GoJohnny

I switched up nr. 3, and it started emidiatly, so thanks a lot for that. Only now i have a new problem, in Jrunner i trie to create xbuild image, but i can not select my dash version, even after adding it, it only says create dash and delete dash. Could you please help me out on this again.

Oké, thanks again, i'll get on with it tomorrow, and will let you know if it works. Have a good evening, bye.

Thanks for all the tips, i'm gonna experiment wit those. Maybe a stupid question, but while i have a Flacon, in the JRunner log i found it says; patching jasper version 2.3 smc at offset 0x12ba. Is this normal, or maybe some wrong settings in J-Runner. Thanks in advance.

sorry for being a noob to this, but where do i find this post log?

Products used: JRunner, CR4, Phat QSB kit Console type: Falcon Nand size: where do i find this? Dashboard : 16747 CB Version: 5774 JRunner log: screenshots attached And other images of soldering etc. Description of problem: I soldered everything like shown on attached pictures, on J-Runner had 2 nand reads, turned audclamp and R-Jtag on, created Xell, and then wrote Xell. But now when i trie to start the console, using the eject button, it doesn't boot in to Xell. Console was working before i started On the CR4 led1 is burning red, and led 2 (debug) is blinking every 4-5 seconds The light is on for about 1 second

oke well, thanks for helping this far anyway

the latest one i got working is TU12 , 13 and 14 give problems with the multiplayer option. Now i've been reading a lot abouth it, seems i need compatability pack 2 (could this be the solution for my problem?) If so, do you know where i could find this pack? Been Googling for abouth an hour (also on dutplanet, spotweb and so on), but can't find it anywhere. (only a borderlands pack) thanks again

Thanks for the idea Swizzy, i tried running 'vanilla game', but unfortunatly this didn't work out either. Would almost think it's a game issue, if it wasn't for the fact that for a short moment it did work out before. I really have no idea of wat happened, because i did not change anything. A copple of days ago i tried a really cheap headset at first, and for a really short moment we could hear eachother playing Ghosts, but then suddenly it did not work anymore. So i bought the Original XBOX360 bleutooth headset, hoping this would work out better, but like a said, it workes out fine with BO2 , but does not work with Ghosts at all. Thanks for helping out on this, i really appreciate it.

i'm using the Original headset Swizzy, and i also tried using it in a local game, both with black ops 2 and Ghost. In BO2 the headset is working but in Ghost it still isn't. could it have sommething to do with the TU i'm in? No, i'm sure i have fakelive enabled in dashlaunch Suprashake. And i was playing with my brother in law, who was also using a headset, when we played in BO2 the headset worked out fine, but when we switched to Ghost it did not work anymore.

thanks for replying Swizzy, how can i find out whether a game supports a headset or not? thanks for replying Suprashake, but i already have fakelive turned on in dashlaunch.

I recently bought a xbox 360 bleutooth headset which i use through system link. Now when i use the headset with the game COD black ops 2 everything works out fine, but when i try to use it with COD Ghosts it doesn't work at all. Does somebody have any idee on how this is possible??

Never mind, i already found it, thank you verry much for helping me out on this.

thank you verry much for answering my question, i already thought it had to be something like that, but i have no clue of how to do this. could you please explain this to me, in simple english. (our Dutch if you could) thanks in advance.

After updating dashlaunch from v3.11 tot 3.12, and updating the kernel to version 16747 (using xebuild 1.12) fsd 3 is not booting anymore. Instead the xbox360 is starting in NXE, so i could not get into FSD using my PC. After this i placed a ISO of XexMenu on a cd and started it in XNE, then i went to the 'installer', which i had placed into the 'emulators' map in FSD, and i loaded and started "default.xex". Now FSD3 started and everything seemed to be working fine. Using the large button on my controller i was able to restart in FSD3 aswell. But when i turn off the xbox, and then start it again, the xbox starts with XNE again. Please help, i don't know what to do anymore, excuse my poor English and being a noob to this.

already solved the problem, thanks

Hey, i followed this tutorial, and everything worked out fine, i have tested LINK, and everything passed ok. But the problem is, when i open the mini menu, there is no SYSTEM LINK option. I am working on the latest version, and have installed all the possible updates, does anybody know what could be wrong. I hope you can help me out

i already solved the problem; after typing the command xebuild update -f 16537 just enter -ip followed by the ip adress of your xbox, and all goes well.

excuse me for my poor english and beiing a noob to all of this, but i have the following problem; i have used this tutorial and its downloads twice, and it worked verry well, but today i tried using it again for the xbox of my brotherinlaw and now i got a problem. i have connected the xbox to my network and i was aible to see and open files on the connected xbox, so I moved the installer folder to the xbox and run the program as usual, but as soon as i started up dashlaunch for the seccond time i lost the connection between pc and xbox and i was not aible to run xebuild 1.08, when i typed in the command xebuild update -f 16537 it responds that it was not aible to find a xbox connection. i really hope someone can help me with this problem

Thanks for the advice, that worked out great.

Oké, thanks for responding, but what does it mean, that it is libXenon based?

i have just installed freestyle 3, and everything is working fine, xbox 360 games are showing and playing. only problem i'm having is that i can't get the emulators to work, i would just love to play that nintendo 64 games on my 360. could anyone please tel me how to work with emulators or a link to a tutorial, thanks. On my HDD1 i created a folder named roms and stored the N64 emulator and the games in there, after that, in content setiing i created the game path to that folder and set the scan depth to 2, now what did i do wrong?