dolphinx

dont worry, once you change gpu/cpu fan settings from Dashlaunch things started going wrong in FSD Only change fan settings from FSD, never try to adjust settings from dashlaunch Now, you have to wait till new Microsoft update, when you update your JTAG next time you'll see that settings in Dashlaunch returned to defaults (even if now you try to return default settings from dashlaunch it wont recognise) there's new microsoft update 16747 these days, take XeBuild and make update and never change gpu/cpu fan speeds from daslaunch, from FSD adjust it like 65% min.

Tekken Tag Tournament 2 's title id is 4E4D0859 In covers.jqe.com shawiz put Teeken X Street Fighter cover with title id 4E4D0859 which is wrong (it must be 4343080F) Because of it whwnever I install tekken tag tournament 2 and click on refresh to install cover I get a cover for Tekken X Street Fighter Can administrators at covers.jqe.com correct this mistake and remove shawiz's cover or correct its title ID

which games you would like to play I play multi disc games like max payne, mass effect 3, dead space 3, rage fine and both discs installed first create god format and/or install via NXE dash the first disc, after it is scanned and added into games list rename it like xxx disc 1 then do the same for the second disc eg. after the end of first disc it automotically continues with the second disc games like forza 4, battlefield 3; you've to install second disc of forza 4 or hd textures of BF3 from a already burned dvd or you can extract already installed file from your friends console, copy and paste it into appropriate folder in your hdd

Changing temperatures from Daslaunch's System Information; Fan set to AUTO, then - without touching CPU override and without checking box next to it - I dropped CPU,GPU,RAM temperatures to 60,60,60 and next boot fan started even more louder. CPU override's original value was set to 40% and it was far louder than FSD's 65% fan setting I put the settings to its original values. Now I consider adjusting CPU override to 30% and checking box next to it It would be far better if FSD Team adds Fan Settings like 20%, 30%, 40%, 50% next to AUTO I think 40% will be enough to maintain temperatures at 60C after playing Crysis 3 for 2hrs If you have a silent and cool configuration set from Dashlaunch for CPU,GPU,RAM and CPU override value (box needs to be checked or not) please write I also experienced below before; From dashlaunch adjusted CPU,GPU,RAM to 55C, checked box next to CPU override remaining at 40% when I returned back to FSD fan was silent when compared to 65% of FSD fan setting but when I moved it from AUTO to 65% from FSD, fan started spinning crazy, even more than 100% setting of FSD I restarted console and I saw that it was more louder and faster than 100% when turning from AUTO 65% was selected I erased and re-installed dashlaunch and now it is OK

There is no change in temperatures with the latest update Also I hear strange buzzing noise sometimes for a short time at AUTO setting when I enter or exit games, at some levels etc. When at 65% this buzzing sound is even higher

I have slim x360, matrix chip ver1 and FSD 3 updated to latest 735 without any problems As always fan settings come Auto, 60% ... When set to Auto cpu temp. after an hour with Crysis 3 is 76 C when set to 60% cpu temp. after an hour with Crysis 3 is 54 C but too loud Is there a way - a future setting - to adjust fan speed at 30% or 40% from FSD dash

Before I started all, it was on AUTO Yeah, after this happened if it says on AUTO no problem when booting and during games but if I shift it to eg. %65 from FSD, it was like before when I return back to AUTO after %65 , it is where the problem occurs. Louder fan with spinning maybe more than 100% adjustement I return back to daslaunch, select CPU overdrive bar - save than it stays no louder at AUTO

I was using fan speed bar at 65% in FSD. It was very loud then I decided to adjust it via Dashlaunch. I adjusted CPU,GPU,Ram temperatures to 50C from System Information, but did not select anything on the Cpu Override bar. After saving the setting it reloaded FSD. It was silent but as for me temperature was still 60 - 64C. I put setting to AUTO in FSD. Then I decided to select the square next to Cpu Override bar in Dashlaunch with it remaining at 40%. I saved it and restarted FSD. Everyhing was good, silent and cool. But now I have one problem. Whenever I move temperature bar in FSD from AUTO to another (like 65%) and return back to AUTO fan rotates crazy loud. Then I had to go to dashlaunch and unselect the square next to Cpu Override bar. Everyhing is fine at AUTO in FSD. How can I solve this. I use FSD3 and dashlunch 3.07 with Slim x360 console Will re-flashing NAND help ....