Jump to content
RealModScene

Areeb Ashar

Members
 View Profile  See their activity

  • Content Count

    34

  • Joined

  • Last visited

Posts posted by Areeb Ashar

  6. Posted

    Hi!

     

    I've got new xbox 360 e 250GB jtag v4 for only 2 weeks and today this happened. Tried to start the xbox, solid red light is on (light on power supply orange). Disconected everything, reconnected. Xbox started for few second, green light changed from green to red and that's it.

     

    I called technical support and they said to disconnect and reconnect everything, if it doesn't work bring the xbox to the shop. I will probably do this in any case, but just wanted if there anything else I can do (try)? What could be the cause?

     

    Thanks for help!

     

    Hey there! 

     

    I've had the same problem with my Xbox 360 E Jtag Console, and when I would turn it on, the Power Light would briefly come on green, and switch to red. After several diagnostics and analysis, I found the solution to this problem! Okay, so o get this under control, follow the following! Keep in mind that this problem is not with your Xbox, but the power supply. In my case, the problem occurred to me when I accidentally plugged my console into a higher voltage plug that recommended, but nothing serious happened, so no replacing! Try my method out though!

     

    Okay So, lets start:

    1) Turn off Console (in the case of it being on) and disconnect ALL wires from the console. So the Kinect sensor, the power cable, HDMi or AVI cable, any USB's. Then place the console to the side. nothing should be attached to the console at this point. Your console's back side should be like this:

    xbox360e_teardown_01.jpg

    2) Now to the power brick. The power brick is the big black box thing in which the wire from the plug goes to. Unplug that and let it sit there for a while or so. So that side of the power brick should be looking like this: 

    $_57.JPG

    3) Now after letting it sit there unplugged for a while (5-10 minutes min), re-plug all the wires back into the console, and make sure to attache the power brick wires last!

    4) ENJOY!!!

    NOTE: If the same thing happens again, this time just remove the main wire from the plug (will shutdown everything attached to console, and console itself), and let it sit for another 10 minutes. After a few times, it will stop happening! keep in mind this worked for me! Worth a try!

  7. Posted

    Just what the title reads...

    How do I change what I hear in the Headset for the Xbox 360? Like I have a modded console, I believe it's a JTag, and I want to hear the music I play through the headset, not the TV speakers. Please help me out! I'd greatly appreciate if I got like a tutorial, or step by step instructions. 

    Thankz before hand!

×
×
  • Create New...