Jump to content
RealModScene

IRAQ_LION

Members
  • Content Count

    7
  • Joined

  • Last visited

Posts posted by IRAQ_LION


  1. اعتذر منك ما اكدر اتوصل وياك غير عن طريق الموقع بس مثل ماكلتلك شو٠الÙديو وطبق الخطوات 100%

    والله جربته الÙيديو

    يمعود هوه الي بالÙيديو صور وديكلبهن علينه

    المهم الÙيديو ماÙاد يمي لان مدري شلونه مخربط والخطوات مو صحيحة


  2. Here's my BT Home Hub:

    Posted Image

    If I put the port number under TRIGGER Port it doesnt work, so must be left blank. (took me ages to find that out!)

    Also try putting them in individually like I did instead of ALL (tcp /udp)

    On this hub you set the ports up like this and give it an application name (I called it iLiNK) then assign it to an IP or device on the configuration page.

    first i can't name it cuz my router dosent have  an option for name the application

    see this pic for more info 

    Posted Image

    and this pic also showing the ports after edit it as your ports 

    take a look! is this right ? and the ip showing below "192.168.4.101" is the XBOX's ip

    Posted Image


  3. اها قصدك دتكول Ùكرة جديدة

    اي عاتي المهم

    ماكو حل لمشكلة البورتات جربت هذا الشرح الي بالÙيديو Ù†Ùس الشي الداينمك اي بي مالتي الي بالراوتر دايضل صÙارة

    ميتحول ارقام

    ممكن الرد


  4. Hello 

    i have this issue when i want to try test ports on FSD

    look at this pic http://s22.postimg.org/v8wiql0gx/20130708_183338.jpg

    and this pic show how i setup the ports on my TP-LINK 

    Model No. TL-WR841N / TL-WR841ND

    http://s21.postimg.org/r8duacb5j/000000000000000000.png

    i try many ports like this 3071-3072 , 1001-1003, 1-62222, all this fail

    JQE : Pass

    UPNP : Enable and i aslo can see rooms on LiNK when i enter the game but i can't join the game cuz its not showing is systemlink of the game

    also i try to put the ports on Virtual Servers and nothing works ! this pic also showing that the xbox connected to the router

    http://s16.postimg.org/6t6h6nsfp/989898.png

    any idea ??? 


  5. hello everyone

    i was trying to test my ports on FSD put it always says "Fail" on Status Port and Broadcast Port

    i have a TP-LINK Model No. TL-WR841N / TL-WR841ND

    this pic show how i set port forwarding in router

    Posted Image

    But when i test is on XBOX through FSD its says like this pic below

    i try many differnt PORTS like this 1001-1003 , 1-62222 , and many things 

    JQE is Pass and UPNP is enable !!!!

    what is the problem ?

    any help ?

     

     

     

    Posted Image

×
×
  • Create New...