dolphinx 0 Posted February 25, 2013 I was using fan speed bar at 65% in FSD. It was very loud then I decided to adjust it via Dashlaunch. I adjusted CPU,GPU,Ram temperatures to 50C from System Information, but did not select anything on the Cpu Override bar. After saving the setting it reloaded FSD. It was silent but as for me temperature was still 60 - 64C. I put setting to AUTO in FSD. Then I decided to select the square next to Cpu Override bar in Dashlaunch with it remaining at 40%. I saved it and restarted FSD. Everyhing was good, silent and cool. But now I have one problem. Whenever I move temperature bar in FSD from AUTO to another (like 65%) and return back to AUTO fan rotates crazy loud. Then I had to go to dashlaunch and unselect the square next to Cpu Override bar. Everyhing is fine at AUTO in FSD. How can I solve this. I use FSD3 and dashlunch 3.07 with Slim x360 console Will re-flashing NAND help .... Quote Share this post Link to post Share on other sites
JPizzle 0 Posted February 25, 2013 when using dashlaunch or XeBuild to modify your temperature threshold you should keep the FSD fan settings on auto Quote Share this post Link to post Share on other sites
dolphinx 0 Posted February 25, 2013 when using dashlaunch or XeBuild to modify your temperature threshold you should keep the FSD fan settings on auto Before I started all, it was on AUTO Yeah, after this happened if it says on AUTO no problem when booting and during games but if I shift it to eg. %65 from FSD, it was like before when I return back to AUTO after %65 , it is where the problem occurs. Louder fan with spinning maybe more than 100% adjustement I return back to daslaunch, select CPU overdrive bar - save than it stays no louder at AUTO Quote Share this post Link to post Share on other sites