Ahmad28 0 Posted January 29, 2016 Hi,I have read many tutorials on how to connect to system link. When I verify it, every thing except the last two, data port reachable and broadcast port reachable do not connect and fail. My upnp is enabled from the router and I am sure that my dashlaunch settings are perfect. I think there is some problem with the router settings. I have tried to change but still I get the same problems. Can anyone tell me the correct settings? Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted January 29, 2016 Try adding "Virtual Server" items for the ports used both protocols (UDP and TCP) If it still don't work, i don't know what it is... Quote Share this post Link to post Share on other sites
Ahmad28 0 Posted January 29, 2016 It did work before but now I changed the router to one which uses a sim card. I bought this one after it said that there is UPNP support. But after checking it out, I got a surprise when both data ports check failed. Anyways, I will try it out today and tell you the result. My data port is 1110 and broadcast port is 1111, can you tell me which one should be set to TCP and which one to UDP? Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted January 29, 2016 It did work before but now I changed the router to one which uses a sim card. I bought this one after it said that there is UPNP support. But after checking it out, I got a surprise when both data ports check failed. Anyways, I will try it out today and tell you the result. My data port is 1110 and broadcast port is 1111, can you tell me which one should be set to TCP and which one to UDP? Both are both TCP and UDP If you change it to be a "sim card" router, you probably also changed your connection and it's not actually a router now it's a modem with a built-in router? if you are using the sim card connection, that's why it doesn't work... Quote Share this post Link to post Share on other sites
