-
Content Count
226 -
Joined
-
Last visited
-
Days Won
4
Posts posted by superted76
-
-
I thought of region for that differing Media ID's maybe Swizzy? Or does that not matter with DLC.....
-
Dumb question but did you press guide press left select my games and press A and see if that took you into NXE?
-
Sound duely noted
Sent from my HTC One_M8 using Tapatalk
-
play online????? be specific do you mean system link online or xblive online, both very different. Can you still run xell by powering console with eject tray? do you still have udpflash.bin/flashdump.bin????
-
Well like Swizzy said restricted content. There is a way but you'll need to find it and it's simple enough
Sent from my HTC One_M8 using Tapatalk
-
Horizon reads the partition the same as fatx does so if he gets an error loading with that then the HDD needs replaced. Could possibly buy hdd regenerator and see if you can rebuild it.....
Sent from my HTC One_M8 using Tapatalk
- 1
-
Either way compatibility packs I'm sure are required. Google search for them they shouldn't be hard to find
Sent from my HTC One_M8 using Tapatalk
- 1
-
No don't allocate or make a volume see if you can find freeware minitool powerdata recovery. It's quite possibly your only option unless someone else jumps on with something new
Sent from my HTC One_M8 using Tapatalk
Slap me now. Try downloading horizon first
Sent from my HTC One_M8 using Tapatalk
-
Hey, I meant the HDD that is inside the Xbox360. On the external HDD I can just replace the cable, yes, but it's unimportant for me right now, because I can't even boot to Aurora/FSD3. I tried connecting my disk but it doesn't even appear on the PC, and when using an explorer for Xbox 360 HDDs I get an error. HOWEVER, the HDD does show up in my BIOS. As for restarting Samba on PC I tried, but the thing is I disabled Samba before restarting the Xbox, because Aurora does not use Samba and I don't use FSD regularly anymore.
Also, at one point when I was using my Xbox the same happened, but I've restarted the Xbox and it got back to normal for some reason.. Now it doesn't, no matter what I do.
Well unfortunately your possibly lookin at a new HDD then. If it shows up in device manager, right click my computer desktop icon select manage then disk management and see if the disk can be initialized that way for widows to see as a drive but if all xtaf and fatxplorers are sayin error then outlook does not look good. Unsure as to why 500kbs to 10mbs then defective, strange course of action, you would expect the 500kbps to be cable associated and the 10mbs lan associated and the internal drive seemed to cope with both but sounds like the spindown time may have been affected by the reboot.........
-
is it External thats unformatted or the xbox hdd? xbox hdd - plug it onto pc and run chkdsk and see if that gives issues if you can get the bare drive out the caddy and direct connect via sata to mobo for best results. have you tried reconnecting the ethernet cable and restarting samba on the pc and switch 360 on? If its the external drive why not just replace the cable in question as that could be giving a false reading......wee bit more info if you can please
-
is there a way to repair it by myself?
you live in uk i could mail you a 60gb for the price of shipping
-
Hello i have a problem in a game of Black Ops 2 when he was admitted to the game and then go into a zombie, and then I want to play online via system link then click on it and enter and test the map tells me fatal crash intercepted and me out of the game and I can not play online twoWhat's the solution?do you have all compatibility pack and title updates installed?
-
Done E3 linker solder also nor tristate to keep alive and have the clips but don't feel the dumps are near as precise with clips so I'm all good with loads of wires soler and such. Appreciate your taking a look for me and offering to help I'm sure I'll have a few issues before I hit the jackpot
Sent from my HTC One_M8 using Tapatalk
-
So...
JR-Programmer to read/wright Nand
I still use my NandX to program the chip i really don´t know if the JR-Programmer is capable but it guess so.
As you are talking about Phats. There is just to ways.. RGH2 or RGH1.2
RGH2 on Phats was always a hell of try and Error... i tryed this a few times but most of the Boxes were a pain....
So i got that "Squirt Reloaded" (the one we are talking about right now) wich are totaly SUPERB für RGH2 on Phats. ;-)
RGH1.2 should work with all the mentioned chips from yours but... never tryed it till now as the Killer for RGH2 is this Squirt without hustle.
But the "usual" Chips are much cheaper your REV.D and the ACE360 should work just fine. ;-)
===================
Back to topic...
It´s totaly strange sometimes it boots proper sometimes don´t even without messing with the cables. Like the Chip is not proper shut down after Glitching/Booting sometimes... It happens then it don´t than again even without even looking @ the Wires. ??!!!
Could that be something in the timing file of Squirt? @Swizzy ???
That is a strange one unfortunately never programmed one so unsure if timing would affect video but no doubt I'll know soon enough lol.
>>> http://www.xpgamesaves.com/topic/91094-common-jtagrgh-errors-and-causesfixes/ <<< just found this maybe worth a look
HA! Day off tomorrow so guess what I'll be attempting. Recommend any up to date tut's for RGH on PHAT? Got a couple of ps3's to do tomorrow so I'm as well going hell bent for leather and see if I can pull it off
- 1
-
I´ll do everything i can make money with ;-)
I´m doing this for about seven years now official and longer before. I got a lot of stuff laying around.
What are you looking for?
Well I've not long got my RJTAG ( I Think ) but someone else done the install as I've primarily been doing PS3CFW so never done 360 exploit ( jungleflashing dvd roms don't count done loads ). I already have a JR Programmer an ACE360 v2 and a Coolrunner REV.D Corona as well as some old PHAT 360 Consoles laying around, so if I were to RGH or similar what would I need, or do I have already the necessary tools for the 360. If not then you'll answer your own question as you have a better knowledge than I. Obviously wiring solder station etc I have also.
-
LOL......what's the possibility of a loose connection elsewhere on the board or maybe it just touching/overlapping something. Try maybe grounding it elsewhere on the console see if that helps?ahhh wasn´t that easy.
Worked exactly one time without the Blur...
Than again... But.. Just with that Squirt. . . No probs with the Rev.D...
I´ll have a deeper look ..
Quick question off topic, Does the shop link your name only sell/repair consoles or do they do components as well?
-
@ Superted76:
Just wired a thicker Ground Cable to the Body of the AV-Housing. That was it! ;-)
Before that the G-Wire was soldered just to the Ground Port on the Board that would cause the Issue.
Now everythings fine. Sadly i read your post after finding out ;-)
Thanks anyway this is solved then ;-)
All good my friend it's what we're here for glad you managed to sort it and your post will allow others to solve if they had the same problem
- 2
-
Hey up there people ;-)
Well i got here my own Corona V1 . Everythings fine with it. But....
Since a few minutes ago she was fitted with a CR Rev.D worked like a charme but Boottimes could have been better.
So i found that nice "Reloaded" laying around here. They do perfect Bootimes always so i deceided to give it a go.
Just soldered the Rev.D out, Programmed the Reloaded and soldered it in.
Bootet instant but... the Video output is "Blurry" now with this chip.
I got shocked cause i thought now ROD is coming but after i changed the chips again everything was fine.
So the Video Interference is ONLY with the Squirt Reloaded 100MHZ.
Something must interfere with any component.
Is there anyone out there had this before or has a clue?
If needed Pictures are no Problem;-)
Thanks and Greetz Guys
Seb.
Did you make sure you had it grounded properly? Also was the blurred output HDMI/Component/AV Standard or all three? Googling it just now to see what I can find out for you.....
EDIT:// http://www.360squirt.com/support.php few PDF downloads on here maybe a firmware update needed?
- 1
-
Are there any users that play any of the system link capable racing games? It would be nice to get Forza 2 or PGR3 a go on LiNk
If your EU based and won't conflict with the UK time zone I'll happily play any racing game link capable with you just hit me up n let me know
-
Did you put the game on hdd through USB or ftp per chance?
-
Fan speed should not be set in dashlaunch you should only set the temp so say 55-65c Max temp then save....so open dashlaunch, system info (left shoulder button if I remember correctly) set Max temps then left shoulder again scroll to hdd1 press x and that's it saved.
Sent from my HTC One_M8 using Tapatalk
- 1
-
I downloaded a background it's 1280x720 it's was full the screen it's was jpeg it worked but when I restart my Xbox it's gone is there a way to make it default or make it always start with Aurora
you may need to alter from jpeg to png for it to always load......maybe.....dunno
- 1
-
Well yeah probally because I was accidently pressed delete on dashlaunch for fsd so I don't know how to back that?
if you can still access dashlaunch goto paths and set default to point to either default.xex in aurora folder or default.xex in FSD folder then right shoulder scroll to HDD1 and press X to save then B and viola whichever you chose should start up.....if however you cannot access dashlaunch you may have xexmenu installed in NXE dash under Games/Demos which would allow fsd/aurora/dashlaunch to be accessed.....need further help we'll not be far
- 2
-
Possible and I've just attributed it to that fault not gonna argue with an expert lol. Was wanting to try my first 360 mobo exploit got a few old phats a Jr programmer cool runner (says corona if that means anything) solder station and such wish me luck [emoji15]Neither phat nor slim have the blinking led when the key is wrong, it must've been something else causing the problem you had, such as not fully connected cables, or even a bad firmware written to the board...
Sent from my SM-G903F
Sent from my HTC One_M8 using Tapatalk
DLC not working right. I dunno
in Other topics
Posted