remete89 2 Posted July 15, 2014 HI guys, not quite sure if this is the place to seek answers for my problem, but here i come: Me and my buddies started to play through Link only a few months ago, and now, as JQE stopped, I am unable to link my console through Aurora - earlier I had it done in FSD, now, It fails to find the open ports, Though nothing has changed in my router options. I was unable to find any solution, so I just had to ask: What am I doing wrong? Or Aurora is just not in the mood yet to let me play? Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted July 15, 2014 HI guys, not quite sure if this is the place to seek answers for my problem, but here i come: Me and my buddies started to play through Link only a few months ago, and now, as JQE stopped, I am unable to link my console through Aurora - earlier I had it done in FSD, now, It fails to find the open ports, Though nothing has changed in my router options. I was unable to find any solution, so I just had to ask: What am I doing wrong? Or Aurora is just not in the mood yet to let me play? The ports should be working fine, most likely what changes is your console's IP adress, did you have it set to static and/or did you reserve the DHCP in your router? if not; that's where your problem is most likely at... Quote Share this post Link to post Share on other sites
remete89 2 Posted July 15, 2014 Nope, net's passing throug notebook's internet sharing, previously it had no problem getting used to different ips...DMZ Host I used, I'l dive into the router though as soon as I'll have the time for it. Thanks though, good point there Quote Share this post Link to post Share on other sites
Oktay Kalkavan 29 Posted July 15, 2014 I solved same problem on mine, just by deleting the launch.ini - Xbox used default values and Aurora worked perfectly. I then reconfigured the launch.ini and no problem occured. I hope this solves your problem too. Quote Share this post Link to post Share on other sites
remete89 2 Posted July 16, 2014 Thank! It worked  I solved same problem on mine, just by deleting the launch.ini - Xbox used default values and Aurora worked perfectly. I then reconfigured the launch.ini and no problem occured. I hope this solves your problem too. 1 Quote Share this post Link to post Share on other sites
remete89 2 Posted July 17, 2014 OK, so now I'm quite in deep sh.t now...I have no ideo how, but suddenly my xbox won't boot into neither fsd or Aurora, only into xbox dashboard...Any solutions guys? Asap I mean.. :/ Quote Share this post Link to post Share on other sites
jayjay2012 2 Posted July 17, 2014 OK, so now I'm quite in deep sh.t now...I have no ideo how, but suddenly my xbox won't boot into neither fsd or Aurora, only into xbox dashboard...Any solutions guys? Asap I mean.. :/ DO you have xex menu on your xbox? if so go into that and launch dashlaunch and resave launch ini, you may not have saved your launch ini which is why it launched into ms dash. Quote Share this post Link to post Share on other sites
remete89 2 Posted July 17, 2014 That would be the problem, So now i'm trying to install xex menu - the guys who i bought my rgh from missed that one - it wasn't needed they thought :S Thanks by the way, will post here if succeed Quote Share this post Link to post Share on other sites
remete89 2 Posted July 17, 2014 That WAS the problem...I Always found dashlaunch a little bit hard to use correctly...Thanks for the advice though, I nearly fell into a great depression for not being able to play a bit b4 my shift starts Quote Share this post Link to post Share on other sites
jayjay2012 2 Posted July 17, 2014 glad to be able to help you  happy gaming!!! Quote Share this post Link to post Share on other sites
remete89 2 Posted July 19, 2014 Back to the beginning...All verification steps succeed, exept for the broadcast and data port. I tried everything which came to my mind - static ip, wired/wireless connection, changed several router settings, nothing My question is: could it be a problem, that my data and broadcast port are the ones that were in the tutorials? 3072-3071 By the way, it there really no way to add a plugin/feature that does these things automatically? For the noobs' sake as me Quote Share this post Link to post Share on other sites
datastream 101 Posted July 19, 2014 Back to the beginning...All verification steps succeed, exept for the broadcast and data port. I tried everything which came to my mind - static ip, wired/wireless connection, changed several router settings, nothing My question is: could it be a problem, that my data and broadcast port are the ones that were in the tutorials? 3072-3071 By the way, it there really no way to add a plugin/feature that does these things automatically? For the noobs' sake as me  If you've gave your xbox a static IP address, you could add it to your DMZ zone in your router, if your not familiar with opening ports etc. on your router then adding the IP address of the machine to the DMZ zone will open it all up.... Quote Share this post Link to post Share on other sites
jayjay2012 2 Posted July 20, 2014 Back to the beginning...All verification steps succeed, exept for the broadcast and data port. I tried everything which came to my mind - static ip, wired/wireless connection, changed several router settings, nothing My question is: could it be a problem, that my data and broadcast port are the ones that were in the tutorials? 3072-3071 By the way, it there really no way to add a plugin/feature that does these things automatically? For the noobs' sake as me Try 1981-1984 for your ports, also have you ticked "UPNP" in the "PLUGIN" screen in the settings screen? alos recheck your dashlaunch settings especially network let me know how you go 1 Quote Share this post Link to post Share on other sites
remete89 2 Posted July 20, 2014 OK, so sorry for the troubles, actually, the only thing I did not care about was: Aurora is yet to be a "final", therefore some glitches may appear...one of these were that, even if System link worked properly, the testing appeared to fail. So I was able to play system link the whole time, and after the first connect&play through Aurora - no lag, no nothing, superfast supercool experience by the way - It suddenly ran through the tests like a charm... A huge thumbs up for you guys, you really care about others. I had no similar experience for a while now      You're  s 1 Quote Share this post Link to post Share on other sites
Kwabyna 1 Posted July 24, 2014 hi i need help fast. i got my service provider to enable ports for me. but upnp is still not working. i am able to see and join rooms but i cant see host for me to join to play the games. Is this got to do with upnp or do i have to enable a port on the upnp. Please i need help fast before my service provider bails out on me. Quote Share this post Link to post Share on other sites
Kwabyna 1 Posted July 24, 2014 This is the issue am facing..... I can join rooms but I can't see host for me to join and play... Sent from my GT-I9500 using Tapatalk Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted July 24, 2014 This is the issue am facing..... IMG-20140724-WA0015.jpeg I can join rooms but I can't see host for me to join and play... Sent from my GT-I9500 using Tapatalk You are probably not on the same title update as everyone else... make sure you are using the latest one... The upnp not found is ok when you have the ports open... Quote Share this post Link to post Share on other sites
Kwabyna 1 Posted July 25, 2014 My title updates is fine. TU 18. But no host. By the way my data port and broadcast port are all 3078. Is this the reason why. Sent from my GT-I9500 using Tapatalk Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted July 25, 2014 My title updates is fine. TU 18. But no host. By the way my data port and broadcast port are all 3078. Is this the reason why. Sent from my GT-I9500 using Tapatalk Probably, you need to be using 2 ports, not 1... Quote Share this post Link to post Share on other sites
Kwabyna 1 Posted July 25, 2014 OK thanks man....will try it today and give feedback. Thanks for the help man. Sent from my GT-I9500 using Tapatalk Quote Share this post Link to post Share on other sites
Kwabyna 1 Posted July 25, 2014 OK this is the scenarion. Am using a repeater, NanoStation 2 to get my internet conbection from my service provider. He has enable 192.168.1.100 for my Xbox and opened port 3078 for me. Everything passes except the upnp but am using one port which is 3078. So I don't know if that is the reason for me not join host rooms for me to play LiNK. @Swizzy. Sent from my GT-I9500 using Tapatalk Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted July 25, 2014 OK this is the scenarion. Am using a repeater, NanoStation 2 to get my internet conbection from my service provider. He has enable 192.168.1.100 for my Xbox and opened port 3078 for me. Everything passes except the upnp but am using one port which is 3078. So I don't know if that is the reason for me not join host rooms for me to play LiNK. @Swizzy. Sent from my GT-I9500 using Tapatalk Call them again, and ask them to open port 3079 also to your xbox... The UPNP thing is only so that your console can tell your router to open the ports... without the configuration beeing pre-defined... Quote Share this post Link to post Share on other sites
Kwabyna 1 Posted July 25, 2014 Call them again, and ask them to open port 3079 also to your xbox... The UPNP thing is only so that your console can tell your router to open the ports... without the configuration beeing pre-defined... I just passed on all ports 3079 and 3078 but I still can't see host. Will DMZ help.??Sent from my GT-I9500 using Tapatalk Quote Share this post Link to post Share on other sites
Kwabyna 1 Posted July 27, 2014 OK now I can see host rooms but when I hit join it says unable to join game session. Sent from my GT-I9500 using Tapatalk Quote Share this post Link to post Share on other sites
Kwabyna 1 Posted July 29, 2014 I also found out today that there is a new dashBoard for Xbox from 16747 to 16756. I am still on the 16747 dashboard. Is that the reason for me getting the error "unable to join game session" Sent from my GT-I9500 using Tapatalk Quote Share this post Link to post Share on other sites