitGupta 0 Posted May 6, 2017 Where do I get that kit from? Quote Share this post Link to post Share on other sites
felida 1653 Posted May 6, 2017 23 minutes ago, ArpitGupta said: Where do I get that kit from? practically anywhere.. lol Quote Share this post Link to post Share on other sites
ArpitGupta 0 Posted May 6, 2017 Is it available online? Quote Share this post Link to post Share on other sites
felida 1653 Posted May 6, 2017 4 minutes ago, ArpitGupta said: Is it available online? did you try searching? lol.. you will not be spoon fed answers Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted May 6, 2017 20 hours ago, saywaking said: or someone ports Swizzy's Nand Flasher to libxenon or updates (rawflash on) xell, wich apparently means somone has also to update xell drivers to handling with MMC edit: nvm, didn't read properly, i guess Feel free to figure out how to communicate with the MMC controller to write to it, we can only read with XeLL at this time, and that only really works when you do NOT boot from the kernel, this is done using a virtual address that the bootloaders setup which the kernel kills when it boots The way i do read/write of the MMC with Simple 360 NAND Flasher is by opening a raw file handle and having the kernel do the under the hood communication... Quote Share this post Link to post Share on other sites
Datosi 0 Posted September 29, 2017 @Swizzy Mine says "MMC Console Detected, skipping sda0:\updflash.bin" It's corona4g. I read somewhere that if you use a Memory Card Reader and put rawflash in it, XeLL would flash the nand, is that true? please help me since my console doesn't boot to the dashboard after a stupid official update I did. Quote Share this post Link to post Share on other sites
Dr.Gonzo 392 Posted September 29, 2017 As previously written, Xell can`t flash MMC 360s. It makes no difference whether, you use it in combination with some other Hardware. 1 Quote Share this post Link to post Share on other sites