mony123

So , I removed the Wire From the Resonator But i Can get it Back HERE IT IS I WROTE THE ECC BEFORE WRITING NAND DEOS IT MATTERS OR Should i Wirte IT AFTER THE NAND ?

Hey, I GOT IT WORKING )))))) It BOOTED SUCESSFULLY IN THE FIRST FULL FUNCTION PROPER GLITCHING Booted in 10 SSECSSSS Well Now I dont know What happened AFter the first boot I deos not Now even power on As before ( i did nothing

I used An SD card reader method For Tx Cr I succesfully reprogrammed with jtag xilink cable And i used Jrunner

Okay I lifted the Wire From Crystal to ground resonator But the consle Is still not lighting up the fan is not starting to spin i wrote the nand succesfully

Yeah I Got A 48MB nand exactly, And The nands Are the same no Bad blocks And Yes I created An XeBuild Image that Is Created AS UPDflash.bin And its exactly 48Mb IDK what happened The console Doesn't even start up No green lights no red lights nothing Well I Can Still Write And REad Nand, I have A Programming Cable For cool runner too What should i do sir thnx

Write Ecc Or The Write Nand Option After creating Image what do you mean Life wire from the crystal Thnx

Soldered It and Got It Working Well Now I have 2 Nand dumps.bin No bad blocks Nand are the same it says Now What Do I have to DO ? I Created A Image Xebuild Image RGH 2 Corona 4gb After writing it The console Doesnt even boot anymore what do i have to do I have a cool runner installed in ! DO i Have to program it again ? I does Have power red light Nothing else The console gives nothing just Nothing !

I have Made A SD NAND READ WRITE KIT I didnt solder it to the board is there a risk ? And DO i have to use the Flux Because on the solder it says 2.2g flux pre applied !

THANK YOU BUDDY SWIZZY IS AWESOME !

Thank you For your Help ,Awesome ! Last Question? If I use LPT cable ,Like this one (http://www.se7ensins.com/forums/threads/jtag-rgh-r-jtag-xbox-360-ultimate-exploit-guide.804054/) will it wok ? Sorry to disturb you dude THANK YOU SWIZZY !

Please Can You help me Boot Into Linux ,So I Can USE FTP I have A Proper Image Built , and Thus Can Access Flash Memory Too !?

Dude I there ANY other WAy I dont Have the Wires or Things I just Wanna Boot TO dash Or linux Somehow ?

Hello, Whats Up guys, So..... Things I have 1) A Cool Runner ( programmed soldered) 2) A flashdmp.bin and 3)updlfash.bin 4)Xell Reloaded 5)Cpu Key Dvd key EVERYTHING ! 6)Corona 4gb 7)48 MB PROPER UPDFLASH.bin FIle ! 8) Configured Launch.ini file With Dashlaunch What Happened ? Now I am Realllyyyy F****d up 1) Single Red Dot (Bad Update), just Boot's TO XELLRELOADED ( 4gb Console ) 2) I booted into xell reloaded with a new flash drive formatted to FAt 32 and feeded with updflash.bin It didn't work 3) raw flash v3 , v4 goes black Screen 4) I am AT a Far Place With no Such Eqiupment What should I DO PLEASE help :'(