devilhunter 11 Posted January 23, 2017 that would be worth trying. Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted January 24, 2017 I would also suggest removing the resistor on the top side CPU_RST point, and bridging the points. Then use the point on the header by the CPU for CPU_RST. Also, try putting the coolrunner on the cpu heatsync, so you can keep the wires as short as possible. 1 Quote Share this post Link to post Share on other sites
devilhunter 11 Posted January 24, 2017 4 hours ago, gavin_darkglider said: I would also suggest removing the resistor on the top side CPU_RST point, and bridging the points. Then use the point on the header by the CPU for CPU_RST. Also, try putting the coolrunner on the cpu heatsync, so you can keep the wires as short as possible. Tried that already. Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted January 24, 2017 If you want to send it to me, I bet you I can get it to glitch. Feel free to PM me about this. Quote Share this post Link to post Share on other sites
devilhunter 11 Posted January 24, 2017 Im surely considering that. 1 Quote Share this post Link to post Share on other sites
devilhunter 11 Posted February 5, 2017 On 1/24/2017 at 8:00 AM, gavin_darkglider said: If you want to send it to me, I bet you I can get it to glitch. Feel free to PM me about this. http://www.teamx360.co.uk/forum/-15432-s-development-section/rgh-1-2/rgh-1-2-jasper/3450-rapid-green-debug-led-flashing-rgh-1-2-wiring-on-cr3-rev-c/page2 Quote Share this post Link to post Share on other sites
gavin_darkglider 1562 Posted February 6, 2017 What is your point, that I replied on another forum?, Yes, it was me, and I stand by what I said, if you sent it to me, I could probably get it to glitch in a timely manor. Quote Share this post Link to post Share on other sites
StaticPulse 262 Posted May 13, 2017 On 1/21/2017 at 8:35 PM, devilhunter said: , it should be noted that some consoles (Jasper) are unglitchable. It's pretty rare to get across one ( actually glitches once after 2 mins !!!) You had a terrible timing profile if you couldn't do it with a chip. Jaspers usually glitch for me within15-20 seconds from boot. Thing is, You have to dick with them forever to get to glitch the first time, then afterwards use rater and get the proper settings. Quote Share this post Link to post Share on other sites
aliveronica 0 Posted December 20, 2018 i have one. its a falcon Korean region. with a flashed DVD Drive. all what i recommend is to open it and replace the cheap thermal paste with a good one Quote Share this post Link to post Share on other sites
aliveronica 0 Posted May 22, 2021 I sold my Jasper, falcon and a Zypher. However i jut got another Zypher on dash 7371 (Halo 3 console), Jtagable. I can sell it to you like this or Jtag it for you. Let me know if you still looking or interested. I might have a friend in Europe that has a Jasper of flacon, it should a jasper since its 256 MB console. Keep in mine these consoles are very price at this point due to rarity!!! Quote Share this post Link to post Share on other sites