JPizzle 0 Posted August 27, 2012 Simple 360 NAND Flasher By Swizzy *********************************** **************** * Requirements * **************** - A Hacked Xbox 360 (JTAG/RGH or similar) - A nand dump to write **************** * What it does * **************** - It’ll flash your motherboards nand with the supplied image using rawflash v4 *********** * Credits * *********** - cOz Thanks for all the help you constantly give me with just about everything, and thanks for rawflash! - Thanks also goes to who ever it was that ported rawflash to SDK in the first place and making it open source! Source: Homebrew-Connection.org **UPDATE** v1.1 – Added: Now able to dump your nand – Added: Now also writes a log of whatever output it gave to you on screen (except for current progress output) – Added: Timer, it now checks and tell you how long it took to perform the task (in seconds… if there is more then 60, you’ll have to calculate on your own how many minutes and so on it took ) – Fixed: Now properly turns off when you’ve flashed your NAND ** A Little word of warning: DO NOT exit the app after flashing… turn of your console after flashing it!! or you’ll not be particularly happy with what you see ** Simple_360_NAND_Flasher_v1.1.7z Quote Share this post Link to post Share on other sites
Novaflame411 0 Posted November 8, 2012 Hi there, Regarding the switching off part, is there a specific way of switching off the console or will the power button suffice? Quote Share this post Link to post Share on other sites
moses_373 151 Posted November 8, 2012 The power button will do fine. Quote Share this post Link to post Share on other sites