tomharper 0 Posted June 21, 2017 Hiya I don't know what is wrong is it in my soldering or Xbox when I soldered the tx nand reading attachment and I plug it in my PC it shows 2 us but doesn't ask to format it or anything the USB is hidden and in jrunner it shows failed to get disk geometry and when I try to write a nand it shows in jrunner it shows must be a removable drive Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted June 21, 2017 Pictures would be helpful. That being said, not all card readers work with the Xbox. 1 Quote Share this post Link to post Share on other sites
tomharper 0 Posted June 21, 2017 Ok I will upload pictures and I have a Corona 48mb nand Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted June 22, 2017 If you can't figure it out by looking at the pictures, then you need glasses. That being said, you only soldered half the required connections on the nand read board. Lol.:) Quote Share this post Link to post Share on other sites