FaTaLiiTYz 56 Posted April 15, 2014 hey guys, i hope this is the right section. i came to change my avatar today on the newest dashboard and they will not work? i have tried many things to get them working to no avail, i have all the latest avatars, 10000+, anyone else have this problem? ps, never had a problem on previous dash. Quote Share this post Link to post Share on other sites
irishdave 236 Posted April 15, 2014 having that many may cause it to crash. Make sure you have your avatar data installed if you updated your kernel. some of your avatar items may be pre-13604 dashboard, they'll appear as "?" in the avatar store and need to be deleted. Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted April 15, 2014 having that many may cause it to crash. Make sure you have your avatar data installed if you updated your kernel. some of your avatar items may be pre-13604 dashboard, they'll appear as "?" in the avatar store and need to be deleted. I always knew having that many items could cause it to crash but i never had a problem selecting any avatar in the previous dash, (4096 items per folder) i know there is a 4096 limit per folder so as a trial i changed that to 3996 items per folder but i still have the problem. My avatar data is always updated as soon as i update to the latest dash. edit:: i used the latest cod ghosts and its still the same, im using the latest dash, avatar data is installed. Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted April 16, 2014 I need for someone to confirm that all there avatars are working on the latest dash please. I have tried everything believe me. even reflashed my nand etc, my items all show within the memory through nxe dashbaord with no yellow exclamation marks on any of them I have scanned many times on setting 10 within fsd and it finds the avatars, when i select to customise my avatar it takes a short while for it to load the items, it then informs me my avatars has changed and that i need to sign in to live to update then? This happened previously but when i reselect to customise again, none of my items are there?? but they are there if i check through the nxe dash. any advise guys. Quote Share this post Link to post Share on other sites
irishdave 236 Posted April 16, 2014 Do the avatar items not need to be in their proper paths instead of your own custom path. I'm not aware of any avatar update issues, if you knew that avatar items were being updated it'll say it on the official xbox "Updating avatar items" if you remember that a few years back. Quote Share this post Link to post Share on other sites
irishdave 236 Posted April 16, 2014 also, I was referring to the avatar editor is only able to support a certain number of avatar items before it crashes. Try getting rid of some and see if that works. Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted April 16, 2014 ive always used a custom id folder without issues before the new update. i also tried cod ghosts in the original folder name and it still would not work. I know the xbox has a folder limitation of 4096 but like i said in my earlier post i tred just cod avatars and still they will not show, i am so confused. I reflashed my nand with the new dash again so that i could reinstall the avatar data but once updated through xell my avatar automatically appeared so i could not do the avatar update, i thought this was strange. Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted April 16, 2014 ive always used a custom id folder without issues before the new update. i also tried cod ghosts in the original folder name and it still would not work. I know the xbox has a folder limitation of 4096 but like i said in my earlier post i tred just cod avatars and still they will not show, i am so confused. I reflashed my nand with the new dash again so that i could reinstall the avatar data but once updated through xell my avatar automatically appeared so i could not do the avatar update, i thought this was strange. If your avatars are working it's not a problem on that front... Sent from my GT-I9300 using Tapatalk Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted April 16, 2014 only the standard avatars are working. none of mine are and they have my correct xuid inserted etc Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted April 16, 2014 That's what i meant... Sent from my GT-I9300 using Tapatalk Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted April 16, 2014 so what can i be then? I have created a new profle, injected a new xuid, installed the avatars and still not working, i cant see what else i am doing wrong!! Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted April 16, 2014 so what can i be then? I have created a new profle, injected a new xuid, installed the avatars and still not working, i cant see what else i am doing wrong!! Have you tried reverting back to where it was working? Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted April 16, 2014 Have you tried reverting back to where it was working? This is a jtag so I cant revert to a previous dash. everything was fine until i updated, i dont know what else to say pal. Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted April 16, 2014 This is a jtag so I cant revert to a previous dash. everything was fine until i updated, i dont know what else to say pal. Errr, what?! you can revert ANY hacked Xbox 360 to older HACKED dashboards... as long as you don't go retail you can revert to any older version you want (that's supported by the hack you currently have) All you have to do is make a new nand (or use the last dump you made before updating) and flash it... then run the avatar update for that version... and you're back where you came from Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted April 16, 2014 I never knew that, so if i use the original dumped nand from when it was jtagged and update it back to 16547 i wont get any errors or have problems, just wanna make sure. Just for my information, what do u mean by " as long as you dont go retail" I have an original jasper jtag and not a RGH console cheers Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted April 16, 2014 I never knew that, so if i use the original dumped nand from when it was jtagged and update it back to 16547 i wont get any errors or have problems, just wanna make sure. Just for my information, what do u mean by " as long as you dont go retail" I have an original jasper jtag and not a RGH console cheers You can use your original dump (made before it was hacked) as long as you didn't run an official update (went back to retail) at some point, this doesn't include installing the avatar data using the official update and you can also install any dashboard between 9199-16747 with zero problems as you have a JTAG... if you make patches for older versions you can install those aswell... down to the oldest version which supports Jasper consoles i believe, you might even be able to go back to the very first one (1888) if you patched it well enough to ignore various checks it does... Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted April 16, 2014 good info, what about dashlaunch, i currently have 3.12, if i revert back to 16547 will i need to use dashlaunch 3.11? thanks for your help. My original dash was 6717 and i have 2 nand compare dumps, may i use one of these, ie nand dump 1? Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted April 16, 2014 good info, what about dashlaunch, i currently have 3.12, if i revert back to 16547 will i need to use dashlaunch 3.11? thanks for your help. My original dash was 6717 and i have 2 nand compare dumps, may i use one of these, ie nand dump 1? Dashlaunch is backwards compatible, have you ever bothered reading the readme file? it says right there which versions are supported... however, with the previous version (3.11) the backwards support was slightly bugged (12625 and older didn't work) but it was fixed in 3.12 Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted April 17, 2014 well i think i will give up i flashed back to 16547 and still the same, i also tried 16537 to no avail, again i created a new profile gave it another xuid, flashed my avatar items with the same xuid and it still wont work. I even tried dl 3.10 and nothing. How can somehing just stop working when all was fine, i hadnt put any software on or messed with any settings, one day they was working and the next.... well u know the rest. I hope someone has an answer for me, cheers all. Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted April 17, 2014 im just wondering if this is right. when i upload my avatars and then go to change them i always get this message: your avatar has changed and needs to update its clothes. To update them, sign into xbox live I remember getting this message prior to them not working though, or am i missing something or a setting perhaps. Quote Share this post Link to post Share on other sites
Swizzy 2084 Posted April 17, 2014 im just wondering if this is right. when i upload my avatars and then go to change them i always get this message: your avatar has changed and needs to update its clothes. To update them, sign into xbox live I remember getting this message prior to them not working though, or am i missing something or a setting perhaps. that probably means that the files have changed over time and the files you have need to be updated... Quote Share this post Link to post Share on other sites
FaTaLiiTYz 56 Posted April 18, 2014 how will i update my avatar items if i cant connect to live? Quote Share this post Link to post Share on other sites