Leaderboard

This is NOT for updating your JTAG/RGH dashboard/kernel, this is for installing Avatar/Kinect data ONLY. To change the dashboard/kernel version of your JTAG/RGH console, you build a new image with J-Runner or similar. Before you proceed, ensure you have an internal hard drive connected with enough space for the update (I think somewhere around 128MB is required). Also, ensure that you have DashLaunch installed and configured. So, you have a JTAG or RGH system, but no Avatars or Kinect? This small tutorial will help you install them (ensure your Kinect hardware is connected before you begin or you will be prompted to update again once you connect it!). Step 1 Download the USB system update from here (remember to check that the system update you download matches your JTAG/RGH kernel version - go to System Settings>Console Settings>System Info and read where it says Dashboard: 2.0.XXXXX.0, where X = your current dashboard/kernel version). Step 2 Extract the $systemupdate folder from the archive with 7-Zip or similar and rename it to $$ystemUpdate. Step 3 Transfer the $$ystemUpdate folder (the one you renamed in Step 2) to the root of a FAT32-formatted USB stick (I recommend 512MB+). Step 4 Connect your USB stick to your console, power it on and accept the update when prompted. There are different messages shown based on what the system update is going to apply. If you see this: Do NOT accept the update because this is telling you that the system is going to attempt a complete update which alters bootloaders and it will also burn eFUSEs. If you see this: It is fine to proceed with the update. This is the system telling you that additional components are missing. The console will reboot once the update has installed successfully and you should now see Avatars and have Kinect installed (don't forget to configure it!). If the console doesn't do anything, ensure that: The update folder is named correctly.The system update you are applying matches the JTAG/RGH dashboard/kernel version your console is currently running (see Step 1).You inserted the USB stick before booting the console (FSD can block the system update).If, after all this is attempted, the console still won't update, go into FSD and then into the File Manager, look for a SysExt: folder and delete what you can (don't forget to enable File Manager Advanced Mode in General Settings first). Reboot the console and you'll be told that there are corrupted files - reboot the console to resolve this. Do this with the USB stick connected and your console should prompt you to accept the update. I find that if I boot the console to NXE/Metro (hold RB after powering the console on) and THEN insert the USB stick, the update prompt shows up.

i think you are not pressing the right buttons or you are not transfering to the right direction!.. dont forget you have 2 windows in file manager, the one to the left and the one to the right. if you copy a file from the left window, then the right window should be the destination folder. I will give you an exemple: to the left, i have me folder ROMs i want to copy in emulator folder, and to the right, i have the destination folder, wich would be emulator. So to copy it, you go on the file, you press the ''right button'' of the controller and hold it, then click ''x'' to copy to the Emulator folder.. So, in file manager, one section is gonna be your files you want to copy, and the other will be the destination folder that you choose before copying files. Your error message is most likely because you are copying in the root of xbox instead of HDD..so you have to select the destination folder in file manager. (When you copy a folder or file in FSD file manager, the button on the controller (RB and LB) will choose the destination of the file/folder)

I'm about 5 hr in and it is crazy not much change in story people going nuts Destroy markers ect..., but the gun crafting is cool.I made a rivet gun early in game and it's my main gunfor now. If you have a save from DS2 and ME3 you get a N7 Suit and Planet cracker Plasma cutter.There are hundreds of combo to make custom blueprints.The enemies really don't let up all in your face but just stasis and rivet to wall lol.