mafia4

@Octal450

Josh, I think balika is busy these days.

I think you should do something by yourself for the fix.

Hello @Octal450

Will there be any Audible Feedback IC tutorial or pinout or ... ??

Still waiting for the fix.

2 hours ago, Cerial_iQ said:

Hello,

although I am not Octal450, I will try to help.

I have been using picoflasher for a few days, and I can say that you have to be careful when reading nands, because if the correct installation is not verified in the console, we will get corrupted readings. Verifying the installation is not really difficult, just follow these steps.

 

 

Before trying to read the nand, press the button that is in box 1

a bad installation will show messages like the ones in box 2:

"Unrecognized Flash Config": Indicates that some connected nand is detected, but the system is not identified. Try to check the wiring.

"Console Not Found": Indicates that it does not detect anything connected to the picoflasher. Try connecting the power supply to the console first and then the picoflasher to the computer. or the picoflasher to the computer and then the power supply. and if this does not work check the wiring.

"Corona 4GB (EMMC not connected)": similar to "Unrecognized Flash Config" but in Corona 4GB

As seen in box 2, the wrong detection of the console will generate corrupt readings.

 

But if pressing the button in box 1 correctly detects the console, the type of console detected will be displayed. like Box 3, these are:

"Xenon, Zephyr, Falcon"
"Jasper 16MB, Trinity"
"Jasper 256MB"
"Jasper 512MB"
"Corona 16MB"
"Corona 4GB"

When the verification is correct, the readings will also be correct.

Salu2

Cerial i.Q.

Thanks for the help.

But while im doing these steps it keeps dumping the full nand.

I want to use the picoflasher for its fast reading, in this situation its slower than the nand-x.

Hello @Octal450

Josh, With the new picoflash support it reads all the 512 mb of the jaspers big block nand.

it is like a full dump.

After you get the full dump you will get wrong header.

What should i do to read the first 64 mb of the nand ?
 

@Octal450 Hi Josh,

Can you add blackcats Xell to the Jrunner ???

Its very useful for winbond super slims.