Upgrade to Kernel 17511 not working

[pedrostanaka 0]

Hello guys, 

I'm trying to upgrade my Xbox 360 (Corona v2 4GB) to the latest kernel 175711 in order to apply M$ avatar updates. But everytime I try to upgrade from my current version 16547 it flashes ok, but the version stays the same.

I thought it was because I had a very old version of kernel, so I first tried to upgrade to 16767 but even this one did not work.

Please find attached some images of my XeBuild config and my updflash.bin.

The tutorial I tried to follow is this one: http://forum.homebrew-connection.org/index.php?topic=144.0

updflash.bin

Thanks in advance you all!

Glitch/Nand Reader Product(s) used: Simple_360_NAND_Flasher_v1.2
Console Type: Corona V2 4G
NAND size: 4GB
Dashboard version: 2.0.16547.0
CB version: 
Screenshot of NAND details from J-Runner/Xebuild GUI:
(attach an image to your post)
J-Runner/Xebuild Gui log:
updflash.bin log (if applicable): in attachment

Description of problem: I try to upgrade the kernel version, the kernel version stays the same.updflash.bin

Was the console working before you started: Y

updflash.bin

xeBuild_GUI.log

[gavin_darkglider 1562]

Try using the updserv option.

1. Connect both your console, and computer to your network via cable, if not done already.

2. download dashlaunch installer, if you dont have it on your console already.

3. enable updserv option in dashlaunch, and leave the installer running.

4. open command prompt in the folder with xebuild.exe(not the GUI, in j-runner, this folder is called xebuild)

5. type xebuild update -f 17511

If this process doesnt fix the problem, then chances are your nand is bad, and it isnt allowing write processes to it. Also, this might build the image with dashlaunch, so if you end up at a stock xbox dash, then it updated, but you will need to use the dashlaunch installer. Also, without the avatar files included with xebuild, you will have to install those manually as well.