Eruil

it has bugs when you try to use jasper BB nands + rgh 3 (it creates xell with • Bad Block ID @ 0x1 [Offset: 0x4200])

try installing this too: https://github.com/abbodi1406/vcredist/releases

google search: dotNET Framework 4.5.2 (offline installer). install it . thats it

theres no tutorial about the side effects of being mising around with smc_editor and i doubt that anyone had written one before . you need to create one and try it by yourself . i helped once but as josh says "this is not a support thread " (if you have any issues that are not related with BUGS in Jrunner ) . you have 2 options : look for it in google or write it / test it yourself ;D . greetings

if you want simple nand flasher 1.5 beta i got it too.

yup. ive already downloaded it . updserv its still v2 . i replaced it with updserv v3 xex file

i made the steps i wrote to you . there was no problem (look at power mode and power vcs control data) : @Octal450 : the info about how to reset parental control its very usefull ;D

open that updflash with octals jrunner (its easier than flash tool 0.97) . you just need to use /nand/smc config editor option and press the edit config button. change 8280 to 8080 and then press save config button. it will create another updflash.bin with that edited smc_config to flash it to the console . thats it . @Octal450 the nanddump 17150.bin file that i uploaded was a corrupt nand (with badblocks) . to fix it i had to extract files and i tested with shitf + mouse left click and with the new "create donor nand option" . both worked fine . i checked the "clean smc " box to make it work . ;D . if you use that nanddump 17150.bin file and you select "retail" + "clean smc" and then you use the "create xebuild image" option it will create a new updflash.bin with the same badblocks . • Bad Block ID @ 0xE6 [Offset: 0x3B4C00] • Bad Block ID @ 0xFE [Offset: 0x417C00] • Bad Block ID @ 0xE6 Found @ 0x3FF[Offset: 0x107BE00] • Bad Block ID @ 0xFE Found @ 0x3FE[Offset: 0x1077C00] i thought that jrunner remapp badblocks automatically but its better if you create a new clean nand.bin. greeetings from mexico ;D

dude , you never sent the cpukey . we need updflash.bin (or any nand dump) + cpu key . cpukey its MANDATORY to create another nand to octal. no prob dude . i think that you only need to ad in shortcuts the info about shift + left click to make new nands. i tested it without any problem ;D

i used the nanndump 17150 with badblocks and i tried to create another with 17559 dash in your jrunner version . the result was an updated nand with same bad blocks . i extracted files (kv.bin, fcrt.bin, etc...) and i compiled a new retail one with jrunner 0.8 benmitnick using the "create a new nand without nandump" . then i finally used that retail with no bad blocks to create a rgh 3 17559 nand . then i tried what you said about shift + left click in the donor nand option copying extracted files (kv.bin , fcrt.bin, etc) to /xebuild/data and selecting "retail" with "clean smc" options. it worked . i thought that you had removed the "create an image without the nanddump" completely . im glad that its not what i thought ;D

no prob . i made it to another coleague in EOL forum ;D . i recompiled a bad block glitch nand to a retail with no bad blocks https://mega.nz/file/BU1GxLbI#VrYSaxaZ6ns1dSRE4_OxqWSvnBoILd1lMBRwXGooa6I i tested in your jrunner version. i selected clean smc and i pressed the left click + shift in the "create donor nand option " . it worked . thanks mr davidson ;D

Hello Josh and happy 2022 thank you for your awesome work . i hope that this bug report may be of interest to you . i tried to create a new retail nand without bad blocks using a glitch nand with bad blocks with the "create an image without nandump.bin " using the extracted nand files but i see that you removed it in 3.1.0.b . i created one using your software but retail nand keeps the bad blocks . i used another jrunner to complete the task. hope it helps in any way

do you think that it can work on a stuborn corona with samsung nand + samsung rams? . i tried to do a RGH installation in my cousins console but it only shown xell screen 1 time and when i created xebuild nand it hanged up at the 3rd try to boot (i tried with ace and Sonic 360 with muffin timmings) . sonic 360 has a 100 mhz oscilator ( its a spanish chip)

oh , i see. its for matrix or any programable x2c64 based glitchip to work as a CR4 (muffin improvement). cool ;D

yup. a screen capture should help . i made a new updflash for my console with your smc+ patch. runs very well , i thank you for that , jrunner works fine is there any smc + 1.1 improvement in slim consoles with ace chips?

do you have any capture of your xell version? does it work with mupen beta 2 and 1175 / hitachi drives ?

hi dude . long time no see. i am sharing in EOL your new 0.6 .. greetings

your new skin based looks great . i love Kodi😊

thanks dude. i made a nice halo 4 loading screen with a "progress bar visual" . now its time for resize and move the "progress bar"

thanks dude . can i see you in elotrolado?

this is an example of what i want to do. is there any dumb proof xui tool guide ? lol

well, how can i make that visual?

i am trying very hard to replace the aurora 0.7b classic loading text with a nice looking progress bar. how can i make it? i did it before on 0.6b but with the new 0.7 xuielements things are a little bit different. i hope that anybody could help me . thanks guys

thanks dude i found AuroraElements (XUI Extensions).rar for 0.7b in http://phoenix.xboxunity.net/#/news ( i think its the same that you wrote about before) ). worked like a charm . love ya ;D

XuiToolXamExtensions.rar right?, ive already done it mate