BioHazard

I'm not sure what it is but the end result needs to be English.

Can we get someone in here to translate this please?
 

Let's try to keep the idea of reporting a post to actually making sense....

 

Thank's for application

 

Congratulations and good luck for this great app

not point to the IP address

And an option to reset data - (force to remove and reinstall the application)

Sorry for my english

 

Google translation is my friend

 

In order to reset enter 1.3.3.7 as the ip address.  It will remove everything except the info from the homescreen.

It's a false positiv... scan at virustotal.com show's 1/47 as Trojan...

Glad to see your defending that what about addressing the concerns of everyone who has downloaded it so far?  There appears to be no one who has this working and the screenshots do not describe to the end user what this is.

If it was done a year ago odds are he wont have x8 installed.

 Make sure you have avatars installed as this is critical to multiplayer in Black Ops 2.  Maybe its a missing map you don't have?  Have you tried any other games?

Source code is not needed to localize F3.  

I vote no... Not that it matters xD

Try wired internet vs wifi. If your doing Wired, try wifi. If your doing Wifi try Wired.

Is it strange that the calibration value keeps getting reset to 11? Every time I change it, it gets set back to 11. I know the changes I make are getting committed If I change the delay value, it sticks. It works mind you, It just won't stay at zero.

The app has no code in it to save any settings to the ini file. I would say your changes are not getting saved to the console. Save the changes by whatever method you use FTP, USB etc and then reopen the file and verify they are changed.

Restart your console and try again. Most likely a handle is open that is using that file. Someone else has suggested it could be a bad drive. If you already restarted install ftpdll.xex and boot to dashlaunch or a game besides FS3 and try deleting it using ftpdll.

für das Mutterland!

a total noob here: i did not do the rgh stuff myself, and i dont have money to pay to the same person again, if i backup the bootanim.xex and/or just rename it, can it be reused later if i ever decide to deactivate fakeanim?

I had a hard time reliably placing files back onto the flash after they were removed. I am not a fan of software flashing so I this is why I recommend having a hardware flasher to backup and restore your NAND.

Oh, I missed something...

Maybe I have not well understood "to restore to a previous nand dump via hardware"...

Does it means that I need a LPT or an USB tool such as x-nand-dumper to write my nand ?

And could you tell me why it doesn't work via software ?

But if I have to do it via hardware, I can !

Thanks for your answers,

Spideraider

I'm not a fan of using software to write the nand. It works and there is no reason it wouldn't work but if it messes up you'll be left with a console that doesn't work. Until you can get a hardware flasher. Your bad block imho is unrelated and may have been there when the console was hacked originally. My suggestions are to dump your nand and use j-runner to recreate it. Then flash that image onto the console.

---------------------------------------------------| FakeAnim v0.60b |---------------------------------------------------

Overview: This release will allow for fake animations in the form of WMV 9 encoded videos to be played on the console prior to showing the dashboard. Since this file is only loaded after the console is ready there will be a minor increase in boot times. This has no impact on glitch times since the glitch occurs prior to this file ever being loaded. The Delay and Calibration settings are designed to allow the user to tweak the video to their specific system and display. This tweaking makes it so that the video does not get cut off. Please read below for a full set of instructions:

Intallation & Configuration:

Important: Do NOT attempt to delete bootanim.xex if you are unable to restore to a previous NAND dump via hardware.

Requirements: DashLaunch v3.03 is required for this to work.

Installation:

• Copy over all files in the archive to the HDD or USB of the 360.
  
• Edit your launch.ini to have fakeanim = point to the fakeanim.xex
  
• Reboot the console and make sure the application runs. Ignore the Red Screen being present for a while.
  
• Once you have verified the application is launched remove bootanim.xex** from the consoles Flash. (Use FS3 or FTP).
  
• Reboot the console and pay attention to how long the red screen is displayed.
  
• Calibration takes place in the fakeanim.ini file and should be checked with a cold boot in order to force the GPU to initialize.
  
• Once calibration is complete edit the fakeanim.ini and set calibration to 0

Calibration Notes:

• To adjust the length the red screen is shown. Add to the number to increase the time take delay. Take away to decrease it.
• The delay function is used to ensure the video does not get cut off during the monitor and GPU starting each "delay" is 250ms. Valid entries are between 0 and 100.
• For slims start around 5.
• For Phats start around 13.
• The goal is to get the red screen to show for the least amount of time possible on the Evil Laugh wmv when performing a cold boot.

# #
# #
# #
## ##
## ##
## ##
## ##
### ########### ###
#####################
##### #####
######## ########
### ############# ###
######### ####### #########
############## ##############
## ######## ######## ##
## ### #### #### ### ##
# ### #### #### ### #
### #### #### ###
# #### ### ### #### #
#### ### ### ####
######## ########
###############
###########
#########
### ###
### ###
### ###
### ###
######## ########
fakeanim_v0.60b

--------------------------------------------------------------
#### Overview: ####
--------------------------------------------------------------
# #
# This is a replacement bootanimation for freeboot consoles #
# In order for this to replace the bootanimation a few #
# requirements must first be met. The console must be #
# running the newest dashlaunch version 3.03. The original #
# bootanim.xex needs to be deleted from the console's Flash. #
# Do not attempt this if you are unable to restore to a #
# previous NAND dump via hardware. This is provided free and #
# without warranty. Please see the readme.txt for detailed #
# installation instructions. #
# #
--------------------------------------------------------------
#### Distinguished Gentlemen Award: ####
--------------------------------------------------------------
# #
# cOz thank you for all the help you have provided on this #
# this. Without the amount of time you have spent on #
# dashlaunch many of the features we have all come to love #
# would not exist. #
# #
--------------------------------------------------------------
#### The following entities made this possible: ####
--------------------------------------------------------------
# #
# BioHazard, cOz, MaesterRo #
# #
--------------------------------------------------------------
#### Thanks to the following people & teams: ####
--------------------------------------------------------------
# #
# J2G, jsinger47, Juvenal, JPizzle, JQE, RF1911, Mattie, #
# stefanou, Spudnutz, TraJiK, tydye81, Team-Xecuter, TeamFSD #
# #
--------------------------------------------------------------