tx3

Whats the changlog?

Check the file name...if its somethng like bla%/.xex make it something like bla.xex

Put it on a stick?...and play it from there

Does this mean a big difference for me ? any settings i need to do in dashlaunch? i moved the plugin.xex to an different folder for now ...

What about games with more than one disc?...can i still play them ...discswap plugin?

I tried to unload it already ..but no setting stays saved..after reboot old settings being loaded ..i know that dashlaunch is something different ....i tried everything u know . i dont use Link ...should i go back to an older Version of freestyle?

Anything would really be helpful

Nobody?

hi i am using an emulator which uses the default combo START+SELECT as FSD rev 775 ...i tried to untick it in settings -->Plugin ..but after every reboot it´s always back to START+SELECT ..i also tried to change the combo to other Buttons but always with the same result ...reboot and it´s back to START+SELECT ...i tried to save in Dashlaunch.ini ...but that did not help to..the settings always reset themself ...any idea what´s the problem i am on dashlaunch 3.09...Kernel 16537

Nobody

hey ...i now managed to give my xbox an static IP the only thing that still dont work is to open up the ports my setup is still router>laptop>lan>xbox what i did was Virtual Services and i add 1000 TCP 1000 UCP 1001 TCP 1001 UCP what can i do more

I need a static IP adress for that right? my setup right now is something like this router ...>laptop...>LAN ...>Xbox i never did this before, how do i set it up right i go to NXE ..change under Network from Auto to Manually and put an IP adress, as i wish ..something like 192.168.1.X right? DNS gets the Router IP (Gataway) ...but do i need to do something more ..like on the Router interface? and second question do i need to update dashlaunch .. I am on 3.09

hi with my router TP-Link i did not manage to open ports for my xbox ..to use link i followed this guide Every Thing You Need to Know to Make LiNK Work - Tutorials - RealModScene the part that confused me is this once in the router’s setup page, navigate to networks and look for something called either UPnP or NAT (NAT=UPnP --- UPnP=NAT --- they both are same) and tick it if its not already ticked and if it is, then LEAVE IT ALONE. Next, navigate to application, under it click port forwarding and give it a rule name e.g. xbox, give it a ip address e.g. in my case its 192.168.2.76 there are 14 devices that are connected to my router; so that means ip address from 192.168.2.2 to 192.168.2.15 are already assigned. I took 76 because that way I know my xbox’s ip address will never conflict with other devices. Go to port range and type 1 in first box and 62222 in the next and select udp and tcp both. - Just be more sure that all your ports are forwarded correctly, you can insert your xbox’s ip address in the DMZ box and enable it. That way you are 100% sure that all your ports are forwarded. here is my Interface the point with "Go to port range and type 1 in first box and 62222 in the next and select udp and tcp both". confuses me a lot. i dont know wher to go - Virtual Servers`? or is it - Port Triggering? thats how Virtual Servers looks like sorry for my bad english you guys....

hi guys ...could you help me to set this up http://i.imgur.com/glfD2Ic.png i am confused if it is virtual server or the point under it...and where to set up the range ..which is mentioned in the TUT maybe you can help me thx

hi sorry guys maybe you can help me ..i am confused on this part of the TUT once in the router’s setup page, navigate to networks and look for something called either UPnP or NAT (NAT=UPnP --- UPnP=NAT --- they both are same) and tick it if its not already ticked and if it is, then LEAVE IT ALONE. Next, navigate to application, under it click port forwarding and give it a rule name e.g. xbox, give it a ip address e.g. in my case its 192.168.2.76 there are 14 devices that are connected to my router; so that means ip address from 192.168.2.2 to 192.168.2.15 are already assigned. I took 76 because that way I know my xbox’s ip address will never conflict with other devices. Go to port range and type 1 in first box and 62222 in the next and select udp and tcp both. - Just be more sure that all your ports are forwarded correctly, you can insert your xbox’s ip address in the DMZ box and enable it. That way you are 100% sure that all your ports are forwarded. i tried everything but i did not manage to set it up ...could you guys take a look at my interface ...is it Virutual Servers oder ist it Prort triggering ...and there is no port range ...also select udp and tcp both. this point is not working like this i can select at Trigger point on of both and ..on Incomming also one ..but i dont know the order...if you could help me ..it would be nice

Well ..no one seems to like my idea

Hi, first of all i am not a nativ speaker so excuse my bad englisch! anyway! recently we all (atleast i was that's for sure ) were sad and kinda shocked, as the team behind FS3 announced that they are not working anymore on a update. the thing is ...the reason is unclear ...and by all the respect, it's there choice to do so, but it's also a fact that freestyle still got potential ..unused potential. and that's exactly the thing i want to write about just as a pure theoretical question. what would it take to get a team to be motivated to keep the updates coming! well how about some fresh ideas to start with i am calling out all members to post some of this ideas! So we can see ...at first just for fun.. Creative Stimulation if you like so lol. here are some of my ideas, to break the ice. gui work! ..overall a remaped screenshot menu .Screenshots can be watch by pressing up for example ...watch ur own Screenshots show it your friends! video previews ..maybe .just like in that acrade machine emulator. and how about indie game support tab File Browser could be Simplified (more on that later) if it's technical possible shorter loading time at start up and shorter time on loading time on cover loading ...thats some of the points i was thinking of so once again ..would be nice if you guys bring up some ideas to ...who knows eventually we get something good here. so looking forward! Tx3

I kinda confused ..after dashlaunch asked me to update ..it didnt reboot ...after that i got to instaler runing at the same time ...i decided to delet the old one ..i dont know seems to work

hi when i start the default.xex dashlaunch freezing ...as soon as i press a, i get a black screen i am on 14699 Slim Trinity dashlaunch 3.05 tried from hdd and from usb any ideas ...

Got a probleme i copied all the files on my hdd than used fsd to start the default.xex in the installer folder and got a black screen i waited like 30-40 sec nothing happend. So i shut the box down, after that my box slim didnt want to boot i removed hdd and did unplug everything ...well now it boots again ...but i am kinda confused i am on Kernel 14699 ..and the dashlaunch i use ...must be quit old ...what should i do now?

What exactly you mean by use this at caution?

I guess the Playstation concept is still better xbone failed so hard this time

can i use the update function and by the way ...thank you guys

Yeah got xex menu ....but i guess i still wait till somebody tell's me for sure if it work or not

hi i am still on 483 can i use the in build update function ...i remember there was a thing were u should or could not update over this function...and my second question is i have a jasper with no wifi an currently no way to use a internet bridge ..can i update with just a pc and usb? overwrite FSD 3 folder with the new one?