Problems using LINK on 3rd rgh console

[Brett French 1]

Hi there, I'm not new to the scene and having been using link for years. I currently have 3 rgh 2 consoles and one of which won't connect to link no matter what I do. I have 2 jaspers which both work fine, different ports forwarded for each IP. I have reserved seperate ip addresses for each console.

I have just bought a trinity slim and rghd it. It connected to xbox live before hand so no issues with wireless board. It connects to unity for title updates and covers but I cannot get the ports to verify.

I have even tried putting the IP in the dmz but still no dice.

Here are some pics of my settings, any help would be appreciated.

If I have forgotten to mention anything please say, I have tried various port combinations from 1000/1001 up to current ports of 3073/3074

I have xhttp enabled in dashlaunch and liveblock but not livestrong. Not sure if I am missing something.

[superted76 64]

It all seems fine and the only suggestion I'd make although maybe of no relevant use would be 192.168.0.8 - 192.168.0.10 - 192.168.0.12 as opposed to he last one being .14 also try resetting the network settings in the stubborn one's NXE settings and see if that may help

[Brett French 1]

It's the 0.8 one that is giving me the issues. And yep I have tried that already. Completely reset network. I have set the IP to automatic and put in gateway and bits manually. I have even tried manually reserving a different ip address for my xbox mac but no dice. I am stumped.

It all seems fine and the only suggestion I'd make although maybe of no relevant use would be 192.168.0.8 - 192.168.0.10 - 192.168.0.12 as opposed to he last one being .14 also try resetting the network settings in the stubborn one's NXE settings and see if that may help

[superted76 64]

Strange, my entire house is network hard wire and wireless from one router with 3x 360's and a ps3 and all work DHCP and automatic assignment same ISP as you. Have you tried with two digits at the end i.e 08 as opposed to just 8?

[Brett French 1]

It is a strange one. Only thing left is whether it could be using IPv6 when it needs IPv4 which I'll need to ring isp for I think.

[Swizzy 2084]

It is a strange one. Only thing left is whether it could be using IPv6 when it needs IPv4 which I'll need to ring isp for I think.

That's not it, the 360 don't support IPv6 at all

[Brett French 1]

That's not it, the 360 don't support IPv6 at all

Ok well any ideas as I'm stumped

[superted76 64]

only idea left would be to clear all router settings and all 3 360 settings and start from scratch one at a time if your reserving IP or try letting DHCP assign all three from scratch, other than that I'd contact ISP and see if they can assist 

[gavin_darkglider 1562]

i would try different ports. I have found that some routers have issues forwarding certain ports. Just a thought.

[Brett French 1]

Ok so just to add resolution to this topic, I factory reset my router and re added each console. I have had one set of failed ports but as of now I have all 3 consoles working on link. Ports 3069/3070 3071/3072 and 3080/3081. 3073 kept failing and 3074 would pass so jumped higher a few ports and worked right away.

[superted76 64]

Fantastic and hats off too gavin_darkglider for sussing that out I'd never have guessed shifting ports but learn something new every day