Rebelian23 6 Posted November 15, 2015 hi guys. So i need a little help here. I managed to get my dashboard updated to the one just before the latest one. But my problem is my DVD drive is not responding after that. I tested to see if my drive was faulty by loading my nand dump back on and the drive worked fine. So im guessing its the flash thats causing the problems. Is there a way to fix this? Possibly without having to go through the entire flash process again. I have a corona 4Gb motherboard RGH 2. Thank you in advance for any advice on how to go about this because in order to play BO3 i need to have this dash Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 15, 2015 Most likely you need the nofcrt patch, if you already enabled that, you probably don't need it... Quote Share this post Link to post Share on other sites
Rebelian23 6 Posted November 15, 2015 could you explain that please? Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 15, 2015 There's a patch which disable the FCRT.bin check, you probably need to use it... Quote Share this post Link to post Share on other sites
Rebelian23 6 Posted November 19, 2015 ok i checked that and nothing changed. Still wont read my disks Quote Share this post Link to post Share on other sites
Swizzy 2083 Posted November 20, 2015 Send me your nand dump that was working along with your cpukey and i'll check what's going wrong Quote Share this post Link to post Share on other sites