devilhunter

I agree with you to some degree, the cpu is usually the interesting part & usually sony / microsoft make consoles with far ahead technology. In other words, you get a respected machine for multimedia. It doesnt make sense to own an xbox, ps4 and a pc considering all the console games are going to run on PC, what a waste of money and space. I believe the initial price point of the ps3 is the cause of all this madness combined with how hard "Coding" on powerPc is.

My brother's ps4 was collecting dust in my room for a year, this console generation is rubbish. However, there are few promising titles coming in 2017 (Horizon, Last of Us, God of war, etc) mostly exclusive to say the least. I think ps5 will be released in 2018 to compete with scorpio. The only true "next gen" console is wii u; the others are simply pc in a branded box. I hope Sony/Microshaft switch to IBM

You are quite late, the scene is stopping, however, you can start when the xbox one or the ps4 are hacked.

Found the issue, the r8c2 resistor (CPU_RST) is reading infinite value, I replaced it with 1k ohm resistor but the console is refusing to boot now on stock. I need a microscope to check the connections.

Im goining to use the alternative points today (for both PLL and CPU RST) and report back, for some reason Im not receiving notification anymore on this site.

Cuz I had to reroute the wires more than 5 times if not more. In addition to that, I didnt clean it with alcohol. I have RGHed many consoles, this one is a pain in the ass.

what kind of issues? Screen shot please.

Greetings, I'm facing a problem as illustrated in the video link below (trying to boot xell), I tried both CLK points (the on top and the bottom of the board) with no luck. Ive followed all the common practices, etc trimming the wires and wire paths. At last, I flashed back the original nand dump, it gives RROD (0022) in 3-4 seconds when both CPU_RST or CLK are connected to the glitcher. Otherwise, it boots normally when either one of them is disconnected from the glitch board.Here is my wiring:htt Glitch/Nand Reader Product(s) used: J-R Programmer, CR3 Rev C (Clone I believe)Console Type: JasperNAND size: 512MbDashboard version: 1715CB version: 6754Screenshot of NAND details from J-Runner/Xebuild GUI: nothing special there, retail nand.J-Runner/Xebuild Gui log:updflash.bin log (if applicable):Image of Glitch Chip: https://postimg.org/image/5isky4cyv/ Images of close-up soldering to motherboard: ps://postimg.org/image/5rq5o1prb/ https://postimg.org/image/8od6obvl3/ https://postimg.org/image/pi4wl98lx/ https://postimg.org/image/ynwrb8wgx/ Im currently using this clk point Description of problem: Failing to get into xell, console boots fine when CLK or CPU_RST is disconnected from the glitch chip.Was the console working before you started: YDo you get a green debug light appear on the RGH chip every 4-5 seconds: YHow long is the light on for each time: 3-4 times per second. Video link: for some reason, Im getting two video windows even though I placed one video link.

if you have a jtagged/RGH/ or whatever hacked console running a modified latest dashboard as of now, then yes your xbox will run all games as of now.

simply select your iso and then click on image tools-->Browse--->Extract

http://www.teamx360.co.uk/forum/-15432-s-development-section/rgh-1-2/rgh-1-2-jasper/3450-rapid-green-debug-led-flashing-rgh-1-2-wiring-on-cr3-rev-c/page2

simply extract the content of the iso using "Xbox Backup Creator" to a folder you specify. We are lazy compared to devs

I have a modified the latest muppen and it works on hitachi, not sure if this is relevant to your message.

Why you would need dvd communication anyways if you are running mupen64? Im not a dev or experienced programmer but I remember to get the latest muppen to work on hitachi drive.

Im surely considering that.

Tried that already.

that would be worth trying.

thanks for your kind words, aside from your obtaining your soul, I was interested to know what's causing the issue, I had a huge debate in two of the modding forum and the conclusion was simply "its a stubborn" jasper. I should note Ive installed RGH successfully on many machine all scuessful with 3 glitch cycles at max (first cycle usually the case) P.S I have 90% DHL freight discount on all outgoing items for real -.-"

never meant to be rude, I was sincerely offering my xbox for inspection.

i have 90% discount on freight shipping, dont dodge this jasper

I do have the board, it glitches once and I do have the CPU key. As I said in rare cases few Jasper are "stubborn" as they call it. I can can send it to you along with the DVD pcb and a glitch chip for free. You can mod it and sell it for over 150$ if you fail however, Satan would grant me your soul.

I tried rgh1.2 r-jtag and rgh2, it booted once using rgh2 in 2 mins if tampering with glitcher capacitor usually yelids to better boot time, why wouldn't the same be implacable on xenon and zephyr ?

Gavin, told you, I only had one unglitchable jasper, in my last attempt I sent t to a workshop but the console doesn't glitch, I still have the board and I can send it to you. I myself have installed glitch chips on few consoles to be frank. In addition to that, some modders suggested to use the alternative points to achieve glitching. I cant see why R-Jtag is an option to go for nowadays, by simply adding 100 nf capacitor to the glitcher you can instant boot times on most Jaspers. The reason I'm ditching R-Jtag is the current given documentation by the makers suggest the use of CR4 knowing that they forgot to program the chip to work on phat consoles during the manufacturing process.

Ok kindly pm me your best price for the consoles

R-jtag is a rip off by team excited, the new cr4 xl chip doesn't glitch fatties anymore. Rgh1.2 is solid and can be done with many glitch chip. Mid recommend ace