Jump to content
RealModScene

Bazzz66

Members
 View Profile  See their activity

  • Content Count

    17

  • Joined

  • Last visited

Posts posted by Bazzz66

  7. Posted

    I've answered this same question so many times now :(

    ...There is a search on this site guys.

     

    open TU manager, Delete all TU's, go to your xbox system settings( in metro, not F3) and clear your cache, reboot the console, go back to TU Manager and download all available TU's for the game and activate the latest or in this case TU 6.

    Hi JPizzle,

     

    I followed your steps (again) but this solution fails for me.

    I did not clear the cache from my USB harddrive through the original xbox dashsettings.When I try to access the cache it states that my drive will be prepared and lose all date (can't have that, to many games)

    Was it the intent to only wipe cache on de internal HDD? Otherwise I will have to copy my external HDD and prepare it for xbox storage.

    Thank you for the patience.....

    Regards,

    Bas 

  8. Posted

    I have the persistent rank error, so I have only the TU6 (downloaded with FSD) on.

    TU6 is selected in FSD, I play BO2, create classes everything is ok (except that there are much less people in the rooms than before).I shut down my 360 or BO2, restart my 360 and BO2.....

    Link says TU version = 0Look into the TU manager on FSD, TU6 is highlighted (active)Have to disable and then enable the TU6 to get it working.

    When I have done this, all my settings are gone and must create the classes again :(

    Any ideas????

  10. Posted

    Same problem here.An error occurred while accessing persistent rank data (???)andI get the notification that there is something wrong with region compatibility, I double checked the gameregion and the TU region, all line up..

    When I apply the TU6, I am able to play. But before there were always 4 rooms full with people.Now there is max 1 room half full.

    Another problem is that BO2 does not store my self edited classes and scorestreaks.Everytime I have to edit the classes again.

    Very annoying this TU update.

  11. Posted

    Hi Guys,

    I have a problem, I could not get LINK to work on my XBOX (unable to connect), all settings are correct. Tests pass etc.

    As a last resort I tried to connect my xbox direct to my modem, and…….

    WORKS LIKE A CHARM

    (but no internet inhouse anymore when I play on LINK)

    So the problem is in my router.

    It tried several ports, placed the xbox’s IP in the DMZ.

    No luck at all.

    Had some advice to “bridge†the router or modem but my ISP can’t do anything about my modem and the router does not support “bridgingâ€

    Is there anyone with the same router as me who has LINK working through their DIR-655????

    Router specs:

    - D-Link DIR-655

    - Model A3

    TNX in advance

  12. Posted

    I don't know it any more....

    On dash 16202 (latest) , avatar works

    All tests pass, devlink off pingpatch on, dashlaunch 3.05

    TU shows ok in LINK menu during the game

    always unable to connect to game, sometimes I can host a game.

    Anyone any idea, it is getting really frustrating....

    I live in the Netherlands and I have a D-link DIR655 router.

    Is there anyone with the same router who has LINK working, maybe that is the problem (eventhough all tests pass)

    Other thing, when I join a room sometimes the controller icon turns yellow, somtimes it is white.

    What does that mean?

    • Like 1

  13. Posted

    Peoples if "Fatal Crases Inter......" update avatars !

    Quickly guide:

    1. Download same version of dash m$ with avatars

    2. Unpack to pendrive $$ystemupdate

    3. Run Dashlaunch 3.0x

    4. Update dash

    5. Avatars have update

    6. Play

    I have a grey avatar, maybe that is the problem that I can not connect in games

    Where can I find the correct dash, if I download from MS I got the SystemUpdate_16202_USB file.

    When I look in the dash of my xbox (Original dash under settings) I see dash version:

    - D: 2.0.14717.0

    - K: 2.0.14717.0

    Is it save to update with the sysupdate from MS, or am I missing something

    Thank you!!!!

    g

  14. Posted

    I passed all the LiNK tests, and i can see game sessions in system link in every game, but i can't join i get an error "couldn't join the game". if I create a game myself people can join me and play.

    I use Internet Sharing. My PC is wirelessely connected to the routher, and my RGH is connected to the PC with wire. I forwarded the ports and tests pass each time.

    What could be the problem ?

    I have exactly the same problem, people can join me (F1 2012) but I can't join others...

  15. Posted

    Hi Guys,

    First off all, Thanks FSD for the awesome work, the idea is great.

    My setup:

    Fiber connection: 60 mb/s up and down

    D-link router DIR-655

    Ports forwarded 3071, 3072 TCP and UDP

    FSD version 3.0.402 (obvious)

    RGH Kernel 14717

    Dashlaunch 3.04 (Devlink and PingPatch are enabled) (I read that ALL others have to be deactivated??)

    Avatar is grey??!! Did the updatespy (created a file and put it in the root of my usb, message: “system is up-to-date

    All tests pass with the “test†connection

    When in game I can see the rooms, people and myself.

    If I look on jqe360 site I can also identify the same users in the room.

    When I start System Link there the trouble starts, I can’t always see a game to join.

    But when I do see a game I am not able to join (F1 2012 / Gears of War 3 / MW3).

    Connection time-out or just the statement that no connection could be made.

    For each game I have downloaded the latest TU, if the game did not function I deleted the TU and re-dowloaded it. I aso tried each different TU. No effect. I did host a game (F1 2012), people could connect and I could race, so it works

    But I really like to be able to join games!!!

    Could be the beta stage…..

    Can someone help or point me in the right direction?

  16. Posted

    Hi Guys,

    First off all, Thanks FSD for the awesome work, the idea is great.

    My setup:

    Fiber connection: 60 mb/s up and down

    D-link router DIR-655

    Ports forwarded 3071, 3072 TCP and UDP

    FSD version 3.0.402 (obvious)

    RGH Kernel 14717

    Dashlaunch 3.04 (Devlink and PingPatch are enabled) (I read that ALL others have to be deactivated??)

    Avatar is grey??!! Did the updatespy (created a file and put it in the root of my usb, message: “system is up-to-date

    All tests pass with the “test†connection

    When in game I can see the rooms, people and myself.

    If I look on jqe360 site I can also identify the same users in the room.

    When I start System Link there the trouble starts, I can’t always see a game to join.

    But when I do see a game I am not able to join (F1 2012 / Gears of War 3 / MW3).

    Connection time-out or just the statement that no connection could be made.

    For each game I have downloaded the latest TU, if the game did not function I deleted the TU and re-dowloaded it. I aso tried each different TU. No effect. I did host a game (F1 2012), people could connect and I could race, so it works

    But I really like to be able to join games!!!

    Could be the beta stage…..

    Further, great work, again!!!

    Anyone who can point me in the right direction, I tried with different TU, no TU etc... !!!!

  17. Posted

    Hi Guys,

    First off all, Thanks FSD for the awesome work, the idea is great.

    My setup:

    Fiber connection: 60 mb/s up and down

    D-link router DIR-655

    Ports forwarded 3071, 3072 TCP and UDP

    FSD version 3.0.402 (obvious)

    RGH Kernel 14717

    Dashlaunch 3.04 (Devlink and PingPatch are enabled) (I read that ALL others have to be deactivated??)

    Avatar is grey??!! Did the updatespy (created a file and put it in the root of my usb, message: “system is up-to-date

    All tests pass with the “test†connection

    When in game I can see the rooms, people and myself.

    If I look on jqe360 site I can also identify the same users in the room.

    When I start System Link there the trouble starts, I can’t always see a game to join.

    But when I do see a game I am not able to join (F1 2012 / Gears of War 3 / MW3).

    Connection time-out or just the statement that no connection could be made.

    For each game I have downloaded the latest TU, if the game did not function I deleted the TU and re-dowloaded it. I aso tried each different TU. No effect. I did host a game (F1 2012), people could connect and I could race, so it works

    But I really like to be able to join games!!!

    Could be the beta stage…..

    Further, great work, again!!!

    Any ideas???

×
×
  • Create New...