vicicarus

Thank you very much for the reply,

YES!!! It worked. I had always updated, but never had to fall back. My Dash launch works now! Last time this happend it was a matter of just updating dash launch. Thank you again swizzy for all the help and assistance.

Thank you for any and all help provided,

 I got a 360 serviced(RGH) but it has 2.0.17489.0 dashboard which I think is not working properly with dash launch(3.15). If I extract my nand, can I downgrade it to a lower dash(2.0.17349.0) I am unable to open dash launch to set the aurora path and I rember running into a dashboard issue like this before.

Thank you very much for the reply,

 I haven't set the path for them yet, is what I meant. I just didn't have a full understanding of the filter system or that the emulators would require script data. I am still bouncing back and forth between Aurora and FSD3.

Thank you all for the help,

 I have a question. I haven't added my XBLA or emulator sections since I didn't see a XBL or emulator section in Aurora(Like in FSD3). If I under stand this correctly, if I add my XBLA and emulator sections, all I would have to do is set the filters on and off to display the different categories of games? A thousand apologize if I didn't explain this correctly.

Thank you team Phoenix fir your hard work to bring us a special experience to our gaming community.

Thank you so much for the posting location,

 Is using sqlitebrowser a straight forward process, or would I need knowledge on reading/writing script? I'm a little techie, but not knowledge in programming.

Thank you so muchj swizzy for your help,

 I will try it again and add to my game data. Were can I edit the game info/discription?

Thank you for the reply,

 But I still rename it to the corresponding title file,yes?

Thank you in advance for any and all help provided,

 I finaly switched over to Aurora becasuse FSD3 can't handle my game library. I was able to get game covers for all my games but no backgrounds nor game discriptions. I looked at the "how to" for "Aurora asset editor". I am able to switch to custom game covers, but when I try to drag and drop a game background I get and unreconized error in Aurora asset editor. I know I am selecting the correct file "BKTitleID" but I think I get the error because the file its blank. I didn't get the error when I drag and drop the cover file "GCTitleID" as it has a image in it. I am suppose to follow the method that is used to edit the game cover, am I right? I haven't found were to add the game discription yet either.

GCTitleID <--- Contains the Cover
GLTitleID <--- Contains the Icon & Banner
BKTitleID <--- Contains the Background
SSTitleID <--- Contains screenshots

Thank you for the reply,

I guess the easiest way would be to use a small size HDD and look in the “Cache†or under “title IDâ€. Just trying to figure out easiest way to do it.

Thank you in advance for any and all help provided,

 I was looking for a title update on xboxinity and for my game there wasn't one. What is the best method to extract title updates from my retail 360 so that I can upload to xboxunity for others to have a chance to use. I have a xbox slim(internal 4gb model) with an attached USB stick. I don't have an internal HDD in it but I can install one if the process needs it. And I also have/use horizon on my pc.

1: USB stick vs internal storage(4gb) vs internal HDD.

2: A good program to use to extract the TU.

3: The location/file structure for USB stick, internal(4gb) or the internal HDD.

Thousand apologize if I didn’t explain it smoothly. Just try to help others that may be looking for TU.

I found compatibility pack 2 so far. Do I need pack 1 or does it work like a title update, where as the most current should be used?

Thank you for the reply,

Yes system link is what I am trying to do. As for the compatibility packs, do you mean the in game maps?

I apologize swizzy for my quick response, I googled up "compatibility pack" and I see its not maps. I will install them and go from there.

Thank you in advance for any and all help provided,

 Is COD Ghost local multi-player play online only? Trying to start off line play, but can't. Keep getting notice.

Ok, I see what you mean. Nice, thank you for the update on Aurora, I will install to replace FSD3. Is there any recommendations as for setting for plugind or trainners? Or is it preety stright forward set up?

Thank you for the reply swizzy,

Really!!! Crazy, =P Has it really surpass FSD3?

Thank you for any and all help provided,

 I am installing XBLA box art that didnt come up when my system did a scan for art covers. I installed a new 2 TB HDD and problem is that the art is coming up to wide. I tried to edit it via photo shop, but it keeps coming up the same. What could be causing this? How can I delete specific covers to try and start over?

Also my system is freezing while it is in WEBUI mode for the installation of the cover art. Did not freez before and has not frozen durnig game paly?

On FSD3 3.0b Rev775 Dash 16747

Thank you so much for the reply,

 Bummer =/, was just being a bit lazy trying the "set it and forget it"  lol. Cool beans, I will go the copy manually route. Thank you again for the insight status.

Thank you for any and all help provided,

 So I have been trying to install FSD3 on to my system again via the install disk, but it doesnt run/connect anymore? Is there a newer version of the install disk I need to DL? Or could it be a network issue on my end? It worked in the past, but I havent tried it in some time.

update:

 So I was able to remove the "defalt.xex" from the internal HDD through xexmenu. I then re-installed FSD3, I setup dashlaunch and my 360 is booting like before.

I really want to say thank you to everyone for taking time to assisted with my E71 error issue.

One question because I am not to familiar with the text on the launch file. Can I just copy and paste default=usb:\path\to\xexmenu onto a txt file and have it work like that? Just asking because thefsd3 file had more txt on it. Or should I use the template from FSD3?

I sent you a copy of the nand file. I didn't see any bad blocks.

Thank you all for the help with this issue.

Swizzy mention that the problem was a "default.xex" on the root of the hdd. I swapped the HDD with another and it boots!!!!! everytime it boots!. Base on this finding that swizzy pointed out, can it still be the "default.xex" on the root of my HDD? I will look for simple 360 NAND flasher 1.4b to dump my nand. I can asume that during the dump I will need to see it the nand has bad blocks? Is that correct?

Thank you all for the replies,

 Ok, I will try both methods out to see which one works best for me and will post my results. If I may ask, how do I run horizon on admin mode?

Thank you for the reply,

 I wasnt aware that it would read the large HDD. I use horizon only for my 16gb flash drive. Does it read all the partions on the HDD?