Jump to content


  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by konsolenumbau

  1. Hey there. Long Time not been here. First of all thanks to the Dev's for this New Version. 👍 Now i have three Guys with exactly the same Problem. I'll Get into this in an hour an have a look of this occures on my Box as well. I'll Post the log then. ************************************ ************************************ UPDATE: So I installed 0.7b on my Machine and did a total new Setup. What so ever there is no Error showing up?! My Customers said that the Error appeared after they Pressed the "Scan for Title Updates" Button. Then reboot, then it hangs in the Aurora Startup screen with a Message "Scanning for TU Updates". I guess they send there Box back in so i can try to get a log from there Box as soon as they arrive. I´ll be staying on this Prob and keep you up to date.
  2. I will ;-) Gesendet von meinem SM-N9005 mit Tapatalk
  3. Hey Dr. Gonzo. Well I could have come over to xboxhacks.de as well to ask that ;-) Let's see what swizz has to say. Got an squirt programmer here as well. Also matrix... Honestly... Never tried them on the gui as I really always use my Nandx... We'll see. And... Danke Dir schonmal :-) Gesendet von meinem SM-N9005 mit Tapatalk
  4. Hey up Guys. Feeling a bit.... Dumb.... 😂 I was allways using JRunner but really like to use xebuild gui more often... Just to... Use it as it comes a lot more pro I guess... But.... I can't get that thing to recognize my Nandx... Not even see a option where I could configure something... Am I that blind? Of cause using the newest version... Searched the WHOLE WEB (😂😂) but did find nothing... But there are Buttons to read and Wright.... Any hint from somebody? Thanks Seb Gesendet von meinem SM-N9005 mit Tapatalk
  5. I added @ least one more hack ;-) I'll have a go with them wires in the morning. You'll all know what's happening. Greetz Gesendet von meinem SM-N9005 mit Tapatalk
  6. 😯😂😂😂😂 there you go 😂 Gesendet von meinem SM-N9005 mit Tapatalk
  7. Thanks. Thats more interesting for you in a while i guess ;-) Forget to mension about your thing ... Of cause it could be a RGH1 Box as well if it is a Phat and the Box layed around long enough ;-) Remember to check the current installed Dash before you do anything ;-) The Chips you got will work without stress on RGH1. RGH1 is a joke when you are used to PS3´s ;-) Or you use the Clip on the PS3? ;-) I always solder the linker... ;-) ============================================== Have a look here: http://www.realmodscene.com/index.php?/topic/4959-every-thing-you-need-to-know-about-your-rghjtag/ Just load the J-Runner and install. The only Program you need with all the needed Pics inside.. Pretty easy. Of cause some Great Other Developers have build us some great Tools too. ;-) Couldn´t find any good Tut´s in one Place now. It´s like it´s ever been... you pick your pieces from here and there. You can Contact me if you run into trouble i´ll help you out ;-) Like i said modding a XB is pretty easy then doing an PS3. Or this is maybe just felt by me
  8. So... JR-Programmer to read/wright Nand I still use my NandX to program the chip i really don´t know if the JR-Programmer is capable but it guess so. As you are talking about Phats. There is just to ways.. RGH2 or RGH1.2 RGH2 on Phats was always a hell of try and Error... i tryed this a few times but most of the Boxes were a pain.... So i got that "Squirt Reloaded" (the one we are talking about right now) wich are totaly SUPERB für RGH2 on Phats. ;-) RGH1.2 should work with all the mentioned chips from yours but... never tryed it till now as the Killer for RGH2 is this Squirt without hustle. But the "usual" Chips are much cheaper your REV.D and the ACE360 should work just fine. ;-) =================== Back to topic... It´s totaly strange sometimes it boots proper sometimes don´t even without messing with the cables. Like the Chip is not proper shut down after Glitching/Booting sometimes... It happens then it don´t than again even without even looking @ the Wires. ??!!! Could that be something in the timing file of Squirt? @Swizzy ???
  9. I´ll check that. (Got another PS3 laying here waiting ;-) ) But.. I really don´t touch the wires . As i said when i put the Rev.D back in everythings working great... Strange... I know what you think, why not leave the Rev.D in there... It has to work somehow i mean it boots up just awsome with that thing but the view is a bit .. strange.... I´ll do everything i can make money with ;-) I´m doing this for about seven years now official and longer before. I got a lot of stuff laying around. What are you looking for?
  10. ahhh wasn´t that easy. Worked exactly one time without the Blur... Than again... But.. Just with that Squirt. . . No probs with the Rev.D... I´ll have a deeper look ..
  11. @ Superted76: Just wired a thicker Ground Cable to the Body of the AV-Housing. That was it! ;-) Before that the G-Wire was soldered just to the Ground Port on the Board that would cause the Issue. Now everythings fine. Sadly i read your post after finding out ;-) Thanks anyway this is solved then ;-)
  12. Hey up there people ;-) Well i got here my own Corona V1 . Everythings fine with it. But.... Since a few minutes ago she was fitted with a CR Rev.D worked like a charme but Boottimes could have been better. So i found that nice "Reloaded" laying around here. They do perfect Bootimes always so i deceided to give it a go. Just soldered the Rev.D out, Programmed the Reloaded and soldered it in. Bootet instant but... the Video output is "Blurry" now with this chip. I got shocked cause i thought now ROD is coming but after i changed the chips again everything was fine. So the Video Interference is ONLY with the Squirt Reloaded 100MHZ. Something must interfere with any component. Is there anyone out there had this before or has a clue? If needed Pictures are no Problem;-) Thanks and Greetz Guys Seb.
  13. Of cause. There might be additional files that need to be copied internal but..... Yes they'll all work from usb. Gesendet von meinem SM-N9005 mit Tapatalk
  14. Like its been wrighten from swizzy... Check the tutorial 😉 Gesendet von meinem SM-N9005 mit Tapatalk
  15. You need jtag/rgh.... Gesendet von meinem SM-N9005 mit Tapatalk
  16. Sorry... Thought he wanted to know how he can copy the launch.ini to the computer. As i said "or use dashlaunch to make the changes and SAVE the new settings." Gesendet von meinem SM-N9005 mit Tapatalk
  17. Just get a FTP-Program like Filezilla and start FSD or Aurora or what ever... Then Connect via IP. Use the proper User: / Pass: for the specific Launcher... Or.... just plug a stick in the Box and copy the launch.ini manual to the stick. then... put the Stick in your computer ;-)
  18. You can't open the launch.ini straight away except on the computer... Just 2 ways... Copy the launch.ini to the computer and edit it on there or use dashlaunch to make the changes and SAVE the new settings. Gesendet von meinem SM-N9005 mit Tapatalk
  19. Gettin my thousand Profiles together... :-(

  • Create New...