Jump to content
RealModScene

Recommended Posts

I was recently playing my rgh xbox360 slim, it was connected with an ethernet cable to the LAN. When I clicked aurora home, it rebooted and went into the normal (outdated retail) dash and said something about updating the xbox has failed. Eject button isn't working at all therefore can't boot into xell. When I boot normally it sometimes goes to the dash and sometimes red ring with some error number, a few times it even booted into aurora and then immediately rebooted. The device doesn't seem to recognize the hard drive, I tried putting my hard drive in another xbox an it did recignize it. I have no backup of the nand dump.

Is it possible to fix this?

Thanks in advance.

Share this post


Link to post
Share on other sites
1 hour ago, r987_ said:

I was recently playing my rgh xbox360 slim, it was connected with an ethernet cable to the LAN. When I clicked aurora home, it rebooted and went into the normal (outdated retail) dash and said something about updating the xbox has failed. Eject button isn't working at all therefore can't boot into xell. When I boot normally it sometimes goes to the dash and sometimes red ring with some error number, a few times it even booted into aurora and then immediately rebooted. The device doesn't seem to recognize the hard drive, I tried putting my hard drive in another xbox an it did recignize it. I have no backup of the nand dump.

Is it possible to fix this?

Thanks in advance.

Without the code it's hard to say, but it can be a problem on your hard drive or chip rgh.

Share this post


Link to post
Share on other sites

@Neocazen When I put my hard drive into anoter rgh console it did work (the console could read the drive), however, on my console, it just doesn't show up when viewing the memory devices (it says that there are no devices at all).

Without what code??

By chip, do you mean nand?

Share this post


Link to post
Share on other sites
6 hours ago, r987_ said:

@Neocazen When I put my hard drive into anoter rgh console it did work (the console could read the drive), however, on my console, it just doesn't show up when viewing the memory devices (it says that there are no devices at all).

Without what code??

By chip, do you mean nand?

When a red light error occurs. You should hold down the sync button and click on the eject but yours has problem so it will be more complicated. Will have to get another front with working eject.
       On youtube there are tutorials for that
Download a version of aurora for flash drive take the hd that has aurora and try to see if it can be him
No. The chip that unlocks it. Run360, Ace, Matrix...etc

Share this post


Link to post
Share on other sites
4 minutes ago, Neocazen said:

When a red light error occurs. You should hold down the sync button and click on the eject but yours has problem so it will be more complicated. Will have to get another front with working eject.
       On youtube there are tutorials for that
Download a version of aurora for flash drive take the hd that has aurora and try to see if it can be him
No. The chip that unlocks it. Run360, Ace, Matrix...etc

@Neocazen Will try that later and update.. Thanks!

Share this post


Link to post
Share on other sites
On 8/27/2019 at 1:11 AM, Neocazen said:

When a red light error occurs. You should hold down the sync button and click on the eject but yours has problem so it will be more complicated. Will have to get another front with working eject.
       On youtube there are tutorials for that
Download a version of aurora for flash drive take the hd that has aurora and try to see if it can be him
No. The chip that unlocks it. Run360, Ace, Matrix...etc

I tried putting Aurora on a usb and plug it in however, when I format the usb to be compatable with the xbox it doesn't format with the usual Content folder but with an xbox360 folder, when I put anything on the root of the usb or inside the xbox360 folder the xbox doesn't see it, when I am trying to see what's inside the usb it shows me the retial xbox browser, that is PROBABLY also why my hard drive doesn't show up, because it is formated in the rgh way with the Content folder.

@Neocazen I think that it is either the glitch chip or the nand, what do you think?

Share this post


Link to post
Share on other sites
1 hour ago, r987_ said:

I tried putting Aurora on a usb and plug it in however, when I format the usb to be compatable with the xbox it doesn't format with the usual Content folder but with an xbox360 folder, when I put anything on the root of the usb or inside the xbox360 folder the xbox doesn't see it, when I am trying to see what's inside the usb it shows me the retial xbox browser, that is PROBABLY also why my hard drive doesn't show up, because it is formated in the rgh way with the Content folder.

@Neocazen I think that it is either the glitch chip or the nand, what do you think?

Probably the nand.. And it doesnt matter.. The internal hdd formats the same.. There is no rgh difference when formatting the internal hdd mate

Share this post


Link to post
Share on other sites
3 minutes ago, felida said:

Probably the nand.. And it doesnt matter.. The internal hdd formats the same.. There is no rgh difference when formatting the internal hdd mate

@Neocazen Ok, I do not have a backup of the nand dump, the guy rghed it didn't give it to me and I am not sure if he saved it. Is there anyway to flash the nand? (Remember the eject button doesn't work, so I can't get the cpu key)

Share this post


Link to post
Share on other sites
7 hours ago, r987_ said:

@Neocazen Ok, I do not have a backup of the nand dump, the guy rghed it didn't give it to me and I am not sure if he saved it. Is there anyway to flash the nand? (Remember the eject button doesn't work, so I can't get the cpu key)

You can easily get the cpukey.. Via dashlaunch.. Also.. You can force the eject button to work.. If you take off the faceplate and bridge 2 pins on it.. 

I assume your flat cable is messed up?? You can easily and cheaply replace that as well

Share this post


Link to post
Share on other sites
54 minutes ago, r987_ said:

@felida I don't have acces to dashlaunch though..

Yeah.. If aurora boots, you can place it there via ftp.. If you can get your fat32 USB to boot.. You can still get it there..

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...