Piotr Wawrzyczek 1 Posted December 20, 2016 HELP! After update xbox wont starti can only get into XELL relloed menui made updflash.bin file in xebuild gui but XELL wont boot itXELL see pendrivewhen i changed name to nandflash.bin and put into pendrive xenon.elf , XELL found Files start boot files but then turn on black screenhow to resotre config witch was before? 1 Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted December 20, 2016 don't put xenon.elf there and rename the bin to "updflash.bin" instead, this will run the same tool in XeLL instead of in Rawflash (rawflash don't support corona video) As long as you don't have a MMC Corona this should work fine... if you have a MMC Corona, you have to use hardware to fix it (same as when it was first hacked) Likely you selected something wrong when you built the image... Quote Share this post Link to post Share on other sites
Piotr Wawrzyczek 1 Posted December 20, 2016 wont boot it when i put only updflash.bin i dont know what corona i have. In Laucher wrote just Corona Quote Share this post Link to post Share on other sites
Piotr Wawrzyczek 1 Posted December 20, 2016 now i see "MMC CONSOLE DETECTED SKIP updflash.bin " so now i have to find some service? Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted December 20, 2016 now i see "MMC CONSOLE DETECTED SKIP updflash.bin " so now i have to find some service? Yes, unless you can solder yourself or whoever installed the hack in the first place left the connections intact on the console... Quote Share this post Link to post Share on other sites