Marius Platzner 6 Posted February 15, 2015 thanks for prompt support . Quote Share this post Link to post Share on other sites
Dr.Gonzo 392 Posted February 15, 2015 You can use also XeBuild GUI. It uses the same routines (NandPro Operations) for bad block matching like other solutions. Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted February 15, 2015 WARNING: DO NOT remap a image that has been built with default settings in xeBuild GUI or JRunner... they automatically remap for you... Quote Share this post Link to post Share on other sites
Dr.Gonzo 392 Posted February 15, 2015 Was not it so, that JRunner and others only remap bad blocks automaticly in the first 50 region ? Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted February 15, 2015 Was not it so, that JRunner and others only remap bad blocks automaticly in the first 50 region ? Well, maybe JRunner itself only does that, but xeBuild remap automatically with the default settings (if you don't tell it NOT to remap it will) 1 Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 16, 2015 hello again , i did remap at the only one bad block i have with jrunner to updflash.bin but how i flash again to resolve this boot problems ? ( Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted February 16, 2015 hello again , i did remap at the only one bad block i have with jrunner to updflash.bin but how i flash again to resolve this boot problems ? ( Simple 360 NAND Flasher can both read and write your nand, if you use 1.4b it'll attempt to recover bad blocks for you, however... as i said above^ you should NOT remap a file made by JRunner Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 16, 2015 i used v1.2 and he wrote without recover , since morning im trying to boot up and no work... Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted February 16, 2015 If you can't boot it up, you need to go to a modder/modstore and have it repaired, basically... go to whoever hacked your console in the first place and ask for help, it involves soldering unless they left QSB's or a quick connector to the NAND... Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 16, 2015 once again thanks Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted February 16, 2015 where u located, i am sure someone around you can get it sorted. Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 17, 2015 Romania, i sent today the console to fix it will post here once i got it back with the results , i hope will work again because i dont have any red rings it just doesn't boot thanks anyway for your opinions . Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 21, 2015 today my xbox came from service, is working and i have now freestyle f3 with last dashboard , is new to me but i will handle it . 1 Quote Share this post Link to post Share on other sites