GoJohnny

Oh boy, you must think i'm pretty stupid right now, but it's just all new to me, doing this for the first time. So i assume that at the place of the black Arrow there has to be a diode? Like in the middle of the yellow wire? Does there also need to be one at the place of the white Arrow (red wire)? And what kind of diodes do i need?

sorry, forgot pictures

used the diagram (see pics), but unfortunatly the same problem. maybe i missed something?

oke, thanks a lot for explaining, so i just have to connect a red, blue and yellow wire to the points as shown, and this is also correct setting for aud_clamp?

Yes,you showed me that diagram before, and you are being really helpfull so far, but like i told you, with that diagram i really don't understand of what to do right now. I'm not being lazy, i just really don't understand. Like i showed you in a post above this one, i have Connected a CR4XL to a QSB on top of the motherboard, and some wiring to the bottom. Could you please, please explain to me if i can leave all that connections as they are, and then make the extra connections as shown on the diagram, or do i also have to change other wiring?

Oké, i removed the QSB (see pics). But what i actually need to know, is what connections do i have to make right know, what do i need to solder? Again i apologize being a noob to this, but i really hope i still can get it to work.

I hope you can bear with me a little longer Swizzy, cause i don't understand the diagram. Under here are the connections i made on my Falcon Xbox, could you please tell me what to change? I would really appreciate it. CR4XL: above GND: red wire Connected to 5V (jrp nandx cr qsb v3) GND: black wire Connected to metal C: yellow wire Connected to FT6U1 M: blue wire Connected to 2e above C7R112 A: white wire Connected to the right of R7R9 B: grey wire Connected to B (jrp nandx cr qsb v3) Q2N1: green wire Connected to jtag alt v2 qsb (long leg, left from bridge 1-3 for alt clamp)

Googled it, but getting so many hits, and even so many possibilities. Not sure what you mean, i now have the jtag alt v2 QSB connected to q2n1. Do you mean to remove the QSB? Where exactly do i have to connect q2n1 to? Sorry for being such a noob.

So Swizzy, you think that if the resistor on the QSB is dammaged it could cause the problem with the RF board, because of being connected to that other resistor? Could you explain to me how to replace the QSB with the diodes and bridge like you just said? By the way, i really apreciate al the help you and gavin-darkglider provide to me, thanks a lot.

I do have to remove the RF Board to get the console started gavin_darkglider. I push the power button, and then remove the RF to get it to boot. How can i make sure the resistor is dammaged, can i fix it if it is, or better replace the QSB?

You mean i have to buy a new one. or could it be fixed? It was working properly before the J-Tag. I found out that on one of the QSB's some part is bend a litle, could this have something to do with it (see picture)

Sorry, my mistake, i used capitals, and that seemed to be wrong. Thanks a lot for all the help so far, but unfortunatly its not working like it should. When i push the power button at the front of the Xbox, nothing happens, or it freeses at the xbox logo, but when i first push the power button, and then remove the small circuit board with the power button , it boots imediatly. (or sometimes after replacing the circuit board) Do you have any idea of what could be wrong?

When i try to create the image, it says, that its a clean bin, and for J-Tag it needs a hacked bin. Is something wrong with the bin, our do i need to do something else?

Okay, great, thanks again for explaining, i'm gonna try this first thing tomorrow morning. Hope it works, i will let you know.

This indeed looks just like the issue i'm having, so i downloaded the profided smc_falcon_norst.bin file. Only thing is i have no idea how to swap SMC with the profided file.

yes, they are Connected, it doesn't show on the pictures, but the JRunner is Connected through 2 cables wit a blue, white and i believe green plug you can see a part of this on the first pictures i posted.

sorry, i just followed an online tut, what cables do you mean?

I checked them all, but could not find anything wrong, so i made some close-up pictures. Maybe you could take a look at them to see if something is wrong? I was able to write te xel reloaded by the way, our does that not hav anything to do with it?

I created anotrher xebuild image, and then tried to write the nand, but J-Runner says flash config: 0x00000000 can not continue. Actually the same thing happened last time, and then i copied the updflas.bin to a usb stick and then flashed it to the xbox. (probably that was wrong also?)

Okay, how do i do that, just read the nand with j runner, and see what it says, or do i have to do something more?

Yes, i know i can combine them, i combined switch 7 up, with 1 to 6 up. I waited for abouth 5 minutes, but the strange thing is that with combination 7-3 at one moment the xbox started and even the logo apeared, but latr on with the same combination the xbox didn't even start. So to me it looks like a problem with the xbox not starting all the time. Only thing is, i don't know what to do abouth it, hope you can help?

i have tried all the different switches; with switch 2 up, the xbox started, but didn't glitch, with switch 3 up, the xbox started, and the xbox logo appeared to the screen (only the logo). With all the other switches nothing happened, the xbox didn't start. But when i later tried switch 2 and 3 again, the xbox didn't start anymore.

it's really strange, for a minute ago it suddenly started, but only the xbox logo apeared, and nothing else happened. So is turned it back off, and tried to start it again, and now it won't start up again.

Sorry, my mistake, i forgot i had to power off the xbox first. I've created the image right now, and flashed it to the xbox. Only thing is, when i trie to boot, nothing is happening, the xbox is not starting up at all. Do you have any suggestions of what could be wrong????

yes i understand, but i have dash 16747, and i added 16767, but still i can not sellect this version when i want to create xebuild image