s8n

thanks for the info pulse......................... interestingly when i hook this 360 up to my Panasonic Plasma via HDMI it gives a crazy image , but if i hook it up to my Samsung PC Monitor through HDMI and CRT TV ( composite ) its fine. My HDTV ( Panasonic ) works with 4 other 360's i have and 6 PS3's , i have read in a forum ( ps3hax ) that someone returned their Panasonic HDTV due to a HDMI fault it was manufactured the same year as mine. so im a bit stuck is my HDTV causing the wacky image or this Reflow was done incorrectly and damaged the GPU ? i may be able to get a refund as i bought it off ebay.................... what do you guys think ?

yes thats i what i beleive too , either hes not very good at what he does or beleives in something that is not true.................... thanks for your input Gonzo

hi members and Swizzy , i bought recently x3 Jasper 360's and have installed x2 in 2 of the 360's. The last 360 left has had a X-Clamp mod and Reflow on the GPU and CPU , according to the seller it has never RROD i was wondering if the Reflow has messed with the integrity of the solder under the GPU and CPU making it weaker than out of the factory. chat soon

i did some testing today on temps , one photo is of 2 12V Fans and my Fan mod on top the other is the 2 stock Fans which run at 5V.

thanks Swizzy i just installed it in Aurora , your definitely going to heaven

thanks Swizzy , bummer though was hoping to play some VT3 online

the Media ID is 394F9157

hi guys , im having some trouble with ' System Link ' so i can play online its greyed out.....................i cant get it working in Aurora or FSD i have installed the below http://www.realmodscene.com/index.php?/topic/347-how-to-install-avatar-kinect-data-on-a-jtagrgh-console/ -Unity Connection enabled -LiNK enabled -UPNP enabled -Verify Link Settings all passed -devlink: false -pingpatch: true -Kernel version 2.0.16747.0 ive tried a few games.................. Street Fighter IV Super Street Fighter IV Virtua Tennis 3 ive also downloaded Title Updates for the games and are enabled

hi members and Swizzy , i just cant find this Title Update through google searches and its not available through Aurora. if anyone knows where i can get it please reply

thanks all for your tips , Swizzy does it again though Soul Calibur working

hi members and Swizzy , i cant get this game out of Demo mode ive got the game from 2 different sources and still cant get it working right. My process is the below. 66ACD9CE42F0DB47E788F0567BD92B4332A0681E58 > launch and check in 360 Content Manager if its Unlocked > Horizon ( extract all files to Soul Calibur folder ) > put the Soul Calibur folder on USB Hard Drive and try on Aurora. stumped

definitely ok if you have any DLC or Title Updates delete them within Aurora , next make sure your Title ID of the DLC matches the game you want to use the DLC on. You can check the game Title ID in Aurora and the DLC Title ID in ' 360 Content Manager ' software which you need to download in ' 360 Content Manager ' find and select the DLC and FTP it to your 360 ( make sure the DLC is Unlocked ) , next in Aurora download the latest Title Update and enable it. you probably dont have to do the next step but i restarted Aurora , when Aurora is back up and running play the game and see if the DLC worked

i finally got the DLC working in Deathsmiles , took a bit of trial and error but i got there ...............

hi Swizzy , i downloaded a torrent collection of DLC so who knows.............also i cant read the message it tells me as i cant read Japanese but it does say XBOX Live in English amongst the Japanese. i must say there are about 6 modes in Deathsmiles and 4 work including one Mega Black Label the other 2 MBL gives the message btw i sent you a ' thank you ' PM today

hi members and Swizzy , i have used the guide/tutorial below and it seems its not working or something else. What happens is theres a mode amongst others to choose from and if i select ' Mega Black Label ' i get a message in Japanese it does say XBOX Live within it in English. the DLC is unlocked btw.................

+1 on replacing the Thermal Compound.................... you could also do as ive done below , as well i have Talismoon 12V Fans the default 360 Fans run at 5V btw hi Swizzy

hi Swizzy great tips as usual , below is my guide/tutorial a very small portion is copied and pasted from the Coolrunner manual. 1. solder QSB's to XBOX motherboard , after that plug in power and power on the 360. if it boots fine the soldering is good and theres no bridges or other problems etc............. 2. turn off and disconnect power from 360 , then connect J-Runner IMPORTANT plug in power but dont turn the 360 on fire up J-Runner software , do 4 Reads of the NAND make sure NAND Type is set for the motherboard make sure theres no errors in the log................... after 4 Reads done compare NANDs so they match........... compare 1 and 2 then 3 and 4 then 1 and 3 if they all match zip up the NAND files , they will most likey be in the ' output ' folder FLASHCONFIG - MOTHERBOARD TYPE 01198010 - Xenon, Zephyr, Opus, Falcon 00023010 - Jasper 16mb, Trinity 16mb 008A3020 - Jasper 256mb 00AA3020 - Jasper 512mb if motherboard is not 00023010 - Jasper 16mb, Trinity 16mb , contact Swizzy 3. now write the ECC , make sure there are no errors in the log once written wait 30 seconds then disconnect power and wait 30 more seconds. remove J-Runner cables from QSB's............... now solder wires from the Coolrunner 4 to the QSB's and motherboard. 4. try and boot XELL , plug in power and network cable turn on 360 from the front of the console once XELL has fully loaded get the IP address of the 360 and enter it into J-Runner software. hit ' Get CPU Key ' J-Runner should show KV info when it retrieves the CPU Key 5. J-Runner should reload your nanddump1.bin into source box again in preparation of key validation and image creation if it doesnt automatically reload it ' browse ' and manually load nanddump1.bin into the source box Now you should have all the info in KV tab in the right hand box and you will get a CPU Key verified message in the log take a snapshot of the screen with Hypersnap of ............ NAND info KV info Bad Blocks At this point you now have all the info you need to create a Freeboot image. Turn off XBOX and disconnect power , wait 30 seconds 6. Reconnect J-Runner Programmer and connect power but dont turn on the XBOX in J-Runner software goto Dashlaunch tab and enable ' use Dashlaunch ' enable ' include launch.ini ' use the configurator to my liking in J-Runner create launch.ini save the settings Now click Create XeBuild Image button make sure theres no errors in the log 7. Now flash this image to your NAND press Write NAND make sure theres no errors................... Once finished flashing wait 30 seconds unplug power and wait for 30 more seconds remove J-Runner Programmer then plug in USB hard drive with FreeStyleDash on it Then replug power to 360 and turn on

hi Anonymous , ive been researching and planning for about 6 months now it is my first time modding a 360. The motherboard is a Jasper , i have read 2 different Tutorials and watched Youtube videos from Keil423 and thedopesoner930 ive also asked questions over at TX forums and here. ive written my own guide/tutorial after researching for my own use , i will use it when the Coolrunners arrive i want to get Swizzy to check the guide/tutorial i wrote at some point

hi members and Swizzy , im currently on 16537 and thinking of updating the dash to 16747 via USB will i be able to RGH the console ? i believe i can but want to be sure btw my Coolrunner 4's have been shipped and should arrive Monday

hi Swizzy , man do you ever sleep ? whenever i post your there with a response ! the RF Module i got is a Rev H Model RF01............ ive already contacted the seller hes going to send me out another one , but if it were an easy fix with this defective one it would be worth it

hi members and Swizzy , i bought a few RF Modules so i can mod the LED's and one of the Modules wont sync with my Controller............ ive tried a few things but to no avail , i was wondering what could be the problem with it and a possible fix i havent modded it yet its still stock , the LED's fire up but i cant sync

another great tip from Swizzy.................. thanks mate

hi frayed , good tip ! i just checked and abgx360 is saying ' Min Kernel Required: v2.0.16537.0 '

roger that btw i pre-ordered 3 CR4's the other day

hi members , this just came out and i was wondering what Dash is needed to run this game.................. PS.......hi Swizzy