Marius Platzner 6 Posted February 15, 2015 hi there, i need help with my xbox rgh , after i updated dashboard 17150 and restarted with new dashboard it worked but when i power off and tried later to power on doesn't boot either xell-reloaded or normal , the red light and green comes on and also the green dot on but still doesn't circle for booting up (( 5 Quote Share this post Link to post Share on other sites
Swizzy 2085 Posted February 15, 2015 What model of console do you have? Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 15, 2015 xbox 360 slim Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted February 15, 2015 xbox 360 slim When he was asking for a model, I dont think he meant slim. Is it trinity, carona v1/v2/v3/v4/v5/v6, or a winchester? These are the possible models for Xbox 360 slim, so I am sure you can see how your answer was not helpful at all. Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 15, 2015 well ... i'm sorry .. when i saved the current dashboard and load in xebuild showed up corona rgh 2 i have the logs Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted February 15, 2015 How big is the image? Just trying to figure out if it is a 4gb console. Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 15, 2015 it has internal hdd 250gb Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted February 15, 2015 I only ask, because the 4gb nands have a problem where they just stop working. At this point it doesnt sound like a nand issue, but to be sure, any chance you have the retail nand? if so, try removing power from the glitch chip, and writing that back to make sure the console itself isnt broken. Also at this point pictures of the install would be helpful Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 15, 2015 i have the retail nand and the install log when i flashed but this part of removing power from glitch chip and how i write back the retail nand ? Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted February 15, 2015 If it doesnt boot, the only way to flash is with a hardware flasher. and removing power is as simple as desoldering 3v3, or 5v from the chip, depending on what chip you are using. Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 15, 2015 hm i just took of the internal hdd and it boot in xell , how i proceed in this case ? Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted February 15, 2015 That is interesting, does it boot the dashboard also? Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 15, 2015 yes amazing , i put hdd back and magically boot in dashboard . thanks for support , :thumbup: :thumbup: Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted February 15, 2015 glad you got it working. Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 15, 2015 hm this is fantastic , after it boot up in to dashboard i formated internal hdd and power off then again doesn't boot up either with hdd removed or plugged , this in insane... Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted February 15, 2015 sounds like a faulty install to me, or a clone cool runner. Can we get some pictures? Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 15, 2015 now worked again, before i update i had 16202 and never did this before , after update on 17150 like got insane , what pictures are you refering ? Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted February 15, 2015 Pictures of the install, coolrunner, etc. You could also try building a glitch2m image, which might help. Quote Share this post Link to post Share on other sites
Swizzy 2085 Posted February 15, 2015 What did you use to flash your console? i'd recommend writing it once again using Simple 360 NAND Flasher 1.4b, it sounds to me like a possible write error or a possible badblock in the making Basically, when the console alternate between green and red it's because of a MFG error, bad Keyvault or a E5x error However, as it's a slim it could be soooo many more errors as the ring itself don't alternate, it's just the middle dot... unless of course someone modified your ROL to behave that way... Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 15, 2015 xeBuild GUI Build Log: ==================================  Swizzy's xeBuild GUI version 2.095  Log Started: Sunday 2/15/2015 12:51:40 AM ==================================  *** Some console information *** CB Version: 13121 Serial number: 264206123943 Console region: PAL/Europe (0x02FE) DVDKey: Console ID: 0972F58108 MFR-Date: 28-09-12 OSIG String: PLDS   DG-16D5S       1532 FCRT.bin Required: False Using xell-reloaded for Glitch hack Including dashlaunch... Done! Including custom dashlaunch settings (launch.ini)... Done! Copying nand to data directory, this may take a while... Done! Checking if SMC is Glitch or Retail... Dumping current SMC... Done! Checking SMC... SMC is Glitch patched! it will be used the way it is... Disabling FCRT.bin check... Parameters sent to xeBuild: -noenter -t glitch2 -c corona -d data -f 17150 -b DD88AD0C9ED669E7B56794FB68563EFA -p *key* -a nofcrt output.bin Building nand using xeBuild (this may take a while): ---------------------------------------------------------------     xeBuild v1.14.693 --------------------------------------------------------------- base path changed to C:\Users\Neamtu\Downloads\xeBuild_GUI_2.095\files ---- { Image Build Mode } ---- building glitch2 image --------------------------------------------------------------- output.bin image built, info: --------------------------------------------------------------- Kernel   : 2.0.17150.0 Console  : Corona NAND size : 16MiB Build    : Glitch (v2) Xell     : power on console with console eject button Serial   : ConsoleId : MoboSerial: Mfg Date : 09/28/2012 CPU Key  : 1BL Key  : DD88AD0C9ED669E7B56794FB68563EFA DVD Key  : CF LDV   : 2 KV type  : type2 (hashed - unchecked, master key not available) ---------------------------------------------------------------    xeBuild Finished. Have a nice day. --------------------------------------------------------------- Moving output to your destination directory... Done! Cleaning data and temporary directories... Done!       ****** The app has now finished! ****** Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 15, 2015 SFCX: Bad block found at 000001DFblock 0x1df seems bad, status 0x00000250 Â i saw this when was backup and flashing , so that could be the problem ? Quote Share this post Link to post Share on other sites
Dr.Gonzo 392 Posted February 15, 2015 This is quite likely the reason for your problem. You must move the bad block with the well known tools. Quote Share this post Link to post Share on other sites
Marius Platzner 6 Posted February 15, 2015 how i do that and what is the meaning moving the bad block ? Quote Share this post Link to post Share on other sites
Dr.Gonzo 392 Posted February 15, 2015 You have a corrupted Storage Cell in your Nand. A Bad Block mover marked this corrupted Cell as corrupted, so that in the future, no Data will stored in these Cell again. It is used another instead. There are sundry programms, that matching Bad Blocks automatically (if its possible). BadBlockbuster_RC1.rar Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted February 15, 2015 j-runner automatically remaps bad blocks. you might have to dump the nand with a hardware flasher for that to find them though.(could be wrong about that.) Quote Share this post Link to post Share on other sites