Rodrigo Santos Rodrigues 0 Posted April 6, 2014 Hey guys, how are you doing? I have a RGH Xbox here that was running flawlessly a couple of years until now. I haven't had the time to play it this week, so I didn't turn it on. It was plugged on both TV and PSU, tho. Now it simply won't boot up! The lights are green, the fan runs louder (i have set it to max) but I get black screen. Tried running Xell Reloaded (eject button) and it works, opens the Xell diag. But whenever I turn it on with the power button or the controller, it won't work. What can I do to make it boot again? thanks in advance Quote Share this post Link to post Share on other sites
Shuraim Ahmet 29 Posted April 6, 2014 I had a similar problem but then found out my display cable which is connected to tv was faulty.... i fixed it now everything is fine. Also try power cycle. Hope this helps. Quote Share this post Link to post Share on other sites
Swizzy 2085 Posted April 6, 2014 Hey guys, how are you doing? I have a RGH Xbox here that was running flawlessly a couple of years until now. I haven't had the time to play it this week, so I didn't turn it on. It was plugged on both TV and PSU, tho. Now it simply won't boot up! The lights are green, the fan runs louder (i have set it to max) but I get black screen. Tried running Xell Reloaded (eject button) and it works, opens the Xell diag. But whenever I turn it on with the power button or the controller, it won't work. What can I do to make it boot again? thanks in advance You'll probably need to reflash your nand, dump it using xell-reloaded and build a new one, if you have a MMC corona you'll have to use a hardware flasher, otherwise you can use the built-in flasher by placing your new nand named "updflash.bin" in the root of a FAT32 formatted usb memory and starting XeLL-Reloaded Quote Share this post Link to post Share on other sites