Stoyan K

That's true, my friend. Not everyone listen and understand the situation, but I can't do more. At least there are enough people, who follow me, because they know that I always try to keep my games clear of hackers and with good settings like - enough time, good maps and good game modes ( not for everybody ofcourse ), with default 10 slots for class, and without class restrictions . : )

My tactic - ending the game ASAP, when I see a hacker, then telling the guys via microphone why I ended it and then tell them to join my game in another room. If the hacker comes again, i say that I will do a private room, where I can kick him. : )

Now I have a microphone too, so everybody can hear a bit of my beatbox skills. : D. And ofcourse now all the people will know why I end the game and will tell them who is the hacker boy in the room. : )

Yes, my friend. Very often. : )

5 hours ago, Chuchox said:

As I said before the hackers found the way to enter the private rooms no matter if you put key, they enter and take control of the room

Its a rare situation. Best thing to do with hackers for now is making own room ( no password one ) and just to kick who you want. And ofcourse hoping, that Link will not timeout and to not be the "king" of the room anymore. : ) Worst scenario is when people don't understand why you end the game and they don't see that you make a new room and continue to stay in a public one and you stay alone in your own room. Then maybe a microphone is a good idea... : )

1 hour ago, Bashdar Halabjay said:

Now i use D link router i port forwarding it but for test i use that app.:D

Because in your situation, your ISP obviously allow port forwarding and your telephone app can only forward/open the ports on a local level. But as Swizzy said, if the ISP modems/ruters etc. are blocking the ports, you can't do anything ( maybe only calling your ISP to open some ports for you). ; )

On 1/16/2017 at 3:21 PM, diegocolque32 said:

but, you can see that in the file manager. Is it really necessary for you a script that will show the exact same thing that you can do with two buttons? honest question

Oh, I forgot , that this can be seen there. And yes - it is pretty much what I need and yes - it is really two clicks. Thanks for pointing this out . : )

Please, don't sorry, everything is more than enough and thank you !

Is it possible to have it, like how we could see it in FSD? It is not so important for me, because I already apreciate all the things and the hard work, you did for our RGH/JTAG xbox-es,  but maybe it would be a nice script addition too.  : )

Thank you! Phew, i was so worried it was something worse! : )

I have this on the picture - coolrunner REV D, with the label CORONA on it, flashed with jasper timing files. But If it starts xell every single time, from the first glich signal, I don't think point B is needed for my setup.. ?

I found that it is the point B on the CR, when I solder this point on the CR, the green light on the console don't turn on. With the others it boots. My connection to the motherboard is good on point B. Hmm... what could be... May be to inspect the CR traces from this point?

EDIT: Oh my...it glich to Xell first time without Point B connected??? Haha, what I need point B for? : D

EDIT2: http://team-xecuter.com/forums/threads/98645-RGH1-Jasper-BB-512-Booting-without-STBY_CLK-Connected , same thing with me, same chip, is it somehow prepared for CORONA and not need of STBY_CLK ? If it is, i am so happy and thank you again !!

Thank you, I will check the CR very closely now. It can be a bad flash to CR, you said? ( I hope the second one, because i can try much more things with the flasing ). Interesting thing is that if i start the consle with CR installed - no boot ( no green light on xbox ), but if I disconect the power supply in this moment and then connect it again, console shows green light. Nothing loads and CR not trying to glitch ( green light on CR  off , but red on ).

Thank you so much for the information ! Now i need help again. Everything is set up for RGH 1, the coolrunner chip is programmed for jasper. But when i connect it to the board - there is the only bright red light on the coolrunner. But when i start the console, nothing happens. No green light on the console. Console works fine without the coorunner  and with stock nand. Also it starts ( green light on the console ) with 3v3 line out of the coolrunner ( ofcourse it loads nothing ). The hacked .Ecc is ofcourse flashed with nandpro and +w64 command. What the problem could be?

I will try RGH 1.2 next,  to see if this will change something ( with Glich 2 .ecc ).

It is already banned, i will try RGH 1 again, first, which is compatible with 13..... dashboard. : )

Thank you so much, for the fast answers, my friends! This world need more people like you, who are ready to help others ! Really apreciate the support !

I will try now with a new coolrunner rev D chip, RGH 1 method. Trying to use good cables and best positioning. If not work, i will flash the needed retail nand and try RGH 1.2. By the way, I am not using the DVD drive ( it was on LT 2 hack ), so it is not important for me to be able to run DVD's with new games on it.

Also I have all the keys  ( CPU  , DVD )  and good original nand dumps from before ( only 4 bad blocks in not important positions, already remaped with j-runner, and console were working with them up to this day). And yes, the console starts with the original nand without problems.

Haha, true that, but I will try RGH 1 first. The story is, that the trace going from the alternative post_out point, to the CPU is cutted ( under the heatsink ), so the post_out pad will not work too. I know this trace is not need for a normal xbox, without any modification. So.. i will try to solder directly to the trace after the cut ( which going to the CPU ), instead of soldering both ends of the trace and then soldering to the ALT post_out point. Any suggestions here? : )

And one more question - what mostly is the problem, when I hear that vents pulsing in 5 sec, a.k.a. xbox trying to glitch, but there is black screen only, and there is only the middle green light on the xbox  ( the glicher is a coolrunner clone, so no leds on it ). The xbox works perfectly with stock nand.

Because the post_out + the alternative post_out points, used in rgh 1 , are a bit broken in this xbox  : P  .  And using a scratched trace for a soldering point is not that good at all.  : )

Yes, there are some differences in wiring and timing files too, but i need to be 100% sure, that rgh 1.2 method will not work on dashes before 14699. : )

As the topic said, can I use RGH 1.2 on phat Jasper 256MB BB, which is retail updated only to dash 13..... something ( then only with hacked images to this day, console's beeing RGH 1 hacked) ?

I know I can update the retail dash to newer and then use RGH 1.2, but I still prefer to be able to RGH 1 too. So can I use RGH 1.2 on this console, which is with older than 14699 dashboard?

Thank you!

Yes, the only way of stopping these hacking children is to kick them, out of our own rooms. : )

I like and laugh how hackers often join my game again, when i close the match, exit the room and make new one in another public room. What really they expect? They absolutely know that i will end the game again ASAP, so are they really that s.......d , to do it?  : )

How is the ftp ( via wi-fi ) speed, comapred to Aurora 5b, because FSD gives me better speed on the same task, like 2-3 MB/s more?

Try with overwriting the Aurora files, from a fresh Aurora instalation.

For Black Ops 2, be sure you are on TU18. Also the "can't join the game session.." writing happened to everybody, sometimes. It is normal. Just continue to try, or try to join another host/game. : )