Nachtgarm

What do you mean by "all"?

Thx for the fast reply! I already had the settings in NXE on automatic before (forgot to mention that). I had high hopes, that this won't be the case: " [...] but if your connection type is behind a ISP level NAT, you can't use LiNK because your ISP have a router infront of your router which doesn't have the ports open [...], but as it looks like I have to call my ISP and ask for that... I'll keep you posted! At least it is not my fault, due to obvious erroneous settings Cheers

Hi everyone, I've seen a few similar threads, but none of them described my problem, or solved it. Therefore I open a new topic: Problem: I can't get a "pass" on TCP/UDP. ------------------------------------------------------------------------------------------------------------- Description: I would like to play online with my RGH Xbox via System Link, but can't get a "pass" on the port tests. I am able to connect to "rooms" via System Link, but no games are found. ------------------------------------------------------------------------------------------------------------- Games tested: Diablo 3 UEE (RF, latest TU), CoD Modern Warfare 2 ------------------------------------------------------------------------------------------------------------- Setup: - XBOX 360, Jasper, Glitch2, FSD 3 Rev 775, Dashlaunch 3.10, Kernel 2.0.16537.0, Skin: The Dream Theme 2.5 - Router: Fritz Box 7630 - ISP: Willy.Tel (FTTB) ------------------------------------------------------------------------------------------------------------- Network Settings in NXE: - Manual Settings - Static IP: 192.168.178.66 (DHCP reserved IP for XBOX on MAC) - Subnet Mask: 255.255.255.0 - Default Gateway: 192.168.178.1 (IP of my Router) - Primary DNS: 192.168.178.1 - Secondary DNS: 192.68.178.1 ------------------------------------------------------------------------------------------------------------- Dashlaunch Settings: ------------------------------------------------------------------------------------------------------------- LiNK Settings (FSD): Enable LiNK ✔ Enable UPnP ✔ Data Port: 3072 Broadcast Port: 3071 Status: FSD Plugin is Loaded || ConnectX Plugin is not Loaded... ------------------------------------------------------------------------------------------------------------- Router Settings: UPnP enabled ✔ List of UPnP enabled Ports: Protocol Port Host IP-Address to Port TCP 3072 RGHXBOX 192.168.178.66 3072 TCP 3072 RGHXBOX 192.168.178.66 3072 UDP 3071 RGHXBOX 192.168.178.66 3071 UDP 3071 RGHXBOX 192.168.178.66 3071 Port Forwarding: Exposed Host for RGHXBOX (192.168.178.66) Additional Router Info: There is no DMZ Option available There is no NAT Settings Option available (see above: Exposed Host) ------------------------------------------------------------------------------------------------------------- Result of Test in FSD: UPnP Status: UPnP enabled Router Found Data Port Status: Port: 3072 TCP: Fail UDP: Fail Broadcast Port Status: Port 3071 TCP: Fail UDP: Fail JQE360 Authentication Status: Auth [username]: Pass DevLink Disabled: Pass: DevLink is disabled Ping Patch Enabled: Pass: Ping Patch enabled ------------------------------------------------------------------------------------------------------------- Additional Info: I have already tried setting the Router to non DHCP which had the same result. Changing the ports in the Router and in FSD had the same result. ------------------------------------------------------------------------------------------------------------- That should be it... I hope I haven't forgotten anything and hopefully someone can help me with this issue. Thx in advance and Cheers Nachtgarm