(unofficial) JRunner V0.5

[BenMitnicK 17]

 

Quote

ChangeLog V0.5

• Add support for xebuild 1.19
• Add support for DashLaunch 3.19
• Add support for Dash 2.0.17526.0
• Add support for Xell Reloaded MC Edition

ChangeLog V0.4

• Add support for xebuild 1.18
• Add support for DashLaunch 3.18.1
• improved UI

Download: JRunner

 

[Funky_Koval 1]

Thank you very much

[Blackjack 42]

Thank you Ben

[BenMitnicK 17]

your welcome

[gavin_darkglider 1534]

Not sure that this is any different than what I released way back when 17511 came out. That being said, if you have actually managed to reverse the code of J-Runner, it would be nice if the R-JTAG SMC patching for the reset limit was fixed. If my console doesnt boot in 4 or 5 glitches it goes to RROD.

[BenMitnicK 17]

On 14/08/2017 at 9:12 PM, gavin_darkglider said:

Not sure that this is any different than what I released way back when 17511 came out. That being said, if you have actually managed to reverse the code of J-Runner, it would be nice if the R-JTAG SMC patching for the reset limit was fixed. If my console doesnt boot in 4 or 5 glitches it goes to RROD.

Hi,

No the source code is in the GitHub

[gavin_darkglider 1534]

1 hour ago, BenMitnicK said:

Hi,

No the source code is in the GitHub

Didnt realize it was actually released.

[BenMitnicK 17]

2 hours ago, gavin_darkglider said:

Didnt realize it was actually released.

[Blackjack 42]

Quote

it would be nice if the R-JTAG SMC patching for the reset limit was fixed. If my console doesnt boot in 4 or 5 glitches it goes to RROD.

R-JTAG radio button in J-Runner does nothing on the latest Kernels (at least) except a (silly) Warning error on the Nand's building process.
It uses the JTAG(+/-Aud_Clamp) SMC that is (are) already patched for the five Reset limit on the Nand building.

However the reset limit is still there for the NandXell creation.

 

[gavin_darkglider 1534]

3 hours ago, Blackjack said:

R-JTAG radio button in J-Runner does nothing on the latest Kernels (at least) except a (silly) Warning error on the Nand's building process.
It uses the JTAG(+/-Aud_Clamp) SMC that is (are) already patched for the five Reset limit on the Nand building.

However the reset limit is still there for the NandXell creation.

 

All I got from this is that it is this post is useless. Anyone with an R-JTAG console knows this. As far as I can tell, the JTAG smcs are not pre patched for this. I wouldnt care if there were prebuilt SMC's for this problem, but originally when R-JTAG came out, as far as I understand, this issue was handled by SMC patching done by j-runner. Since that patching doesnt work anymore, it needs to be fixed. The one thing I dont get is why it doesnt work anymore. The SMC shouldnt have changed, and the CB definatly hasnt changed. The only thing I can think is that Microsoft changed some offsets in the nand image, but even that is a stretch, considering that R-JTAG uses JTAG image patching, which hasnt changed in years.

[Blackjack 42]

Quote

All I got from this is that it is this post is useless. Anyone with an R-JTAG console knows this. As far as I can tell, the JTAG smcs are not pre patched for this.

I misspoke. Indeed the JTAG smcs are not pre patched. But the final result is a nand built with its SMC reset limit patched.

Verify in your options.ini file that patch smc is set to true.

[gavin_darkglider 1534]

Yes, it is set to true. That is an xebuild option, not a j-runner option. This patch doesnt work on newer JTAG smc's, which is what the R-JTAG/R-JTAG+/R-JTOP use. J-Runner used to patch this into JTAG images also, if you clicked the R-JTAG box. Now, it gives an error in the build log, saying that it was unable to patch SMC. Probably because offests changed, or something. 

[gavin_darkglider 1534]

For what it is worth, if you modify the options_edited.ini, and make sure the patchsmc=true, then enable the the edited options in j-runner, and build your jtag image without the r-jtag checkbox enabled, it will skip the patching that j-runner does, and xebuild will patch the smc limit. the answer is in this function: https://github.com/stefanounick/J-Runner/blob/master/J-Runner/Nand/Nand.cs#L2701. I didnt go too deep into it, but from what I can tell, it is zeroing 2 bytes in the smc, which throws off the smc patching in xebuild. Not sure what the point of this patch is, but I am fairly certain that it doesnt have anything to do with the reset limit, as it never worked on my R-JTAG

[kuiponok 0]

On 29-7-2017 at 2:22 AM, BenMitnicK said:

 

Download: JRunner

 

Download site is off, can someone please give an alternative? Also can't download xeBuildGUI_V3.0.zip anymore, same problem, site off. Thanks

[gavin_darkglider 1534]

You can use the unofficial one I released that can be found It already has all of the dash files, and avatar update for a couple of the dashes, so it is kind of big, but essentially what you need. 

[BenMitnicK 17]

On 06/11/2017 at 5:03 PM, kuiponok said:

Download site is off, can someone please give an alternative? Also can't download xeBuildGUI_V3.0.zip anymore, same problem, site off. Thanks

Topic édited sorry 

[kuiponok 0]

@gavin_darkglider: Thanks you, nice release (y)

[RealSkyMods 0]

dose any one no how to read your nand with 

[gavin_darkglider 1534]

On 4/14/2018 at 1:58 PM, RealSkyMods said:

dose any one no how to read your nand with 

If you have the right hardware, and the drivers are installed, you click the big button in the top right that says..... Wait for it...... "Read Nand". I know it take a genius to read single syllable words on a screen these days..... Damn emoji's. lol. 

[BenMitnicK 17]

update

[baabox 3]

Thanks for the update. I really like this version without the ad banner.