Wanoxcide 0 Posted January 3, 2013 Hi guys so i am having a slight little problem with LiNK When i go test LiNK Settings evrything passes apart from UPNP Status I Have Passed All The Other Requirments Apart from that all my ports are open and upnp is enabled on my router please help i been trying this for about a week now and still no luck Thanks Liam // Wanoxcide Quote Share this post Link to post Share on other sites
jbp210 46 Posted January 3, 2013 Have you tried changing ports. Make sure you didn't set both ports the same. 1 Quote Share this post Link to post Share on other sites
Wanoxcide 0 Posted January 4, 2013 Have you tried changing ports. Make sure you didn't set both ports the same. Ok I did That And It Still Says The Same ? Quote Share this post Link to post Share on other sites
JPizzle 0 Posted January 4, 2013 don't worry about UPNP, as long as the other tests pass you should be fine. Quote Share this post Link to post Share on other sites
Wanoxcide 0 Posted January 4, 2013 don't worry about UPNP, as long as the other tests pass you should be fine. Oh Rite Thanks Quote Share this post Link to post Share on other sites
Vampiro2000 0 Posted January 4, 2013 My test keeps failing in UDP. What can I do? Changed ports, Static IP, disabled router firewall but still a no go.... Quote Share this post Link to post Share on other sites
jbp210 46 Posted January 4, 2013 Enable DMZ on your router. Its the easiest way if you are not familiar with forwarding ports Quote Share this post Link to post Share on other sites
Vampiro2000 0 Posted January 4, 2013 I don´t have DMZ on my router... Already forward ports Quote Share this post Link to post Share on other sites