Armandooooo 0 Posted August 2, 2019 Hi everyone, Considering I found a brand new xbox 360 slim. What would be the fuse status? Would it be set to the current dashboard or would they be burnt at the first ever boot? I am just curious if by chance I could remove the ability to burn fuse (R6T3 or similar) then manage to dowgrade and finally JTAG it. Is it possible? Thanks Quote Share this post Link to post Share on other sites
Dr.Gonzo 392 Posted August 2, 2019 You cant JTAG a Xbox Slim because all Slims are manufactured with new Bootloader that isnt JTAG-able. If your Slim isnt a Winchester Board you can RGH`ed your Xbox. 1 Quote Share this post Link to post Share on other sites
StaticPulse 261 Posted August 3, 2019 You're better off finding a Trinity with RRoD and reflow it then when you rebuild with RGH use really good thermal compound, clean it out thoroughly and in dashlaunch set it to not get any hotter than 60c and you won't really have anything to worry about. Mine was like that and it was on 24/7 until the PSU burnt itself out and it still boots! This is what I used. https://www.amazon.com/Thermaltake-Extreme-Performance-Heatsink-CL-O004-GROSGM/dp/B00O5VX6O2 Quote Share this post Link to post Share on other sites
Armandooooo 0 Posted August 6, 2019 Can you tell me where is located the bootloader? Isn'it in the nand? Quote Share this post Link to post Share on other sites
Dr.Gonzo 392 Posted August 6, 2019 The first bootloader is stored in CPU (ROM).Other are stored in Nand. Quote Share this post Link to post Share on other sites