jack 0 Posted October 6, 2013 Bad blocks @ 2, 12 and 43 Can someone please try to create a working nand so i could boot xell? I have allready tryd so many things but i just can not get xell to show up. With AutoGG built image console glitches succesfully but i get no output. No IP, TV or com output. If i try to do everything manually i do not even have that much luck. Any ideas? Nand. http://www.upload.ee/files/3624313/nanddump1.bin.html Quote Share this post Link to post Share on other sites
jack 0 Posted October 6, 2013 Ok topic can be closed. FINALLY i managed to build a working nand. For huture referance this is how i had success 1: from original nand make a version with no bad blocks. So it goes something like this: red blocks 3ff, 3fe and 3fdblock 2 was at block 3ff, block 12 was at 3fe, block 43 was at 3fd. 2: Wrote those 3 blocks to their real locatsion @ 2, 12 and 43. Erased mapped blocks from 3fd-3ff 3: Initialized nand in AutoGG and creataed a ECC image that i saved. 4: Red blocks 2, 12, 43 from the created ecc 5: Wrote created ecc onto the "no bad block" nand. 6: erased blocks 2, 12, 43 from the newly created andn with ecc. 7: wrote the 3 blocks 2, 12 and 43 (that i red from ecc image created by autogg) block 2 @ 3ff, block 12 @ 3fe and block 43@3fd. 8: Wrote the final image with nandpro Got into xell and now everything from there on was a breeze. As for jrunner, that program was of no use AT ALL. Anyway... /thread Quote Share this post Link to post Share on other sites