rigbyscamaro89
-
Content Count
16 -
Joined
-
Last visited
Posts posted by rigbyscamaro89
-
-
Since TX servers are down from what i can tell, I recently deleted jrunner and redownloaded to start over new but now i get the script error at launch. The update box is checked in settings. So im looking for alternatives to do some rgh work I had read into a similar problem here and was directed to Swizzy signature explaining xebuild gui. I have never used it befor but it doesnt look to complicated with his guide. I am assuming that you would use the same guide for a fresh build, however I did not see a sction about programing the glitch chip with xebuild gui. Am i missing something or is that another tutorial or not possible....??? Any help or point ing the right direction would be greatly appreciated.
- 1
-
I have only read horror storys about zephyrs. The last zephyr i did was with CR4 chip, for a customer, and right after I got it to sort of boot consistantly the console died. got RROD 0022, and since I dont have the reball/reflow equipment, there was nothing I could do about it. I should mention it was a repair console, and I told the customer, just because of that and the fact it was a zephyr, it was probably going to happen sooner or later. I was hoping to get it out the door before it did though. I dont really care, as I still got payed, cause I told him it would probably happen, and after it did, he still insisted I install a demon. He clamed to have a friend who could reball, but who knows if he ever did.
To the OP.
I think you would have better luck finding a cr4. RGH2+ will work on an rgh1 based console with no updates required, and has less wires to install. Boot times in my experience have been close to instant, if propperly configured. Unfortunatly, all of the stuff is getting harder to find, as credit card companys are dropping account with retailers telling them they are selling illegal hardware.
Price always play a factor inprofit though and cr3 is cheaper than cr4 plyus all my consoles i think except one are gonna be rgh1. question for ya, Is it easier to do rgh2 on zephyr or rgh1 as I have heard mixed comments and dont have alot of experience with rgh. I was always a firmware modder but them dics got xpensive.
-
shitty part is most of my consoles are zephyrs, i do happen to have a jasper and a falcon though as well and those will prob be my target consoles although i need the zephyrs to glitch for dvd keys though.
-
you can flat rate it for about 12.80 with tracking if in the US
-
looking for some cr3 chips if anyone has some laying around and willing to sell. I would like official products only no clones and prefer in the United States for shipping. Thanks guys lemme know what you got. ALSO if anyone know where I can still get these chips besides Modsupplier. please direct me that way.
- 6
-
understandable risk that i accepted with the clone. probrably not the best decision for first rgh but at the time i was broke. chip looks decent quality only thing that looks off besides the missing emblems is how the jumpers are done.
-
Saturday, February 21, 2015 1:27:35 AM
J-Runner v0.3 Beta (7) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Downloaded *xeBuild/9199/su20076000_00000000
Downloaded *xeBuild/9199/_jtag.ini
Finished Checking Files
Version: 01
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 4578
Zephyr
Reading Nand to C:\Users\Gixxxer\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\nanddump1.bin
Reading Nand
Done!
in 3:25 min:sec
Reading Nand to C:\Users\Gixxxer\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\nanddump2.bin
Initializing nanddump1.bin..
Header is wrong..
Zephyr
Glitch Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:25 min:sec
Comparing...
Nands are the same
Programming Coolrunner
C:\Users\Gixxxer\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\common\xsvf\zephyr.xsvf
USB XSVF Player Initialized
Xilinx XC2C64A-VQ44 ......... [DETECTED]
Erase Succeeded
File: C:\Users\Gixxxer\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\common\xsvf\zephyr.xsvf
Sending Out Packets .........
Success
Header is wrong..
Invalid Image
Failed to create ecc image
-
should be rgh 1 dash was in the 9xxx if i remember correctly.
i have kept a dump of the original nand that i dumped after picking this console back up to work on it again. however with that same nand i was unable to create ecc or boot to xell. I tried multiple times, resoldered ,nor was not receiving any weird flash config codes. From everythign i had read this lead me to believe i had overwritten my nand physically thats why i started searching for donor. I have overwritten my nand at least once with a donor however it didnt boot to xell so i reflashed back to the frst nand.
gimme a sec and i will rerun the whole rgh start process and post my jrunner
-
i dont have a key. long story short this was my first attempt at rgh. backups was on a different computer, house burned down computer long with it. I had a nand dump saved but it would not write ecc. so i guessing nand dump was an over written file since i was never given option to overwrite. Therefor i ended up here trying to use a donor. Also just a heads up i am using a clone chip . If you need pics i will send them.
-
any idea where i can find what i am missing by chance. im seriously bout to scrap this console.
-
fcrt.bin was not in .rar could that affect it?
-
followed tutorial and this came up..?? not sure what i am doing wrong.
Saturday, February 21, 2015 12:13:36 AM
J-Runner v0.3 Beta (7) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Version v0.3 Beta (7) is available for download.
Checking Files
Finished Checking Files
Downloaded *xeBuild/12611/_jtag.ini
Finished Checking Files
Downloaded *xeBuild/12625/_jtag.ini
Finished Checking Files
Downloaded *xeBuild/9199/_jtag.ini
Finished Checking Files
Zephyr Manually Selected
CpuKey is Correct
Load Files Initiliazation Finished
14699
Couldn't add dashlaunch patches to D:\Documents and Settings\Gixxxer\Desktop\JRunner\xeBuild\14699\_glitch2.ini
Couldn't add dashlaunch patches to D:\Documents and Settings\Gixxxer\Desktop\JRunner\xeBuild\14699\_glitch2m.ini
Started Creation of the 14699 xebuild image
---------------------------------------------------------------
xeBuild v1.14.693
---------------------------------------------------------------
base path changed to D:\Documents and Settings\Gixxxer\Desktop\JRunner\xeBuild
---- { Image Build Mode } ----
building retail image
**** could not read cb.4571.bin (-1) ****
******* ERROR: critical bootloader files are missing, cannot proceed!
***** FATAL BUILD ERROR: -1 unable to complete NAND image
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Failed
CpuKey is Correct
Load Files Initiliazation Finished
14699
Couldn't add dashlaunch patches to D:\Documents and Settings\Gixxxer\Desktop\JRunner\xeBuild\14699\_glitch2.ini
Couldn't add dashlaunch patches to D:\Documents and Settings\Gixxxer\Desktop\JRunner\xeBuild\14699\_glitch2m.ini
Started Creation of the 14699 xebuild image
---------------------------------------------------------------
xeBuild v1.14.693
---------------------------------------------------------------
base path changed to D:\Documents and Settings\Gixxxer\Desktop\JRunner\xeBuild
---- { Image Build Mode } ----
building retail image
**** could not read cb.4571.bin (-1) ****
******* ERROR: critical bootloader files are missing, cannot proceed!
***** FATAL BUILD ERROR: -1 unable to complete NAND image
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Failed
Since Jrunner is no longer supported??!!
in XeBuild & XeBuild GUI
Posted
thankyou for your uploads its much appreciated. for some reason im still gettign the script error..... checked and reinstalled net framework to 4.2 i think it was and enable file checks is checked in settings.
http://54.200.34.14/?nxdomain=http%3A%2F%2Fapp.jrunner.xecuter.com%2FJRunner%2Fadvertisement%2Fad.html&msgID1=13&AddInType=2&PlatformInfo=DNSA&Version
this is where its trying to connect to i believe so Im guessing that means servers are down or its no loinger supported?