Mr Saher 0 Posted August 20, 2015 Hi every one (My English is not very good) note My problem is : I have X-Box360 jtag Karnel 14699 Fs3 My brother want update the system or karnel (i don't know) But he put a wrong dashluanch in x-box The karnel is 14699 And he put the Dashluanch 3.9 😑 Another wrong step He did update for Dashluanch before system and karnel 😑 Now , my console dosen't work , just press a dvd button then the xell show up . What can i do please I want my console stsrt again normaly 😠Quote Share this post Link to post Share on other sites
frayed 33 Posted August 20, 2015 update your kernel to 17349 and update your dashlaunch to 3.15 1 Quote Share this post Link to post Share on other sites
Mr Saher 0 Posted August 20, 2015 Thank's man But i can't log to my console When i press a power button the yellow lamp (on) but the screen is blue (no signal) But if i press the dvd button the screen open the xell only I want any why to open my console again Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted August 20, 2015 http://www.realmodscene.com/index.php?/topic/2376-how-to-fix-non-booting-console-after-dashlaunch-update/ Tried reading this? Quote Share this post Link to post Share on other sites
Mr Saher 0 Posted August 20, 2015 Not work I want ask you some Qs 1- what is xenon ? In xell searching xenon .! 2- maybe there some files lost or delet fromx-box How can know that ? And How i can fix or update my console or dashboard from xell by using flahdesk ? Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted August 20, 2015 Not work I want ask you some Qs 1- what is xenon ? In xell searching xenon .! 2- maybe there some files lost or delet fromx-box How can know that ? And How i can fix or update my console or dashboard from xell by using flahdesk ? Maybe your console is a MMC Corona, in which case you have to resort to hardware to reflash the nand, you should still be able to dump it tho... 1. Xenon is 2 things, first; it's a motherboard model (the oldest model) second; a name used for XeLL Executables (xenon.elf) 2. Doubt it, the dashlaunch version you updated to was probably one of the partially broken ones, there were a few that we didn't properly test with older kernels prior to release which causes the console to not function properly once installed The tutorial explains to you the method, as long as you've got a NAND console and not a MMC... Quote Share this post Link to post Share on other sites
Mr Saher 0 Posted August 21, 2015 http://www.realmodscene.com/index.php?/topic/2376-how-to-fix-non-booting-console-after-dashlaunch-update/ Tried reading this?I really want to say (Thank you) so muchFor you Swizzy and Frayed My console now work 100% 💚💚💚 First step : I formate my flashdesk to Fat32 And i downloaded a rawflash_v4 rar in lap top then Extract the rawflash_4 rar And by xebuild i made a updflash.bin by use IP XELL and cpu key . I chose update 16756 ðŸ‘ðŸ»ðŸ‘🻠Then i change name file from updflash.bin to nandflash.bin After all this , i moved all files which extract from rawflash_v4 with nandflash.bin in flashdesk Fat32 Fainal step : plug flashdesk fat32 in Xbox console then turn on console from eject button (DVD button) , xell will read flashdesk and you can see numbers moving then it will stop . Then you can see this sentence ( shut down now ! ) Press "power" button normaly to turn off console Wait 10 sec , then turn on console again from "power" button too . Congratulations , your console back normaly againðŸ‘ðŸ»ðŸ‘ðŸ»ðŸ‘🻠Realy realy thank you guys ðŸ‘ðŸ»ðŸŒ¹ðŸŒ¹ Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted August 21, 2015 Np, now go update your console to 17349 using the latest xeBuild GUI Quote Share this post Link to post Share on other sites
Mr Saher 0 Posted August 22, 2015 Np, now go update your console to 17349 using the latest xeBuild GUI O.k ðŸ‘ðŸ»ðŸ‘ðŸ»ðŸ‘ðŸ»ðŸŒ¹ Quote Share this post Link to post Share on other sites