smoking_byte 0 Posted March 1 I am attempting the RGH3 using Glitch2 with J-Runner with extras on a Corona 4gb. I have a Raspi pico flashed with picoflasher. I had everything wired up and was able to get a successful read on both nands. See log output below. I create the glitch file, and write. Seems successful but even after removing all of my pins and connecting the dvd and sdd back, no video and I have a solid green dot on the power button. Help would be awesome. ========================================================================= J-Runner with Extras Session: 03/01/2024 14:45:04 Version: 3.3.0 r3 Status: Up to date Checking Console... Corona: 4GB (eMMC connected) Reading Nand to C:\Users\iiapo\Downloads\J-Runner-with-Extras\output\nanddump1.bin Read Successful! Initializing nanddump1.bin, please wait... Glitch2 selected RGH3 selected Winbond 2K selected Nand Initialization Finished Reading Nand to C:\Users\iiapo\Downloads\J-Runner-with-Extras\output\nanddump2.bin Read Successful! Comparing, please wait... Nands are the same XeLL image created Checking Console... Corona: 4GB (eMMC connected) Writing glitch.ecc to Nand Write Successful! Quote Share this post Link to post Share on other sites
smoking_byte 0 Posted March 1 Heres a pic of the wiring. Mind the flux, nothing is burnt https://imgur.com/gallery/fV7eUV4 Quote Share this post Link to post Share on other sites
