FaTaLiiTYz 56 Posted July 18, 2015 my ftp wont connect using aurora but it will in fsd, any advice please. I am fully setup right for unity if that means anything and my ip address is correct 1 Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted July 18, 2015 Probably xhttp being disabled in dashlaunch? Quote Share this post Link to post Share on other sites
falaga 81 Posted July 18, 2015 Aurora uses a different default username and password I think, just go into the settings and change them as you wish. Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted July 18, 2015 Probably xhttp being disabled in dashlaunch? xhttp is enabled swizzy... i cant connect from the pc to the jtag with aurora but it does fine using fsd, any other suggestions. Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted July 18, 2015 Woops, sorry... i missed out on the FTP part :$ Check that the FTP plugin is loaded, this is done by pressing the back button, on the left side <- you should see something related to FTP Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted July 18, 2015 Woops, sorry... i missed out on the FTP part :$ Check that the FTP plugin is loaded, this is done by pressing the back button, on the left side <- you should see something related to FTP it says loaded modules dashlaunch , ftp server , freestyle plugin sorted pal, needed to change flashfxp site settings, all works now just one more thing, what is the easiest way to move items between categories? 1 Quote Share this post Link to post Share on other sites
felida 1653 Posted July 18, 2015 it says loaded modules dashlaunch , ftp server , freestyle plugin sorted pal, needed to change flashfxp site settings, all works now just one more thing, what is the easiest way to move items between categories? there isn't a category.. like with FSD.. just filters.. you would set a filter up, then use it.. but you swap the filters by pressing the "shoulder" buttons.. Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted July 18, 2015 i un there isn't a category.. like with FSD.. just filters.. you would set a filter up, then use it.. but you swap the filters by pressing the "shoulder" buttons.. i understand that pal but i have my intellivision emulator in the Xbox classics category... and a few others in different places, how to put it in the right category. Quote Share this post Link to post Share on other sites
felida 1653 Posted July 18, 2015 i un i understand that pal but i have my intellivision emulator in the Xbox classics category... and a few others in different places, how to put it in the right category. well.. when you set the "PATH" in Content Scanning.. make sure you tag it with the script data: emulators.. you might have to delete the location and redo it.. otherwise you'll have to manually edit the DB If you do this with the "RetroArch cores" found here, then you'll be able to load the rom VIA the rombrowser feature.. Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted July 18, 2015 cheers for this help, can u point me to a tutorial on how to edit the db please ps i have other emulators that have been put into the right category, its just my intellivision one that appears in both categories xbox classics and emulators, if i hide it from xbox classics it disappears from emulators too. Quote Share this post Link to post Share on other sites
felida 1653 Posted July 18, 2015 cheers for this help, can u point me to a tutorial on how to edit the db please there isn't one.. you're better off just deleting the path, and redoing it with the emulators tag.. but if you insist.. you are gonna have to use sqldatabase editor.. or similar.. Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted July 18, 2015 there isn't one.. you're better off just deleting the path, and redoing it with the emulators tag.. but if you insist.. you are gonna have to use sqldatabase editor.. or similar.. lol Ive just got rid of it as i never used it anyway. Something else important is that within aurora, xexmenu and nxe2god (both these files are located in my content folder in which this is set to be scanned, did try at number 9 twice but cant see them, will i have to use these via the file manager?) are not visible in any categories but they are there within fsd, can u explain how this is please, thanks Quote Share this post Link to post Share on other sites
felida 1653 Posted July 18, 2015 lol Ive just got rid of it as i never used it anyway. Something else important is that within aurora, xexmenu and nxe2god (both these files are located in my content folder in which this is set to be scanned, did try at number 9 twice but cant see them, will i have to use these via the file manager?) are not visible in any categories but they are there within fsd, can u explain how this is please, thanks mine shows just fine.. you might want to check the show all option.. as it will show everything that has been scanned.. Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted July 18, 2015 If you do this with the "RetroArch cores" found here, then you'll be able to load the rom VIA the rombrowser feature.. Not with Xbox Classic emulators... Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted July 18, 2015 mine shows just fine.. you might want to check the show all option.. as it will show everything that has been scanned.. cheers for this info buddy, yes i checked the show all tab and xexmenu is there but not nxe2god, just wondering why its not gone into my home brew tab like the others. trying to access the webui using my ip address 192.168.0.4:9000 but it wont connect, is it down u think? Quote Share this post Link to post Share on other sites
felida 1653 Posted July 18, 2015 cheers for this info buddy, yes i checked the show all tab and xexmenu is there but not nxe2god, just wondering why its not gone into my home brew tab like the others. trying to access the webui using my ip address 192.168.0.4:9000 but it wont connect, is it down u think? it's :9999 but the webui is nothing like FSD.. Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted July 18, 2015 it's :9999 but the webui is nothing like FSD.. thanks for clearing that up for me, now works i see what u mean by limited, i just have 2 covers in my xbla not showing but they did in fsd. Tried refresh but they still wont show, guncraft and spacewar. Liking the speed of aurora and also got a couple of games working that wouldn't in fsd. Quote Share this post Link to post Share on other sites
felida 1653 Posted July 18, 2015 thanks for clearing that up for me, now works i see what u mean by limited, i just have 2 covers in my xbla not showing but they did in fsd. Tried refresh but they still wont show, guncraft and spacewar. Liking the speed of aurora and also got a couple of games working that wouldn't in fsd. Try Swizzy's Asset Editor.. for the game covers.. as there are none for guncraft.. on unity.. lolz Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted July 18, 2015 Try Swizzy's Asset Editor.. for the game covers.. as there are none for guncraft.. on unity.. lolz funny that coz fsb showed a cover Quote Share this post Link to post Share on other sites
felida 1653 Posted July 18, 2015 funny that coz fsb showed a cover well use Swizzy's editor(it will load the FSD cover).. and make it for Aurora.. and upload it to Unity.. problem solved ;-) 1 Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted July 18, 2015 wanna thank u guys for helping me out today, im not new to jtagging only to aurora. Glad i switched. Great work team 1 Quote Share this post Link to post Share on other sites
felida 1653 Posted July 18, 2015 wanna thank u guys for helping me out today, im not new to jtagging only to aurora. Glad i switched. Great work team well you mean RGH'ing.. as jtagable xbox's are few and rare now-a-days.. but yeah.. Aurora is a great dash.. can't wait til the new version comes out.. Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted July 18, 2015 funny that coz fsb showed a cover FSD used the frontside cover mainly (from xbox.com) which Aurora doesn't support, Aurora only supports full size covers (Front, Spine and Back) 1 Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted July 18, 2015 well you mean RGH'ing.. as jtagable xbox's are few and rare now-a-days.. but yeah.. Aurora is a great dash.. can't wait til the new version comes out.. I said jtagging bud coz i have a jasper jtag (original not RGH). looking forward to future updates from aurora myself. Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted July 18, 2015 FSD used the frontside cover mainly (from xbox.com) which Aurora doesn't support, Aurora only supports full size covers (Front, Spine and Back) I didnt know that.. Quote Share this post Link to post Share on other sites